Эта страница является
переводом страницы
IR P7. Перевод выполнен на 100%.
Control panel iRidium Panel 7
Setup and Work with iRidium P7
iRidium P7 - a panel for control Smart home and IoT devices via projects created in iRidium Mobile apps.
Specification
| Name |
Description
|
| Screen size |
7"
|
| Screen resolution |
1920x1200
|
| Pixels per inch |
170 ppi
|
| Technology of screen manufacture |
IPS
|
| Brightness |
300 cd/m2
|
| Viewing angles (horizontal /vertical) |
not less 170°
|
| External edge lighting |
yes
|
| Size |
108.4 x 179.4 x 31.4 mm
|
| Processor model |
MediaTek
|
| Number of cores |
4
|
| Processor frequency |
1.3 GHz
|
| Processor configuration |
RK3368, Cortex-A53 64Bit, Octa cores,1.2 GHz
|
| Video processor |
Mali-450MP4
|
| RAM |
2 GB
|
| Internal memory |
16 GB
|
| Operating system |
Android 7.1.2
|
| Ethernet |
RJ 45, USB-A (OTG), CAN
|
| Network |
10/100/1000 Ethernet, Wi-Fi (IEEE 802.11 b/g/n), Bluetooth 4.0
|
| Power |
12 V, PoE 802.af
|
| Internal speaker |
1xSPEAKER (8 Ohm 1 W)
|
| Built-in microphone |
1xMIC
|
Kiosk mode
“Kiosk mode” is a mode limiting the user to run only one app. When starting i3 Pro in the kiosk mode the user cannot use other functions of the panel.
How to set up the kiosk mode
Activation of the kiosk mode on the panel iR P7 is made by the Fully Kiosk Browser app.
1 In order to activate the kiosk mode log in the Fully Kiosk Browser app.
2 Activate the app system menu. It can be made depending on the app settings in one of the following ways:
- left-to-right swipe or hold the "Back" button;
- 5 quick presses in any part of the screen;
- 2 presses in the upper left corner of the screen and 2 presses in the lower right corner.
3 Go to Settings
4 Find the Kiosk Mode option in the menu. Select it.
5 Click on the Enable Kiosk Mode option in the list. Here you can also set up the command for activating the system menu (Kiosk Exit Gesture) and the password to enter the system menu (Kiosk Mode PIN).
6 Click “back”
7 You will see a notification where you need to click “YES”. The app will be closed then
8 Restart the Fully Kiosk Browser app. Click “OK, OPEN SETTINGS” in the appeared message
9 Now you need to set up the Fully Kiosk Browser app so it started by default when the panel is turned on. In order to do that go to the Launcher section
10 Select Fully Kiosk Browser in the list and click Change
Now the kiosk mode is activated and the user can use only the i3 Pro app.
Exiting the kiosk mode
If you need to exit the kiosk mode, follow the instructions.
1 Move a finger from top to bottom of the screen 5 times and click “Home” on the panel.
The i3 Pro app will be closed and the menu for app selection will appear. Activate the system menu. Depending on the settings it can be done in one of the following ways:
- left-to-right swipe or hold the "Back" button;
- 5 quick presses in any part of the screen;
- 2 presses in the upper left corner of the screen and 2 presses in the lower right corner.
2 Select Kiosk Mode in the settings menu
3 Deactivate the kiosk menu
Now the user will be able to use the panel functions.
Reset to factory settings
In order to reset the panel to factory settings you need to exit the [#Exiting the kiosk mode|kiosk mode].
If you have access to all panel functions (the kiosk mode is disabled), go to the panel settings. It can be done in several ways:
- Find the Settings icon on the panel desktop
- Swipe from top to bottom to activate the panel menu and click the Settings icon
Go to Advanced settings in the settings menu
Go to Backup & reset.
Select Factory data reset
The reset will delete all data from the panel.
Click Reset tablet
Highlighting control
Edge highlighting is available on iR P7
You can access it from the i3 Pro project using the IR.SetLEDBacklight script method.
There are 3 basic colors available at the moment: red, green and blue.
Create a new script in the project:
//for red color:
IR.SetLEDBacklight(255, 0, 0);
page.GetItem("color_Light").GetState(0).FillColor = 0xff0000ff;
//for green color:
IR.SetLEDBacklight(0, 255, 0);
page.GetItem("color_Light").GetState(0).FillColor = 0x00ff00ff;
//for blue color:
IR.SetLEDBacklight(0, 0, 255);
page.GetItem("color_Light").GetState(0).FillColor = 0x0000ffff;
