Содержание

1 iRidium for AVCiT
2 Description
- 2.1 Connection
- 2.2 Work in iRidium
  - 2.2.1 Setting Commands and Feedback Channels
    - 2.2.1.1 Command

iRidium for AVCiT

A set of tools to create control interfaces for equipment by AVCiT.

The documentation was updated on 20.6.2024

Description

iRidium for AVCiT - a set of tools to create control interfaces for video switching equipment by AVCiT.

Tested with equipment:

AVCIT DS2-H2H-IN-2K - HDMI input node with resolution up to 2K that supports H.264/H.265 codecs and can control LCD/LED displays and video walls with unlimited scalability.

AVCiT DS2-DH-OUT-2K - HDMI + DVI output node with resolution up to 2K , that supports H.264/H.265 codecs and can control LCD/LED displays and video walls with unlimited scalability.

Connection

To connect the AVCiT equipment, do the following:

1 Connect the equipment to the network;
2 Add the AVCiT driver to the created panel or server project and set the driver;
3 Attach commands and feedback channels to graphic items and set the required logic.

Work in iRidium

1 Add the AVCiT driver in the Devices tab to a created project:

2 Enter the driver connection settings:

Protocol - UDP;
Log Level - level of logging;
Host - IP address of equipment;
Port - port (48689 by default);
Script Mode - mode that defines where to send commands:
- Direct and Script - to send a command to equipment at once and copy it to the script;
- Script Only - to send a command only to script (when a button is pressed, a command, assigned to it, is not sent to equipment);
Display ID - ID of the output (RX) to which the driver is connected (it is set in the ID field, in the FBSsysTool app);
Driver Version - version of the driver.

Setting Commands and Feedback Channels

To control equipment set Commands. To set a command drag'n'drop a command on a graphic item and enter a Value to send.

Read more about work with graphic items in the "Types of graphic items" article.

Command

Command	Settings	Value *	Description
D&D command	Data - command data (a value can be received when a command is sent to equipment from the official app with the help of wireshark)	Any value	D&D images on a commutator.
Zoom command	Data - command data (a value can be received when a command is sent to equipment from the official app with the help of wireshark)	Any value	Zoom images on a commutator.
Switch video signal	Codec - video compression format H265/H264	ID TX (source of video)	To switch the video source for the selected display.
Switch audio signal	-	ID TX (source of sound)	To switch the sound source for the selected display.
Close video signal	-	Any value	To turn off the video.
Turn off audio signal	-	Any value	To turn off the audio.
Switch video signal	-	ID TX (source of sound)	To switch the sound source for the selected display.
Codec	-	H265 H264	Video codec

Value - the number specified when you drag'n'drop a command to a button. When you press this button, a command sends the specified value to equipment.