Эта страница является
переводом страницы
Akuvox. Перевод выполнен на 100%.
Review of Akuvox Touch Panels
Tested Devices
| Model |
Description |
Appearance |
|
Akuvox
C315S |
7, 1020х600, TFT matrix, 1 GB RAM, 12V power, PoE, Android 6.0.1 |
|
Akuvox
IT82R |
7, 1020х600, TFT matrix, 2 GB RAM, 12V power, PoE, Android 6.0.1 |
|
Akuvox
IT83R |
10, 1280x800, TFT matrix, 2 GB RAM, 12V power, PoE, Android 6.0.1 |
|
Review of HDL C315S touch control panel
C315S intercom monitor is a multifunctional communication device based on Android OS that can work as a sensor monitor in an apartment or office providing audio and video connection with call panels and other intercom monitors or IP-telephones, supporting SIP 2.0 protocol.
Thanks to the capability to install apps on the monitor a user can use C315S not only as an intercom, but also as a platform to control smart home devices or to connect to third-party services by service providers, maintenance companies and office center.
Power can be supplied to the panel over Ethernet or 12V stabilized voltage .
The panel does not have WiFI or Bluetooth.
The sensors responds to touch easily, that's why commands, that are sent by touching, are done very well.
The device does not have a battery and it improves its reliability and absence of camera provides privacy.
The panel does not have proximity and light sensors and it makes the panel a little less convenient in use, as the brightness of the screen can not be adjusted automatically depending on the time of day and the panel can't be activated when a person approaches it.
The panel has Android 6.0.1, but Google Play is not installed on it, that's why apps are installed only via APK file.
Akuvox С315S does not have a USB-port, so it can't be connected to a PC to set KIOSK-mode additionally.
Akuvox С315S intercom monitor does not have an accelerometer and it can't change the orientation of the screen, it means that the panel can be used only in the Landscape orientation.
The panel is made of ABS shock-resistant plastic, the front panel is made of aluminum. A bracket for wall-mountain goes with the panel. The panel is designed for mounting in a pattress box of European or American type.
As Google services are not installed on the panel, the device does not support PUSH-notifications, thus we do not recomment the panel for projects where push-notifications are required. In general, GB RAM allows to use the panel to work with small iRidium projects.
The device does not support installation of TF card to increase memory capacity.
| Parameter |
Akuvox С315S
|
| Display |
7,
TFT matrix,
1020x600 resolution,
170 PPI.
|
| Interfaces |
Ethernet,
PoE,
12V,
RS485,
Relay 1 output / 8 inputs,
Input to connect a doorbell: 1.
|
| Memory |
1 GB RAM
|
| Sensors |
No sensors
|
| Camera |
No
|
| Battery |
No,
PoE,
12V.
|
| Sound |
Mono sound
|
| Push-notifications |
No
|
| App market |
No
|
| Size |
200 x 132 x 17.5 mm.
|
| Mountain |
Mounted in the wall
|
| Processor |
ARMv7
|
According to Geekbench 4 test that measures the power of the system and its productivity, C315S panel scored Single - 315 points and Multi - 759 points. No points were scored in Compute due to test error. For comparison iPad Air 2 scored Single - 379 points and Multi - 1055 points. Compute is 759 points.
According to Antutu test that measures a device productivity the C315S panel scored 25285 points. For comparison, iPad Air 2 scores 62 728 points.
When 640x360px video is viewed on C315S, FPS is 23-25 units. The temperature during viewing corresponds to the technical requirements of the manufacturer.
When 640x360px video is viewed on iPad Air 2, FPS is 59-61 units.
Advantages and Disadvantages
As a results of the review advantages and drawbacks of C315S panel can be singled out:
Advantages:
- Ethernet to connect to local network
- Sensitive display;
- No battery;
- Bracket for wall-mounting;
- Input to connect a doorbell: 1;
- Relay contacts: 1 output / 8 inputs;
- PoE.
Disadvantages:
- Medium image quality;
- Outdated Android 6.0.1 version;
- No support of push-notifications;
- No sensors;
- No Wi-Fi or Bluetooth;
- No USB port;
- No portrait orientation;
- Standard launcher can't be turned off to work with Android;
- No open API to work with the panel, thus built-in devices (relay contats) can't be controlled;
- iRidium can't access RS485 port.
There is no RS485 port in new devices. Contact the manufacturer for more information.
Recommendations on Using Panel with iRidium
- Use it only with low-load porjects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on Panel
- Connect power to the panel and set access to the internet according to the manufacturer's manual;
- After a panel is started, press More > Settings > System Info;
- Press 10 times on User Permission;
- Choose Admin mode in the popup;
- Go to the main menu;
- Press Applications;
- Go to iridi.com website in the panel browser and download the latest version of i3 pro;
- Install i3 pro and log in.
The panel may ask a system password to open some menus or the panel browser, the password by default is 123456.
Review of IT82R Touch Control Panel
Akuvox IT82R is a multifunctional multimedia device that can be used as an intercom panel in an apartment or an ofice together with a SIP-panel by Akuvox, IP-telephones, IP-cameras and other devices. Thanks to support of the standard SIP protocol audio and video calls can be made with a video shown on a bright and clear 7 display equipped with 5 sensor buttons. Thanks to built-in Android OS the panel has an unrivaled flexibility in using third-party apps and can be the basis of intercom projects in modern apartment buildings and complexes.
The panel does not have Wi-Fi or Bluetooth.
The sensor is very responsive, that's why commands, given by touch are done well and clearly.
The device does not have a battery and it improves its reliability and absence of camera provides privacy.
Power can be supplied to the panel over Ethernet or 12V stabilized voltage. The panel does not have proximity or light sensors, thus it is a bit less convenient in use.
The device has Android 6.0.1 OS, but it does not have a preinstalled Google Play that is used to download and buy apps. That's why apps by iRidium and other apps are installed via APK file.
Akuvox IT82R does not have a USB-port and it limits iRidium use in the KIOSK-mode.
Akuvox IT82R does not have an accelerometer and it can't change the screen orientation, thus the panel can be used only in the Landscape orientation.
The panel does not have proximity and light sensors and it makes the panel a little less convenient in use, as the brightness of the screen can not be adjusted automatically depending on the time of day and the panel can't be activated when a person approches it.
The panel is made of ABS shock-resistant plastic, the front panel is made of aluminum. A bracket for wall-mountain goes with the panel.
The panel does not support PUSH notification, thus it is not recommended for projects where push-notifications are used. In general, 1 GB RAM allows to use the panel in smaller iRidium projects.
The device supports installation of TF card (SD) to increase memory capacity.
| Parameter |
Akuvox IT82R
|
| Display |
7,
TFT matrix,
1020x600 resolution,
170 PPI.
|
| Interfaces |
Ethernet,
PoE,
12V,
RS485,
Relay 1 output / 8 inputs,
SD card.
|
| Memory |
2 GB RAM
|
| Sensors |
No sensors
|
| Camera |
No
|
| Battery |
No,
PoE,
12V.
|
| Sound |
Mono sound
|
| Push-notifications |
No
|
| App market |
No
|
| Size |
232 x 160 x 21 mm.
|
| Mountain |
Mounted in the wall
|
| Processor |
ARMv7
|
According to Geekbench 4 test that measures the power of the system and its productivity, IT82R panel scored Single - 318 points and Multi - 831 points. No points were scored in Compute due to test error. For comparison iPad Air 2 scored Single - 379 points and Multi - 1055 points. Compute is 759 points.
According to Antutu test that measures a device productivity the IT82R panel scored 25568 points. For comparison, iPad Air 2 scores 62 728 points.
When 640x360px video is viewed on C315S, FPS is 23-25 units. The temperature during viewing corresponds to the technical requirements of the manufacturer.
Advantages and Disadvantages
As a results of the review advantages and drawbacks of IT82R panel can be singled out:
Преимущества:
- Ethernet to connect to local network
- Sensitive touch;
- No battery;
- Bracket for wall-mounting;
- Relay contacts: 1 output / 8 inputs;
- PoE;
- Buttons: 5 sensor buttons.
Disadvantages:
- Medium image quality;
- Outdated Android 6.0.1 version;
- No support of push-notifications;
- No sensors;
- No Wi-Fi or Bluetooth;
- No USB port;
- Standard launcher can't be turned off to work with Android;
- No open API to work with the panel, thus built-in devices (relay contats) can't be controlled;
- iRidium can't access RS485 port.
There is no RS485 port in new devices. Contact the manufacturer for more information.
Recommendations on Using Panel with iRidium
- Use it only with low-load projects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on Panel
- Connect power to the panel and set access to the internet according to the manufacturer's manual;
- After a panel is started, press More > Settings > System Info;
- Press 10 times on User Permission;
- Choose Admin mode in the popup;
- Go to the main menu;
- Press Applications;
- Go to iridi.com website in the panel browser and download the latest version of i3 pro;
- Install i3 pro and log in.
The panel may ask a system password to open some menus or the panel browser, the password by default is 123456.
Review of IT83R Touch Control Panel
Akuvox IT83R is an innovative multi-functional intercom device of premium class with 10 diagonal based on Android OS.
Capabilities of IT83R monitor are practically limitless. It can function as an intercom panel in an apartment or office together with Akuvox call panel or IP-telephones. It can also display video from IP-cameras. Thanks to support of the standard SIP protocol audio and video calls can be made with a video shown on a bright and clear 10 display. IT83R is one of the few devices on the market that has a built-in ATS for 100 subscribers.
Thanks to built-in Android OS the intercom monitor has an unrivaled flexibility in using third-party apps and introducing new functions For example, IT83R can be used as a basic hardware platform to launch smart home systems, information systems and at the same time perform its main intercom function in houses, townhouses and apartment complexes.
The panel does not have Wi-Fi or Bluetooth.
The sensor is very responsive, that's why commands, given by touch are done well and clearly.
The device does not have a battery and it improves its reliability and absence of camera provides privacy. Power can be supplied to the panel over Ethernet or 12V stabilized voltage. The panel does not have proximity and light sensors and it makes the panel a little less convenient in use, as the brightness of the screen can not be adjusted automatically depending on the time of day and the panel can't be activated when a person approaches it.
The device has Android 6.0.1 OS, but it does not have a preinstalled Google Play that is used to download and buy apps. That's why apps by iRidium and other apps are installed via APK file.
Akuvox IT83R does not have a USB-port and it limits iRidium use in the KIOSK-mode.
Akuvox IT83R intercom monitor does not have a USB-port and it limits iRidium use in the KIOSK-mode.
The panel is made of ABS shock-resistant plastic, the front panel is made of aluminum. A bracket for wall-mountain goes with the panel.
The panel does not support PUSH notification, thus it is not recommended for projects where push-notifications are used. In general, 2 GB RAM allows to use the panel in smaller iRidium projects.
The device supports installation of TF card (microSD) to increase memory capacity.
| Parameter |
Akuvox IT82R
|
| Display |
10 ,
TFT matrix,
128 x800 resolution,
151 PPI.
|
| Interfaces |
Ethernet,
PoE,
12V,
RS485,
Relay 2 outputa / 8 inputs,
micro SD.
|
| Memory |
2 GB RAM
|
| Sensors |
No sensors
|
| Camera |
No
|
| Battery |
No,
PoE,
12V.
|
| Sound |
Mono sound
|
| Push-notifications |
No
|
| App market |
No
|
| Size |
251 x 182.5 x 22 mm.
|
| Mountain |
Mounted in the wall
|
| Processor |
ARMv7
|
According to Geekbench 4 test that measures the power of the system and its productivity, IT82R panel scored Single - 302 points and Multi - 787 points. No points were scored in Compute due to test error. For comparison iPad Air 2 scored Single - 379 points and Multi - 1055 points. Compute is 759 points.
According to Antutu test that measures a device productivity the IT82R panel scored 23048 points. For comparison, iPad Air 2 scored 62 728 points.
When 640x360px video is viewed on IT83R, FPS is 23-25 units. The temperature during viewing corresponds to the technical requirements of the manufacturer.
Advantages and Disadvantages
As a results of the review advantages and drawbacks of IT83R panel can be singled out:
Advantages:
- Ethernet to connect to local network
- Sensitive touch;
- No battery;
- Bracket for wall-mounting;
- Relay contacts: 2 outputs / 8 inputs;
- PoE;
- Slot for memory card: 1 х Micro SD;
- Support of mini-ATS functions for 100 subscribers;
Disadvantages:
- Outdated Android 6.0.1 version;
- No support of push-notifications;
- No sensors;
- No Wi-Fi or Bluetooth;
- No USB port;
- Standard launcher can't be turned off to work with Android;
- No open API to work with the panel, thus built-in devices (relay contats) can't be controlled;
- iRidium can't access RS485 port.
There is no RS485 port in new devices. Contact the manufacturer for more information.
Recommendations on Using Panel with iRidium
- Use it only with low-load porjects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on Panel
- Connect power to the panel and set access to the internet according to the manufacturer's manual;
- After a panel is started, press More > Settings > System Info;
- Press 10 times on User Permission;
- Choose Admin mode in the popup;
- Go to the main menu;
- Press Applications;
- Go to iridi.com website in the panel browser and download the latest version of i3 pro;
- Install i3 pro and log in.
The panel may ask a system password to open some menus or the panel browser, the password by default is 123456.
Review of IT83R/IT83A Touch Control Panel
Akuvox IT83 is an innovative multi-functional intercom device of premium class with 10 diagonal based on Android OS.
Capabilities of IT83 monitor are practically limitless. It can function as an intercom panel in an apartment or office together with Akuvox call panel or IP-telephones. It can also display video from IP-cameras. Thanks to support of the standard SIP protocol audio and video calls can be made with a video shown on a bright and clear 10 display. IT83 is one of the few devices on the market that has a built-in ATS for 100 subscribers.
Thanks to built-in Android OS the intercom monitor has an unrivaled flexibility in using third-party apps and introducing new functions. For example, IT83 can be used as a basic hardware platform to launch smart home systems, information systems and at the same time perform its main intercom function in houses, townhouses and apartment complexes.
There is a difference between IT83R and IT83A models. IT83A allows you to connect via WiFi or Bluetooth, whereas IT83R does not has such a feature. The sensor responds easily to touch, so commands transmitted via touch are clear.
The device does not have a battery and it improves its reliability and absence of camera provides privacy. Power can be supplied to the panel over Ethernet or 12V stabilized voltage. The panel does not have proximity and light sensors and it makes the panel a little less convenient in use, as the brightness of the screen can not be adjusted automatically depending on the time of day and the panel can't be activated when a person approaches it.
The device has the Android 6.0.1 operating system, but does not have a pre-installed Google Play application store, with which you can install and purchase various applications, so iRidium and other applications are installed via an APK file.
Akuvox IT83 does not have a USB connector, so there are some limits for usage of iRidium in KIOSK-mode. The Akuvox IT83 intercom monitor does not have an accelerometer and the ability to change screen orientation, which means that the panel can only be used in one position (landscape orientation). The panel is made of impact-resistant ABS plastic, and the front panel is made of aluminum. The wall mounting bracket is included in the kit.
2 GB RAM allows you to use the panel in smaller iRidium projects. TF card (micro SD) can be installed to increase memory.
| Parameter |
Akuvox IT83R
|
| Display |
10 ,
TFT matrix,
1280 x 800 resolution,
151 PPI.
|
| Interfaces |
Ethernet,
Bluetooth (только IT83A),
WiFi (only IT83A),
PoE,
12V,
RS485,
Relay 2 output / 8 inputs,
micro SD.
|
| Memory |
2 GB RAM
|
| Sensors |
No sensors
|
| Camera |
No
|
| Battery |
No,
PoE,
Power supply via 12V.
|
| Sound |
Mono sound
|
| Push-notifications |
No*
|
| App market |
No
|
| Size |
251 x 182.5 x 22 mm.
|
| Installation |
Mounted in the wall
|
| Processor |
ARMv7
|
According to the Geekbench 4 test, which measures system power and is an indicator of performance, the IT83 panel scored Single - 303 and Multi - 787 points. It was not possible to determine the number of Compute points (test error). For comparison, the iPad Air 2 scored Single - 379 and Multi - 1055 points. Compute is 759 points.
According to the Antutu test, which measures device performance, the IT83 panel scored 23,048 points. By comparison, the iPad Air 2 scored 62,728.
When viewing a 640x360px video stream on IT83, FPS is 23-25 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
When viewing a 640x360px video stream on an iPad Air 2, FPS is 59-61 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
By default, push notifications are disabled on monitors. To activate, you must contact the manufacturer.
Advantages and Disadvantages
Based on the results of the review, we can highlight the main advantages and disadvantages of the IT83 panel:
Advantages:
- Ethernet to connect to the local network;
- Mounting bracket included;
- Relay contacts: 2 outputs / 8 inputs;
- Memory card slot: 1 x Micro SD;
- Support of local PBX functions for a group of up to 100 subscribers.
Disadvantages:
- Outdated Android version 6.0.1;
- Push-notifications are not supported;
- No WiFi and Bluetooth (IT83R model);
- There is no way to completely disable the standard launcher to work with Android;
- There is no open API for working with the panel, which makes it impossible to control built-in devices;
- It is impossible to access the RS485 port from iRidium;
RS485 is removed on new devices, please contact the manufacturer for more information.
Recommendations on Using the Panel with iRidium
- Use it only with low-load projects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on the Panel
- Connect power to the panel and set up Internet access according to the manufacturer’s instructions;
- After launching the panel, click More > Settings > System Info;
- Click 10 times on the User Permission menu item;
- Select Admin mode in the popup;
- Go to the main menu;
- Click Applications;
- Go to the iridi.com website via the panel's browser and download the latest version of i3Pro;
- Install i3Pro and authorize.
Kiosk-mode is not supported as you can't connect the panel via ADB. But there are some other options: launcher mode and application autostart.
Instructions for installing i3Pro in launcher mode
- Download the "i3 pro with KIOSK-mode" app from the website;
- Open the web-interface of the device and go to “Device” -> “Third party APK”;
- Go to the "App Installation" tab and click the Import button. Select the "i3 pro with KIOSK-mode" app;
- Start i3Pro and hide it. You will be asked to make the application the main one - please, agree.
Instructions for setting up autostart for the i3Pro application
- Open the web-interface of the device and go to the “Device” -> “Third party APK” tab;
- Go to the “Third Party APK Configuration” tab and open the drop-down list in the App Name line, select i3Pro;
- Check the boxes:
- “Start Up Enabled” - it launches the application when the device is turned on;
- “Turn Back App” - it allows the application to turn on automatically;
- “Turn Back App After Awakening” - it launches the application after waking up the screen;
- “APP Keep-Alive” – it allows the application to run in the background;
- “Turn Back App After Calling” – it launches the application after the call ends.
Click the “Submit” button.
The panel may require a system password to open some menu items or the panel browser, by default it is 123456.
Review of C315S/C315W touch control panel
C315 intercom monitor is a multifunctional communication device based on Android OS that can work as a sensor monitor in an apartment or office providing audio and video connection with call panels and other intercom monitors or IP-telephones, supporting SIP 2.0 protocol.
Thanks to the capability to install apps on the monitor a user can use C315 not only as an intercom, but also as a platform to control smart home devices or to connect to third-party services by service providers, maintenance companies and office center.
The panel is powered using PoE or stabilized voltage from 12V.
There is a difference between C315S and C315W models. C315W allows you to connect via WiFi or Bluetooth, whereas C315S does not has such a feature.
The sensor is very responsive, that's why commands, given by touch are done well and clearly.
The device does not have a battery and it improves its reliability and absence of camera provides privacy.
The panel does not have proximity and light sensors and it makes the panel a little less convenient in use, as the brightness of the screen can not be adjusted automatically depending on the time of day and the panel can't be activated when a person approaches it.
The device has the Android 6.0.1 operating system, but does not have a pre-installed Google Play application store, so to install iRidium and other applications, download APK files.
Akuvox С315 does not have a USB-port, so it can't be connected to a PC to set KIOSK-mode additionally.
The Akuvox C315 intercom monitor does not have an accelerometer and the ability to change screen orientation, which means that the panel can only be used in one orientation (landscape orientation).
The panel is made of ABS shock-resistant plastic, the front panel is made of aluminum. A bracket for wall-mountain goes with the panel. The panel is designed for installation in a European or American type socket box.
1 GB RAM allows you to use the panel in smaller iRidium projects.
TF card (micro SD) can be installed to increase memory.
| Parameter |
Akuvox С315S/C315W
|
| Display |
7,
TFT matrix,
1020x600 resolution,
170 PPI.
|
| Interfaces |
Ethernet,
Bluetooth (only C315W),
WiFi (only C315W),
PoE,
12V,
RS485,
Relay 1 output / 8 inputs,
Input for connecting a call: 1.
|
| Memory |
1 GB RAM
|
| Sensors |
No sensors
|
| Camera |
No
|
| Battery |
No,
PoE,
Power supply via 12V.
|
| Sound |
Mono sound
|
| Push-notifications |
No*
|
| App market |
No
|
| Size |
200 x 132 x 17.5 mm.
|
| Installation |
Mounted in the wall
|
| Processor |
ARMv7
|
According to the Geekbench 4 test, which measures system power and is an indicator of performance, the C315 panel scored Single - 315 and Multi - 759 points. It was not possible to determine the number of Compute points (test error). For comparison, the iPad Air 2 scored Single - 379 and Multi - 1055 points. Compute is 759 points.
According to the Antutu test, which measures device performance, the C315 panel scored 25,285 points. By comparison, the iPad Air 2 scored 62,728.
When viewing a 640x360px video stream on C315, FPS is 23-25 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
When viewing a 640x360px video stream on an iPad Air 2, FPS is 59-61 units.
- By default, push notifications are disabled on panels. To activate, you must contact the manufacturer.
Advantages and Disadvantages
Based on the results of the review, we can highlight the main advantages and disadvantages of the C315 panel:
Advantages:
- Ethernet to connect to local network;
- Sensitive display;
- No battery;
- Bracket for wall-mounting;
- Input to connect a doorbell: 1;
- Relay contacts: 1 output / 8 inputs;
- PoE.
Disadvantages:
- Medium image quality;
- Outdated Android 6.0.1 version;
- No support of push-notifications;
- No sensors;
- No Wi-Fi or Bluetooth (C315S model);
- No USB port;
- No portrait orientation;
- Standard launcher can't be turned off to work with Android;
- No open API to work with the panel, thus built-in devices (relay contacts) can't be controlled;
- iRidium can't access RS485 port.
{{i} There is no RS485 port in new devices. Contact the manufacturer for more information.
Recommendations on Using the Panel with iRidium
- Use it only with low-load projects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on the Panel
- Connect power to the panel and set up the Internet access according to the manufacturer’s instructions;
- After launching the panel, click More > Settings > System Info;
- Click 10 times on the User Permission menu item;
- Select Admin mode in the popup;
- Go to the main menu;
- Click Applications;
- Go to the iridi.com website via the panel's browser and download the latest version of i3Pro;
- Install i3Pro and authorize.
Kiosk-mode is not supported as you can't connect the panel via ADB. But there are some other options: launcher mode and application autostart.
Instructions for installing i3Pro in launcher mode
- Download the "i3 pro with KIOSK-mode" app from the website;
- Open the web-interface of the device and go to “Device” -> “Third party APK”;
- Go to the "App Installation" tab and click the Import button. Select the "i3 pro with KIOSK-mode" app;
- Start i3Pro and hide it. You will be asked to make the application the main one - please, agree.
Instructions for setting up autostart for the i3Pro application
- Open the web-interface of the device and go to the “Device” -> “Third party APK” tab;
- Go to the “Third Party APK Configuration” tab and open the drop-down list in the App Name line, select i3Pro;
- Check the boxes:
- “Start Up Enabled” - it launches the application when the device is turned on;
- “Turn Back App” - it allows the application to turn on automatically;
- “Turn Back App After Awakening” - it launches the application after waking up the screen;
- “APP Keep-Alive” – it allows the application to run in the background;
- “Turn Back App After Calling” – it launches the application after the call ends.
Click the “Submit” button.
The panel may require a system password to open some menu items or the panel browser, by default it is 123456.
Review of IT88A Touch Control Panel
IT88A intercom panel has a wide range of capabilities: it can be used as an intercom panel in an apartment or office, in connectiin with an entrance or individual Akuvox panel or IP phones. It can display video from IP cameras. The panel supports SIP, so high-quality audio and video calls can be viewed on the bright and clear 10-inch touchscreen.
The built-in Android operating system allows you to use third-party applications and add new functions. It makes IT88A an ideal platform for smart homes and information systems. It also provides simultaneous performance of basic intercom functions in various types of living spaces.
The panel can connect via WiFi or Bluetooth.
The sensor is very responsive, that's why commands, given by touch are done well and clearly.
It should be noted that this device does not have a built-in battery, which increases its reliability. The panel is powered via PoE or stabilized voltage 12V. The lack of proximity and light sensors makes the panel less convenient to use, since it does not allow you to automatically adjust the display brightness depending on the time of day or activate the panel when approaching it.
The device has the Android 9.0. operating system, but does not have a pre-installed Google Play application store, so to install iRidium and other applications, download APK files.
Also, a memory card slot allows you to expand the available space for storing data.
Akuvox IT88A does not have a USB-port and it limits iRidium use in the KIOSK-mode.
The Akuvox IT88A intercom panel does not have an accelerometer and the ability to change screen orientation, which means that the panel can only be used in one orientation (landscape orientation).
The panel is made of plastic. A bracket for wall-mountain goes with the panel.
2 GB RAM allows you to use the panel in smaller iRidium projects.
| Parameter |
Akuvox С315S/C315W
|
| Display |
10 ,
IPS LCD matrix,
1280 x 800 resolution,
150 PPI.
|
| Interfaces |
Ethernet,
Bluetooth,
WiFi,
PoE,
12V,
RS485,
Relay 2 outputs / 8 inputs
|
| Memory |
RAM 2GB / ROM 8GB
|
| Sensors |
No sensors
|
| Camera |
1 megapixel, CMOS
|
| Battery |
No,
PoE,
Power supply via 12V.
|
| Sound |
Mono sound
|
| Push-notifications |
No*
|
| App market |
No
|
| Size |
251 x 182.5 x 29.75 mm.
|
| Installation |
Wall or tabletop
|
| Processor |
ARM Amlogic
|
According to the Geekbench 4 test, which measures system power and is an indicator of performance, the IT88A panel scored Single - 837, Multi - 2078, Compute - 1468 points. For comparison, the iPad Air 2 scored Single - 379 and Multi - 1055 points. Compute is 759 points.
According to the Antutu test, which measures device performance, the IT88A panel scored 63,921 points. By comparison, the iPad Air 2 scored 62,728.
When viewing a 640x360px video stream on IT88A, FPS is 38-49 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
When viewing a 640x360px video stream on an iPad Air 2, FPS is 59-61 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
By default, push notifications are disabled on panels. To activate, you must contact the manufacturer.
Advantages and Disadvantages
Based on the results of the review, we can highlight the main advantages and disadvantages of the IT88A panel:
Advantages:
- Ethernet to connect to local network;
- Sensitive display;
- No battery;
- WiFi and Bluetooth;
- Front camera (1MP);
- Memory card slot;
- Bracket for wall-mounting;
- Relay contacts: 2 outputs / 8 inputs;
- PoE.
Disadvantages:
- Outdated Android 9.0 version;
- No sensors;
- No USB port;
- Standard launcher can't be turned off to work with Android;
- No open API to work with the panel, thus built-in devices can't be controlled;
- iRidium can't access RS485 port.
There is no RS485 port in new devices. Contact the manufacturer for more information.
Recommendations on Using the Panel with iRidium
- Use it only with low-load projects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on the Panel
- Connect power to the panel and set up the Internet access according to the manufacturer’s instructions;
- After launching the panel, click More > Settings > System Info;
- Click 10 times on the User Permission menu item;
- Go to the main menu;
- Go to the web-interface from PC in the same local network: enter IP address in the browser address bar;
- Log in (default: admin – admin);
- Click Device > Third Party APK. Go to the App Installation section and click the Import button, then select the desired apk file on your PC (download the i3Pro apk file from the iRidi official website);
- After installation, a notification will appear in the web interface, it means that i3Pro is ready for use.
Kiosk-mode is not supported as you can't connect the panel via ADB. But there are some other options: launcher mode and application autostart.
Instructions for installing i3Pro in launcher mode
- Download the "i3 pro with KIOSK-mode" app from the website;
- Open the web-interface of the device and go to “Device” -> “Third party APK”;
- Go to the "App Installation" tab and click the Import button. Select the "i3 pro with KIOSK-mode" app;
- Start i3Pro and hide it. You will be asked to make the application the main one - please, agree.
Instructions for setting up autostart for the i3Pro application
- Open the web-interface of the device and go to the “Device” -> “Third party APK” tab;
- Go to the “Third Party APK Configuration” tab and open the drop-down list in the App Name line, select i3Pro;
- Check the boxes:
- “Start Up Enabled” - it launches the application when the device is turned on;
- “Turn Back App” - it allows the application to turn on automatically;
- “Turn Back App After Awakening” - it launches the application after waking up the screen;
- “APP Keep-Alive” – it allows the application to run in the background;
- “Turn Back App After Calling” – it launches the application after the call ends.
Click the “Submit” button.
The panel may require a system password to open some menu items or the panel browser, by default it is 123456.
Review of X933W Touch Control Panel
Akuvox presents a new series of intercoms "X", which combine the latest technology and stylish design, which was created by an Italian design bureau. The updated interface provides maximum user convenience, with basic functions available in just a few taps. With a powerful new generation processor and Android 9.0 operating system, this intercom can be used with smart home control applications. Ideal for modern apartments and villas.
X933W intercom panel has a wide range of capabilities: it can be used as an intercom panel in an apartment or office, in connection with an entrance or individual Akuvox panel or IP phones. It can display video from IP cameras. The panel supports SIP, so high-quality audio and video calls can be viewed on the bright and clear 7-inch touchscreen.
The built-in Android operating system allows you to use third-party applications and add new functions. It makes X933W an ideal platform for smart homes and information systems. It also provides simultaneous performance of basic intercom functions in various types of living spaces.
The panel can connect via Wi-Fi or Bluetooth.
The sensor is very responsive, that's why commands, given by touch are done well and clearly.
The device does not have a battery and it improves its reliability and absence of camera provides privacy. Power can be supplied to the panel via PoE or 12V stabilized voltage. The panel does not have proximity and light sensors and it makes the panel a little less convenient in use, as the brightness of the screen can not be adjusted automatically depending on the time of day and the panel can't be activated when a person approaches it.
The device has the Android 9.0 operating system, but does not have a pre-installed Google Play application store, so to install iRidium and other applications, download APK files.
Akuvox X933W does not have a USB-port and it limits iRidium use in the KIOSK-mode.
The Akuvox X933W intercom panel does not have an accelerometer and the ability to change screen orientation, which means that the panel can only be used in one orientation (landscape orientation).
The panel is made of plastic. A bracket for wall-mountain goes with the panel.
2 GB RAM allows you to use the panel in smaller iRidium projects.
| Parameter |
Akuvox X933W
|
| Display |
7,
IPS LCD matrix,
1280x800 resolution,
216 PPI.
|
| Interfaces |
Ethernet,
Bluetooth,
WiFi,
PoE,
12V,
RS485,
Relay 2 outputs / 8 inputs
|
| Memory |
RAM 2GB / ROM 8GB
|
| Sensors |
No sensors
|
| Camera |
No
|
| Battery |
No,
PoE,
Power supply via 12V.
|
| Sound |
Mono sound
|
| Push-notifications |
No*
|
| App store |
No
|
| Size |
205 x 148 x 27.5 mm.
|
| Installation |
Mounted in the wall
|
| Processor |
ARM Amlogic
|
According to the Geekbench 4 test, which measures system power and is an indicator of performance, the X933W panel scored Single - 867, Multi - 2230, Compute - 1560 points. For comparison, the iPad Air 2 scored Single - 379 and Multi - 1055 points. Compute is 759 points.
According to the Antutu test, which measures device performance, the X933W panel scored 66,549 points. By comparison, the iPad Air 2 scored 62,728.
When viewing a 640x360px video stream on X933W, FPS is 40-52 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
When viewing a 640x360px video stream on an iPad Air 2, FPS is 59-61 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
By default, push notifications are disabled on panels. To activate them, you must contact the manufacturer.
Advantages and Disadvantages
Based on the results of the review, we can highlight the main advantages and disadvantages of the X933W panel:
Advantages:
- Ethernet to connect to local network;
- Sensitive display;
- No battery;
- WiFi and Bluetooth;
- Bracket for wall-mounting;
- Relay contacts: 2 outputs / 8 inputs;
- PoE.
Disadvantages:
- Outdated Android 9.0 version;
- Push-notifications are not supported;
- No sensors;
- No USB port;
- Standard launcher can't be turned off to work with Android;
- No open API to work with the panel, thus built-in devices can't be controlled;
- iRidium can't access RS485 port;
- No slot for memory card.
There is no RS485 port in new devices. Contact the manufacturer for more information.
Recommendations on Using the Panel with iRidium
- Use it only with low-load projects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on the Panel
- Connect power to the panel and set up the Internet access according to the manufacturer’s instructions;
- After launching the panel, click More > Settings > System Info;
- Click 10 times on the User Permission menu item;
- Select Admin mode;
- Go to the main menu;
- Go to the web-interface from PC in the same local network: enter IP address in the browser address bar;
- Log in (default: admin – admin);
- Click Device > Third Party APK. Go to the App Installation section and click the Import button, then select the desired apk file on your PC (download the i3Pro apk file from the iRidi official website);
- After installation, a notification will appear in the web interface, it means that i3Pro is ready for use.
Kiosk-mode is not supported as you can't connect the panel via ADB. But there are some other options: launcher mode and application autostart.
Instructions for installing i3Pro in launcher mode
- Download the "i3 pro with KIOSK-mode" app from the website;
- Open the web-interface of the device and go to “Device” -> “Third party APK”;
- Go to the "App Installation" tab and click the Import button. Select the "i3 pro with KIOSK-mode" app;
- Start i3Pro and hide it. You will be asked to make the application the main one - please, agree.
Instructions for setting up autostart for the i3Pro application
- Open the web-interface of the device and go to the “Device” -> “Third party APK” tab;
- Go to the “Third Party APK Configuration” tab and open the drop-down list in the App Name line, select i3Pro;
- Check the boxes:
- “Start Up Enabled” - it launches the application when the device is turned on;
- “Turn Back App” - it allows the application to turn on automatically;
- “Turn Back App After Awakening” - it launches the application after waking up the screen;
- “APP Keep-Alive” – it allows the application to run in the background;
- “Turn Back App After Calling” – it launches the application after the call ends.
Click the “Submit” button.
The panel may require a system password to open some menu items or the panel browser, by default it is 123456.
Review of S567W Touch Control Panel
S567W intercom panel has a wide range of capabilities: it can be used as an intercom panel in an apartment or office, in connectiin with an entrance or individual Akuvox panel or IP phones. It can display video from IP cameras. The panel supports SIP, so high-quality audio and video calls can be viewed on the bright and clear 10-inch touchscreen.
Thanks to built-in Android OS the intercom monitor has an unrivaled flexibility in using third-party apps and introducing new functions. For example, S567W can be used as the main hardware platform to launch smart home systems, information systems and at the same time perform its main intercom function in houses, townhouses and apartment complexes.
The panel supports WiFi 6 and Bluetooth. Two microphones and four speakers provide good sound quality.
The sensor is very responsive, that's why commands, given by touch are done well and clearly.
The device does not have a battery and it improves its reliability. Absence of camera provides privacy. Power can be supplied to the panel via PoE or 12V stabilized voltage. The panel does not have proximity and light sensors and it makes the panel a little less convenient in use, as the brightness of the screen can not be adjusted automatically depending on the time of day and the panel can't be activated when a person approaches it.
The device has the Android 12.0. operating system, but does not have a pre-installed Google Play application store, so to install iRidium and other applications, download APK files.
Akuvox S567W does not have a USB-port and it limits iRidium use in the KIOSK-mode.
The Akuvox S567W intercom panel does not have an accelerometer and the ability to change screen orientation, which means that the panel can only be used in one orientation (landscape orientation).
The panel is made of plastic. A bracket for wall-mountain goes with the panel.
4 GB RAM allows you to use the panel in medium iRidium projects.
| Parameter |
Akuvox S567W
|
| Display |
10 ,
IPS LCD matrix,
1280 x 800 resolution,
151 PPI.
|
| Interfaces |
Ethernet,
Bluetooth,
WiFi,
PoE,
12V,
RS485,
Relay 2 outputs / 8 inputs
|
| Memory |
RAM 4GB / ROM 16GB
|
| Sensors |
No sensors
|
| Camera |
No
|
| Battery |
No,
PoE,
Power supply via 12V.
|
| Sound |
Stereo
|
| Push-notifications |
No*
|
| App store |
No
|
| Size |
278 x 164 x 22.8 mm.
|
| Installation |
Wall or tabletop
|
| Processor |
ARM Rockship
|
According to the Geekbench 4 test, which measures system power and is an indicator of performance, the S567W panel scored Single - 783, Multi - 2008, Compute - 1672 points. For comparison, the iPad Air 2 scored Single - 379 and Multi - 1055 points. Compute is 759 points.
According to the Antutu test, which measures device performance, the S567W panel scored 94,445 points. By comparison, the iPad Air 2 scored 62,728.
When viewing a 640x360px video stream on S567W, FPS is 56-59 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
When viewing a 640x360px video stream on an iPad Air 2, FPS is 59-61 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
By default, push notifications are disabled on panels. To activate them, you must contact the manufacturer.
Advantages and Disadvantages
Based on the results of the review, we can highlight the main advantages and disadvantages of the S567W panel:
Advantages:
- Ethernet to connect to local network;
- Sensitive display;
- No battery;
- WiFi and Bluetooth;
- Relay contacts: 2 outputs / 8 inputs;
- PoE;
- Android 12.0.
Disadvantages:
- Push-notifications are not supported;
- No sensors;
- No USB port;
- Standard launcher can't be turned off to work with Android;
- No open API to work with the panel, thus built-in devices can't be controlled;
- iRidium can't access RS485 port;
- No slot for memory card.
There is no RS485 port in new devices. Contact the manufacturer for more information.
Recommendations on Using the Panel with iRidium
- Use it only with low-load projects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on the Panel
- Connect power to the panel and set up the Internet access according to the manufacturer’s instructions;
- After launching the panel, click More > Settings > System Info;
- Click 10 times on the User Permission menu item;
- Select Admin mode;
- Go to the main menu;
- Go to the web-interface from PC in the same local network: enter IP address in the browser address bar;
- Log in (default: admin – admin);
- Click Device > Third Party APK. Go to the App Installation section and click the Import button, then select the desired apk file on your PC (download the i3Pro apk file from the iRidi official website);
- After installation, a notification will appear in the web interface, it means that i3Pro is ready for use.
Kiosk-mode is not supported as you can't connect the panel via ADB. But there are some other options: launcher mode and application autostart.
Instructions for installing i3Pro in launcher mode
- Download the "i3 pro with KIOSK-mode" app from the website;
- Open the web-interface of the device and go to “Device” -> “Third party APK”;
- Go to the "App Installation" tab and click the Import button. Select the "i3 pro with KIOSK-mode" app;
- Start i3Pro and hide it. You will be asked to make the application the main one - please, agree.
Instructions for setting up autostart for the i3Pro application
- Open the web-interface of the device and go to the “Device” -> “Third party APK” tab;
- Go to the “Third Party APK Configuration” tab and open the drop-down list in the App Name line, select i3Pro;
- Check the boxes:
- “Start Up Enabled” - it launches the application when the device is turned on;
- “Turn Back App” - it allows the application to turn on automatically;
- “Turn Back App After Awakening” - it launches the application after waking up the screen;
- “APP Keep-Alive” – it allows the application to run in the background;
- “Turn Back App After Calling” – it launches the application after the call ends.
Click the “Submit” button.
The panel may require a system password to open some menu items or the panel browser, by default it is 123456.
Review of C319A Touch Control Panel
The C319A intercom panel has a wide range of capabilities: it can be used as an intercom panel in an apartment or office, in connectiin with an entrance or individual Akuvox panel or IP phones. It can display video from IP cameras. The panel supports SIP, so high-quality audio and video calls can be viewed on the bright and clear 10-inch touchscreen.
Thanks to built-in Android OS the intercom monitor has an unrivaled flexibility in using third-party apps and introducing new functions. For example, C319A can be used as the main hardware platform to launch smart home systems, information systems and at the same time perform its main intercom function in houses, townhouses and apartment complexes.
The panel can connect via Wi-Fi or Bluetooth.
The sensor is very responsive, that's why commands, given by touch are done well and clearly.
The device does not have a battery and it improves its reliability. To supply the panel, you can use PoE or stabilized voltage of 12V. However, it is worth noting that the panel does not have proximity or light sensors, which limits its ease of use. This means you can't automatically adjust the display brightness based on the time of day or activate the panel when you approach it.
The device has the Android 9.0 operating system, but does not have a pre-installed Google Play application store, so to install iRidium and other applications, download APK files.
Akuvox C319A does not have a USB-port and it limits iRidium use in the KIOSK-mode.
The Akuvox C319W intercom panel does not have an accelerometer and the ability to change screen orientation.
The panel can only be used in one orientation (landscape orientation).
The panel is made of plastic. A bracket for wall-mountain goes with the panel.
2 GB RAM allows you to use the panel in smaller iRidium projects.
The device supports installation of TF card (SD) to increase memory capacity.
| Parameter |
Akuvox C319A
|
| Display |
10 ,
IPS LCD matrix,
1280 x 800 resolution,
151 PPI.
|
| Interfaces |
Ethernet,
Bluetooth,
WiFi,
PoE,
12V,
RS485,
Relay 2 outputs / 8 inputs
|
| Memory |
RAM 2GB / ROM 8GB
|
| Sensors |
No sensors
|
| Camera |
1 megapixel, CMOS
|
| Battery |
No,
PoE,
Power supply via 12V.
|
| Sound |
Mono sound
|
| Push-notifications |
No*
|
| App store |
No
|
| Size |
215 x 182.5 x 29.75 mm.
|
| Installation |
Wall or tabletop
|
| Processor |
ARM Amlogic
|
According to the Geekbench 4 test, which measures system power and is an indicator of performance, the C319A panel scored Single - 854, Multi - 2070, Compute - 1476 points. For comparison, the iPad Air 2 scored Single - 379 and Multi - 1055 points. Compute is 759 points.
According to the Antutu test, which measures device performance, the C319A panel scored 64,06o points. By comparison, the iPad Air 2 scored 62,728.
When viewing a 640x360px video stream on C319A, FPS is 39-50 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
When viewing a 640x360px video stream on an iPad Air 2, FPS is 59-61 units. The temperature of the device while watching a video stream meets the stated technical requirements of the manufacturer.
By default, push notifications are disabled on panels. To activate them, you must contact the manufacturer.
Advantages and Disadvantages
Based on the results of the review, we can highlight the main advantages and disadvantages of the C319A panel:
Advantages:
- Ethernet to connect to local network;
- Sensitive display;
- No battery;
- WiFi and Bluetooth;
- Bracket for wall-mounting;
- Relay contacts: 2 outputs / 8 inputs;
- PoE;
- Slot for memory card.
Disadvantages:
- Outdated Android 9.0 version;
- Push-notifications are not supported;
- No sensors;
- No USB port;
- Standard launcher can't be turned off to work with Android;
- No open API to work with the panel, thus built-in devices can't be controlled;
- iRidium can't access RS485 port.
There is no RS485 port in new devices. Contact the manufacturer for more information.
Recommendations on Using the Panel with iRidium
- Use it only with low-load projects;
- Use it only in projects with minimum animation and effects of the Blur type;
- We do not recommend using a video stream with a resolution higher than 720х480.
Manual on Installing iRidium on the Panel
- Connect power to the panel and set up the Internet access according to the manufacturer’s instructions;
- After launching the panel, click More > Settings > System Info;
- Click 10 times on the User Permission menu item;
- Select Admin mode;
- Go to the main menu;
- Go to the web-interface from PC in the same local network: enter IP address in the browser address bar;
- Log in (default: admin – admin);
- Click Device > Third Party APK. Go to the App Installation section and click the Import button, then select the desired apk file on your PC (download the i3Pro apk file from the iRidi official website);
- After installation, a notification will appear in the web interface, it means that i3Pro is ready for use.
Kiosk-mode is not supported as you can't connect the panel via ADB. But there are some other options: launcher mode and application autostart.
Instructions for installing i3Pro in launcher mode
- Download the "i3 pro with KIOSK-mode" app from the website;
- Open the web-interface of the device and go to “Device” -> “Third party APK”;
- Go to the "App Installation" tab and click the Import button. Select the "i3 pro with KIOSK-mode" app;
- Start i3Pro and hide it. You will be asked to make the application the main one - please, agree.
Instructions for setting up autostart for the i3Pro application
- Open the web-interface of the device and go to the “Device” -> “Third party APK” tab;
- Go to the “Third Party APK Configuration” tab and open the drop-down list in the App Name line, select i3Pro;
- Check the boxes:
- “Start Up Enabled” - it launches the application when the device is turned on;
- “Turn Back App” - it allows the application to turn on automatically;
- “Turn Back App After Awakening” - it launches the application after waking up the screen;
- “APP Keep-Alive” – it allows the application to run in the background;
- “Turn Back App After Calling” – it launches the application after the call ends.
Click the “Submit” button.
The panel may require a system password to open some menu items or the panel browser, by default it is 123456.
