CAME BPT

Эта страница является переводом страницы CAME BPT. Перевод выполнен на 100%.

Содержание

1 iRidium for CAME BPT
2 Tested devices:
3 Setting CAME BPT video intercom
4 Working in iRidium studio
- 4.1 Setting a button to open the door
5 Demo project

iRidium for CAME BPT

Setting CAME BPT SIP Video Intercom to Work with iRidium

documentation was last updated on 22.10.2021

Tested devices:

Model	Description	Appearance
CAME BPT MTMV/IP	video module

Setting CAME BPT video intercom

1 Connect power to CAME BPT MTM call panel
2 Connect the call panel to the same local network with your control panel
3 Set the call panel in PCS/XIP app

4 Go to this address http://192.168.1.5 in a browser of a control panel
5 Select INSTALLER in the "LOGIN MODE" field. The default password is 112233

6 Go to the Date and Time tab and set date, time and time zone. Then select Save button.

7 Activate a created SIP account - to do it, go to the Cedentials tab and then to the GENERIC SIP tab. Click the edit icon.

8 Select Enabled in the State field, set password and click save.

Working in iRidium studio

1 Create a panel project.
2 Add SIP driver and set it.

The most important settings are marked with red.

Host - enter the IP-address of the call-panel (default address -192.168.1.5 )
Port - port of the call panel (always "5060" according to the SIP standard)
SIP ID - username of the SIP account activated in step 7 of this manual
Password - password of the SIP account activated in step 7 of this manual
Use SIP TONE - true, generate SIP messages of tone dial
Use DTMF Tone - false, do not generate regular messages of tone dial
Codec PCMU - true, activation of G.711μ audio coder
Codec PCMA - true, activation of G.711a audio coder
Codec H264 - true, activation of H.264 video coder

Deactivate other coders (false)

3 Add graphi items to the project and set them.

4 Add the following script to the project:

outdoor_station_number = "0101010100"; // topological code of IPerVoice panel
var SIP = IR.GetDevice("SIP");   // name of SIP driver
var action = "CALL";             // default action
ButtonAction = IR.GetItem("Page 1").GetItem("Button_action");
LabelName = IR.GetItem("Page 1").GetItem("Label_name");
LabelNumber = IR.GetItem("Page 1").GetItem("Label_number");
SwitchVideo = IR.GetItem("Page 1").GetItem("Switch_video");
 
IR.AddListener(IR.EVENT_START,0,function()
{
  // display the SIP video
  IR.GetItem("Page 1").GetItem("Video").GetState(0).Image = "sip_image://";
});
 
IR.AddListener(IR.EVENT_TAG_CHANGE, SIP, function(name, value) {
  if (name == "STATUS") {
    var flagReady = (value == "On Hook..." || value == "Incoming Call...");
    ButtonAction.Enable = flagReady;
    var flagTalk = (value == "Talking...");   
    IR.GetItem("Page 1").GetItem("Button_door").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button1").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button2").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button3").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button4").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button5").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button6").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button7").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button8").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button9").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button0").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button_asterisk").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button_octothorp").Enable = flagTalk; 
    var flagConnect = (value == "Dialing..." || value == "Trying..." || value == "Ringing..." || value == "Talking..."
    || value == "Not Found..." || value == "Not Acceptable..." || value == "Not Available..." || value == "Service Unavailable...");
    IR.GetItem("Page 1").GetItem("Button_cancel").Enable = flagConnect;
    SwitchVideo.Enable = !flagConnect;
    if (value == "Incoming Call...") {
      action = "ANSWER";
      LabelName.Text = SIP.GetFeedback("INCOMING CALL NAME");
      LabelNumber.Text = SIP.GetFeedback("INCOMING CALL NUMBER");
    }
    if (value != "Incoming Call..." && value != "Talking...") {        
      action = "CALL";
      LabelName.Text = "---";
      LabelNumber.Text = outdoor_station_number;   
    }   
    var flagShow = (flagReady || flagConnect || flagTalk);
    LabelName.Visible = flagShow;
    LabelNumber.Visible = flagShow;             
  }		
});
 
function Talk() {
  SIP.SetFeedback("NUMBER", outdoor_station_number); // when calling number is required         
  SIP.Set(action, SwitchVideo.Value);                // call or answer, audio or audio+video
}

5 Set graphic items to interact with the SIP driver and the script.

Setting a button to open the door

When a button on a call panel is pressed, a call begins. To open the door, a digital code must be sent, it can be set in the settings of the call panel (default digital code - “*50”)
1 Create a new script.
2 Add the following to it:

function SIPsendtone1(){
var SIPdevice1=IR.GetDevice("SIP");
SIPdevice1.Set("SEND TONE", 10); // отправка “*”
SIPdevice1.Set("SEND TONE", 5);// отправка “5”
SIPdevice1.Set("SEND TONE", 0);// отправка “0”
}

3 Creatre a button and assign to it the call of this script.

Demo project

Download Demo project

The panel project contrains:

a display, showing video from the camera of the call panel in real time
a keyboard to dial a number,
a call/answer button,
a cancel button,
a button to open the door,
display of the current status,
display of subscriber's data (name, number),
volume settings of the speaker and the microphone of i3 pro panel.