iRidium KNX Server ("Pobeda")

Installation and launch of iRidium Server on the "Pobeda" hardware platform

the documentation is updated 24.6.2016

iRidium KNX Sever (Pobeda) - it's a software implementation of iRidium Server. It is launched as a service on Pobeda controllers.

To use iRidium Server you need a license for iRidium 3

Available only for Russia and CIS

Specification:

See the shot specifications

Pobeda.KNX

Debian Linux 7.0
Processor and memory: 454 MGz ARM9, 128Mb DDR2, 4 Gb eMMC
GSM/GPRS, Wi-Fi 802.11n, Bluetooth 4.0, radio 315/433 MGz (optional), Z-wave (optional), IR In-Out (extrnal)
Port: KNX, Ethernet 10/100, USB 2.0, 2хRS-485, CAN, 1-wire

Pobeda.Lite

Debian Linux 7.0
Processor and memory: 454 MGz ARM9, 128Mb DDR2, 4 Gb eMMC
GSM/GPRS, Wi-Fi 802.11n, Bluetooth 4.0, radio 315/433 MGz (optional), Z-wave (optional), IR In-Out (extrnal)
Port: Ethernet 10/100, USB 2.0, 2хRS-485, CAN, 1-wire

Recommended load:

5 of control panels
up to 200 of iRidium Server tags

iRidium Server connects to equipment and sends commands from control panels to it. The control panels connect to the server to control equipment through it, get feedback, download logs and databases.

The database can store information about server work for the time since the server was launched. The control panels can output logs from the database and build graphs of changes in server variables.

You can control iRidium Server via the command string (PuTTY) and from the web-interface.

Installation and Setting up

Upload the iridiumserver_1.0.0-5593_WB.deb file on your device by any means available. For example,you can use the util Sshfs Manager to install the device hard disk on your PC.

You need to get access to the device console with the help of the SSH-client. To install iRidium Server use the following command:

dpkg –i iridiumserver_1.0.0-5593_WB.deb

After the installation you can launch iRidium Server. The first launch of the server lasts for some time - do not disconnect the power supply and wait until the process is over.

You can see that the process is finished by Search in iRidium Transfer. You can also go to the web-interface and input the device IP-address and port 8888 in the browser address string.

To launch the server, go to the folder of server location and input the command of server launch:

сd /iridiumserver/

./iridium