software for receiving serial numbers of controllers used in Site licensing
Serial number - the controller identifier required for activation of iRidium Site License. It is used only for AMX, Crestron, KNX, KNX IP BAOS, HDL, Global Cache, Helvar equipment. Serial numbers of controllers have to be received via the iRidium Util application of the iRidium software package.
Receiving serial numbers (and Site licensing) is possible only for AMX controllers of the NI (700, 900, 2100, 3100, 4100) and NX series. Serial numbers of other АМХ controllers cannot be used for activation of Site licenses.
Do not rewrite serial numbers manually! Any error will lead to non-operability of your license!
in the drop-down list
"Site License (LM)" can be activated for such devices as Logic machine 2, Logic machine 3 or Logic machine 3 Re:actor. But the license can also be used for any KNX IP router with support of the KNXnet/IP Tunneling protocol. The name of the license is based on the fact that LM devices enable up to 10 concurrent connections with the bus, KNX IP BAOS - up to 5 connections, standard KNX IP routers - only 1 connection to the bus at a time.
Serial numbers can be received only for the IP module SB-DN-1IP (generation 4), Factory Model: HDL-MBUS01IP.431
The module HDL-MBUS01IP.431 has to have the firmware HDL_V04.03U
Serial numbers can be received locally only (being in one network with the IP module)
Serial numbers can be requested from all models of Global Cache network converters
Site Licenses for Helvar support: HelvarNet (TCP), HelvarNet (UDP).
Site Licenses for Helvar do not support: HelvarNet Internal (UDP), Helvar AV (RS232).