Эта страница является переводом страницы INELS RF. Перевод выполнен на 100%.

---

iRidium for INELS Wireless Control

how iRidium server gets access to INELS Wireless network

The documentation was updated on 27.6.2022

Advantages

INELS Wireless network includes the following system components:

• eLAN-RF-003, eLAN-RF-Wi-003 - adapters of LAN TCP/IP commands to RF signal,
• RF Touch-B, RF Touch-W - touch panels with wireless interface,
• RFGSM-220M - multifunctional GSM-controller,
• RFRP-20 - RF signal repeater,
• D-Link DCS-933L/E - interior video camera.

The series of INELS Wireless devices also includes relays, switches, dimmers, thermostats, leakage sensors, electricity meters, remotes, etc.

Use eLAN-RF gateways to integrate INELS Wireless devices and iRidium.

Setting INELS Wireless Gateway

1 Enter the web-interface of eLAN-RF gateway, using admin login and elkoep password by default.

The gate gets the dynamic IP address by default, that's why a router with an activated function of DHCP server is required for the device to get an address.

2 Click the gear icon for setting.

3 Click "+" to add a new wireless device to the network. Supply power to the device (line supply or from batteries depending on the type).

4 Set the device parameters. Click the Create button.

• Product Type: type of a device,
• Address (hex): unique address of a device (6 symbols written on the body of the device),
• Label: any text to identify a device,
• Type: type of a device (not compulsory, it determines the icon of a device).

5 Click "+"to add a new room. Set the room parameters (any).

6 Click Continue. Go to the Devices tab and click on the added device to add its icon to the created room. Click Create.

7 Point a cursor to the icon of a device and a popup must appear. Remember the number - the address assigned to the device.

8 You can add all devices to the INELS Wireless network this way. If everything is set correctly, you can control wireless devices directly from the web-interface and get data from the devices.

Pay attention also to the other settings, such as the frequency of the radio signal.

Working in iRidium studio

1 Create a panel or a server project

2 Add INELS Wireless Network (TCP) driver to the project:

3 Set the driver:

• Log Level: the level of logging,
• Host: IP address of the gateway,
• Login: login to access the web-interface of the gateway (admin by default),
• Password: password to access the web-interface of the gateway (elkoep by default).
• Keep Alive: an interval to check TCP connection. In case there is no answer to the Keep Alive request, the driver state is obligatorily switched to "turned off".

4 Add a device from the list. Set the Address parameter of the device - it's the address, assigned earlier when configuring the network in the web-interface of eLAN-RF gateway.

5 All devices of the wireless network are added and set this way. Each device has its own individual address.

Work with Commands and Feedbacks

To control equipment it is required to set Commands and Feedbacks. To send a command, drag'n'drop it on a graphic item and enter a value to send. To display feedback drag'n'drop a feedback channel on a graphic item and choose how to output or display a value.

Read more about work with graphic items in the "Types of graphic items" article.

Below you can find information about commands and feedback of INELS Wireless Control devices.

General Commands and Feedback

Tag	Type of tag	Admissible values	Description
Automat	Command Feedback	false, true	Activating work by schedule
Battery	Feedback	false - low battery, true - normal	Battery level

HeatCoolArea

Conditioning system

Tag	Type of tag	Admissible values	Description
Correction	Command Feedback	from -5.0 to 5.0 °C with a step of 0.5	Shifts current min and max temperatures
Mode	Command Feedback	1 - auto, 2 - holiday, 3 - manual, 4 - temporary manual	Sets the current mode
Power	Command Feedback	0 - off, 1 - heating on, 2 - cooling on	Power
Controll	Feedback	1 - auto, 2 - holiday, 3 - manual, 4 - temporary manual	Displays the current mode
Cooling	Feedback	false, true	Cooling on
Heating	Feedback	false, true	Heating on
Requested temperature	Feedback	From 0.0 to 32.0 °C with a step of 0.5	Required temperature. It is calculated on the basis of the temperature mode and Correction temperature.
Temperature	Feedback	From 0.0 to 32.0 °C with a step of 0.5	Actual temperature

RF-RGB-LED-550, RFDA-73M/RGB

Multicolored dimmable lamp

Tag	Type of tag	Admissible values	Description
Brightness	Command Feedback	From 0 to 255	Brightness
Demo	Command Feedback	false, true	Demo mode to change colors
Blue	Command Feedback	From 0 to 255	The blue component
Green	Command Feedback	From 0 to 255	The green component
Red	Command Feedback	From 0 to 255	The red component

RF-White-LED-675

White dimmable lamp

Tag	Type of tag	Admissible values	Description
Brightness	Command Feedback	From 0 to 255	Brightness
White balance	Command Feedback	From 0 to 255	White balance: 0 - cold, 255 - warm

RFATV-1

Mechanism to control a valve

Tag	Type of tag	Admissible values	Description
Open window off time	From 0 to 60 min with a step of 10	Time when the valve is turned off
Open window sensitivity	Command Feedback	0 - off, 1 - 1.2 °C, 2 - 0.8 °C, 3 - 0.4 °C	Threshold sensitivity to temperature changes. If temperature changes within 1 minute exceed the threshold value, the valve is turned of for Open window off time period.
Requested temperature	Command Feedback	From 0,0 to 32,0 °C with a step of 0,5	Required temperature
Error	Feedback	false, true	Error: - the valve is not mounted, - the possible movement range is too short, - the closing point is not detected
Locked	Feedback	false, true	Control is blocked
Open valve	Feedback	From 0 to 100 %	The degree of valve opening: 0 % - closed, 100 % - completely open
Open window	Feedback	false, true	Timer of open window state is started
Temperature	Feedback	From 0.0 to 32.0 °C with a step of 0.5	Real temperature

RFDA-11B, RFDA-71B, RFDAC-71B, RFDEL-71B, RFDSC-11

Dimmers

Tag	Type of tag	Admissible values	Description
Brightness	Command Feedback	From 0 to 100 with a step of 10	Brightness
Decrease: Set time	Command Feedback	From 2 to 1800 sec with a step of 1	Time to reduce bightness from max to min
Increase: Set time	Command Feedback	From 2 to 1800 sec with a step of 1	Time to increase brightness from min to max.

RFGA-1

Relay to open doors

Tag	Type of tag	Admissible values	Description
Close	Command	null	Close
Open	Command	null	Open
Stop	Command	null	Stop
close	Command	null	Close to an intermediate position
open	Command	null	Open to an intermediate position
Direction	Feedback	"up", "down"	Direction of motor rotation
Doors	Feedback	1 - open 2 - open in an intermediate position 3 - closed in an intermediate positions 4 - closed	Door position
Motor	Feedback	false, true	Motor is running
Sensor	Feedback	"closed", "opened"	State of sensor
Tamper	Feedback	"closed", "opened"	Sensor of motor tamper
Validity sensor	Feedback	false, true	State of malfunction sensor

RFJA-12B

Relay to control blinds

Tag	Type of tag	Admissible values	Description
Roll down	Command	null	Close
Roll up	Command	null	Open
Set time	Command Feedback	From 2 to 240 sec with a step of 1	Set/get the opening/closing time.
Stop	Command	null	Stop
On	Feedback	false, true	Moving
Roll up	Feedback	false - closed, true - open	State of blind (tag value does not change in intermediate positions)

RFMD-100, RFWD-100

Motion sensors, door/window open sensors

Tag	Type of tag	Admissible values	Description
Deactivate	Command	null	Turn off alarm (the detector is not turned off)
Disarm	Command Feedback	false, true	Turn off detector
Detect	Feedback	false, true	Detector signal
Tamper	Feedback	"closed", "opened"	Sensor of motor tamper

RFSA-11B, RFSA-61B, RFSA-61M, RFSA-62B, RFSA-66M, RFSAI-61B, RFSC-61, RFUS-61

Relay

Tag	Type of tag	Admissible values	Description
On	Command Feedback	false, true	Turn on (turned on)
Delayed off: Set time	Command Feedback	From 2 to 3600 sec	Set the time limit to turn off
Delayed on: Set time	Command Feedback	From 2 to 3600 sec	Set the time limit to turn on
Delay	Feedback	false, true	Time counting is active
Locked	Feedback	false, true	Control is blocked

RFSF-1B

Leakage sensor

Tag	Type of tag	Admissible values	Description
Detect	Feedback	false, true	Detector signal

RFSTI-11B, RFSTI-11G, RFTC-10G, RFTI-10B

RFSTI-11B, RFSTI-11G, RFTC-10G - thermostats with a built-in sensor
RFTI-10B - 2-zone temperature sensor

Tag	Type of tag	Admissible values	Description
On	Feedback	false, true	Turn on
Locked	Feedback	false, true	Control is blocked
Temperature	Feedback	From -99 to +99 °C, -99 °C - wire break, +99 °C - short circuit	Temperature
Temperature IN	Feedback	From -99 to +99 °C, -99 °C - wire break, +99 °C - short circuit	Internal temperature
Temperature OUT	Feedback	From -99 to +99 °C, -99 °C - wire break, +99 °C - short circuit	External temperature

Links to the manufacturer's website:
https://elkoep.com
https://inels.com