Эта страница является переводом страницы I3 KNX Limiting Functions of a Control Panel. Перевод выполнен на 100%.

---

I3KNX

Limiting Functions of a Control Panel

Limiting Functions of a Control Panel

Manual on setting i3 KNX in the launcher and kiosk modes.

It works only on Android devices.

Setting a Panel

Panel settings may differ on different versions of Android.

1 Reset a panel.;

It is done on all panels in the settings of the "Reset and restore" menu.

2 Skip all settings when a panel is launched.;
Do not set personal accounts on the panel, it will disturb the setting of a kiosk mode..
3 Connect a panel to a PC via a USB cable.;
4 Turn on "Debug via USB" in developer's settings.;

If there are no "Developer's settings" in the settings of your panel, enter the "About device" menu and press several times on the buid number..

5 Download and install Kiosk-mode;
6 Log in the app;

7 Install SDK Platform-tools on a PC.
8 Unpack the archive;
9 Launch the command line;
10 Write in the command line the path to the folder where you unpacked the archive and launch adb shell;
Launch commands look like this:
cd C:\Users\User\Downloads\platform-tools_r28.0.2-windows\platform-tools
adb shell

If everything is done correctly, there will appear a command line of the device where you want to install the kiosk mode..

shell@gt510lte:/ $

11 Enter the following in the command line:
dpm set-device-owner com.iridium.knx_v100.kiosk/workdata.DeviceAdminHelper
If everything is successful, there will appear a message:

Success: Device owner set to package com.iridium.knx_v100.kiosk
Active admin set to component {com.iridium.knx_v100.kiosk/workdata.DeviceAdminHelper}

After a panel is set correctly the i3 KNX kiosk app can be deleted from the device only by resetting it.

Launcher mode

The launcher mode limits functions of a panel. The app is launchd by default at the panel start.
i3 KNX, that was started in the launcher mode, blocks "Back" and "Home" buttons and does not allow to close itself.

Setting the launcher mode

1Do all actions in setting a panel section.;
2When i3 KNX is launched press the "Home" button on the panel. There will appear a message about using the i3 KNX app by default. Press "ALWAYS".

If such a notification did not appear, go to the panel settings and enter the "Apps" section.

Go to the settings section.

Enter Home app.

Install i3 KNX kiosk as a launcher.

Exiting the launcher mode

To exit the launcher mode, press the "Menu" button and go to the panel settings.

Enter the "Apps" section.

Go to the settings section.

Enter Home app.

Install a standard launcher

Kiosk mode

"Kiosk mode" is a limitation on panel use to only one app. When i3 KNX is launched in the kiosk mode, a user can't use other functions of this panel.

Setting the kiosk mode

1 Set your panel according to the manual above.

2 Press the gear icon on the start page of the i3 KNX app and choose Kiosk mode (the kiosk mode can be installed before or after authorization in the app).

3 Turn on the Kiosk mode. Set and confirm a PIN-code (consists of 4 digits), using which the mode can be turned off.