Panel iR P7

Эта страница является переводом страницы IR P7 PoE. Перевод выполнен на 100%.

Содержание

1 iRidium Panel 7
2 Technical specification
3 Special Features of iRidium Panel 7
4 CAN bus77
5 Manual on Mounting the Panel
6 Kiosk mode
7 Reset to default settings.
8 Factory reset
9 Control of lighting
10 Visualization Interface
11 Work with iRidium Pro

iRidium Panel 7

iRidium P7 is panel to control smart home equipment and IoT devices with the help of a project created in apps by iRidium Mobile.

Info on setting the previous version of the panel is here

The warranty for iRidium Panel 7 is 2 years.

Technical specification


Name	Description
Screen size	7"
Screen resolution	1920x1200
Pixels per inch	170 ppi
Technology of screen manufacture	IPS
Brightness	300 cd/m2
Viewing angles (horizontal /vertical)	not less than 170°
External side lighting	yes
Size	108.4 x 179.4 x 31.4 mm
Processor model	MediaTek
Number of cores	4
Processor frequency	1.3 GHz
Processor configuration	RK3368, Cortex-A53 64Bit, Octa cores,1.2 GHz
Video processor	Mali-450MP4
RAM	2 GB
Internal memory	16 GB
Operating system	Android 7.1.2
Interfaces	RJ 45, USB-A (OTG), CAN bus77
Network	10/100/1000 Ethernet, Wi-Fi (IEEE 802.11 b/g/n), Bluetooth 4.0
Power	12 V, PoE 802.af
Built-in speaker	1xSPEAKER (8 Ohm 1 W )
Built-in microphone	1xMIC

Special Features of iRidium Panel 7

1 A screensaver with a waiting time of no more than 10 minutes is obligatory in projects.

2 The panel does not support Push-notifications.

3 There is no Google or Play Market.

4 Use projects with a resolution no more than 1920×1200. Check the bandwidth of the network to broadcast a video stream.

5 Limit the use of Blur effects and animation, as they can decrease productivity.

6 Use iRidium server in projects with a lot of logic and scripts, thus, you reduce the workload on the panel.

7 It is not recommended to ise the panel with i3 lite app.

8 To prevent screen flickering, use "safe values" (40-100 % of brightness) to turn off light gradually, after it the brightness of the screen can be set to 0%.

9 The panel does not support automatic change of orientation. To change the orientation of the panel, open a fast access menu with a swipe from top to bottom and press a button to change the orientation of the screen (Rotation).

CAN bus77

iRidium Panel 7 had a built-in CAN bus that works via bus77 protocol. Thus, the panel can control devices working via bus 77 protocol directly without IP-gateway.

Manual on Mounting the Panel

Mounting in a pattrress box:
1 Put the fixing frame (it goes with a panel) to a standard pattrress box and fix it with two screws.
2 Install the panel to the fixing frame (magnetic fixture)
3 Screw up the screw to fix the panel in the frame.

The fixing screw can be screwed up no more than 6 full circles. After screwing more after this limitation (touch of the plastic limitation) the body of the panel can be damaged.

Semi-recessed mounting of the panel:
1 Install the metal box for semi-recessed mounting in the prepared opening in the wall. Fix the box with 4 fixators.
2 Install the fixing frame (goes with the box) in the box and fix it with 3 screws
3 Install the panel in the fixing frame (magnetic fixture). Check that the panel is installed horizontally and that the body of the panel touches the wall evenly (The horizontal line can be corrected by loosening the screws of the fixing frame).

When semi-recessed mounting, the fixing screw is not used.

Standard metal box for semi-recessed mounting can be installed in the wall with thickness from 15 to 32 mm.

Kiosk mode

"Kiosk mode" is a limitation on panel use to only one app. When i3 pro is launched in the kiosk mode, a use can't use other functions of this panel.

More about setting and activating kiosk mode is written in the limitation of functions of a control panel article.

Reset to default settings.

To reset a panel to default settings, first leave the Kiosk mode.
If general functions of a panel are already available (the kiosk mode is off), enter the panel settings. It can be done in three ways:

Find the Settings icon on the desktop of the panel
Swipe from top to bottom to call the panel menu and press the Settings icon.

Go to Advanced settings in the settings menu

Find the Backup & reset section. Enter it.

Select Factory data reset.

Reset to default settings will delete all data from a panel. Press Reset tablet.

Factory reset

If you can’t reset to factory settings in the panel interface, do the following:

1. Turn off the panel;

2. Press the “Volume” button in the pinhole next to the “Power” button;

3. While holding down the “Volume” button, press the “Power” button until the recovery menu appears;

4. Press the “Volume” button until you place the cursor to the “wipe user data/factory reset” option;

5. To confirm your choice, press the “Power” button and the panel will reset to factory settings;

6. Reboot the panel.

Control of lighting

Side lighting is available on iRidium Panel 7.
The lighting can be accessed right from a project for i3 pro with the help of a script method - IR.SetPanelBacklight.
Syntax

IR.SetPanelBacklight(imax, brightness, color)

On input	Value	Description
imax	1 - 4	type: Number
brightness	0 - 255	type: Number brightness of lighting
color	0 - turned off, 1 - blue, 2 - green, 3 - light blue, 4 - red, 5 - violet, 6 - yellow, 7 - white.	type: Number the color of lighting.

Create a new script in a project and add to it an example to turn on side lighting

//example to turn on side lighting of green color:
IR.AddListener(IR.EVENT_ITEM_RELEASE, IR.GetPage("Page 1").GetItem("Item 1"), function()
{
   IR.SetPanelBacklight(4, 255, 2);
   //IR.GetPage("Page 1").GetItem("color_Light").GetState(0).FillColor = 0x0000ffff;
   IR.Log("green");
});

Example: iRidium Panel 7

Visualization Interface

When you buy iRidium Panel 7, you'll get a present, an interface designed specially for the panel in horizontal and vertical orientations.

The project contains:

"Home" page with buttons to go to rooms and activate scenes;
Several pages with rooms (kitchen, bed-room, living room);
Pages for different types of equipment (light, climate, cameras, multimedia, blinds and security).

A visualization interface can be created in iRidium Studio or our ready interfaces can be used.

Work with iRidium Pro

We made a comparison test between iRidium Panel 7and iPad Air 2. You can see the results of the test in the video below.

Video comparing the loudspeakers and the microphone of a panel to those of iPad Air 2 and iPad PRO:

Video comparing the sound quality of iRidium Panel 7 and iPad Air: