Содержание

1 iRidium for Intesis
2 Description
3 Work in iRidium

iRidium for Intesis

a set of tools to create control interfaces for equipment in the Intesis bus.

the documentation is updated 23.8.2021

Example: Intesis

Description

iRidium for Intesis is a set of tools that allow to create an interface to control Intesis climate equipment.

The driver works with gateways from the Home Automation group of interfaces. A full list of equipment is available on the official website.

Connection To set equipment, download the Intesis MAPS app via this link and do the following:

1 Start the Intesis MAPS app and go to the Home Automation tab (Start > Create New Project > Home Automation);

2 Choose the Panasonic protocol (Device Protocol > Panasonic);

3 Go to the General tab and enter the name of the gateway, connection settings and a password;

4 Up to 64 conditioners can be connected to each Panasonic line. Add conditioners with the help of a built-in scanner or mannually;

5 To connect to equipment, go to the Connection tab and choose one of the available gateways (a built-in scanner finds all available gateways). Data for the first entry will already be in;

If the data were changed by another user, they won't be displayed on the screen.

6 Configurations (projects) are uploaded to the Intesis gateway from the Receive/Send tab.

Work in iRidium

Create a new project and add the Intesis Network driver to it from the DEVICES tab.

Setting Driver

Enter the driver connection settings:

Log Level - the level of logging;
Host - IP-address of the gateway;
Port - connection port (by default 3310);
Login / Password - a login and a password to access equipment;
SSL - type of encrypting;
Keep Alive - time to hold connection in miliseconds;
Send Interval (ms) - frequency of sending requests in miliseconds;
Wait Time (ms) - time to wait for an asnwer to a request in miliseconds;
Driver Version - a version of the driver.

Setting Devices

When a driver is added, one Custom device is formed by default with a full list of commands and feedback channels. The device can be renamed and addictional devices can be added, if it is required. Click left mouse button on the added Intesis Network driver and choose Add subdevice to add an additional device.

Click on the device and enter its settings:

Name - the name of a device;
Driver Type - the type of a driver;
Unit ID - device ID in the bus;
Device Type - Custom Unit.

Commands & Feedbacks

All commands and feedback channels have preconfigured settings. If it is required you can change, add or delete a command / a feedback channel.

Command

Command	Input values	Description
On/Off	0 / 1	Turn on / off a device: 0 - turn off, 1 - turn on.
Auto Mode	any value	Switch to the auto mode.
Heat Mode	any value	Switch to a heating.
Dry Mode	any value	Switch to an air-drying mode.
Cool Mode	any value	Switch to a cooling mode.
Fan Mode	any value	Switch to a fan mode.
Mode	0 - 4	Set the mode of an air-conditioner: 0-Auto, 1-Heat, 2-Dry, 3-Fan, 4-Cool.
Temperature Setpoint	Temperature	Set the temperature in degrees Celsius.
Fan Speed	0 - 5	Set the fan speed (0-Auto).
Fan Speed Auto	any value	Switch the fan speed to auto.
Fan Speed (1 - 9)	any value	Set the fan speed.
Vane Vertical Position	0 - 6	Vertical position of the vane: 0-Auto, 1-Swing, 2- Pos1, 3-Pos2, 4-Pos3, 5-Pos4, 6-Pos5.
Vane Vertical Position Auto	any value	Auto mode for the vertical position of the vane.
Vane Vertical Position (1 - 9)	any value	Vertical position of the vane.
Vane Vertical Position Swing	any value	Turn on the Swing mode for vertical vanes.
Vane Horisontal Position	0 - 6	Horizontal position of the vane: 0-Auto, 1-Swing, 2- Pos1, 3-Pos2, 4-Pos3, 5-Pos4, 6-Pos5.
Vane Horisontal Position Auto	any value	Auto mode for the horizontal position of the vane.
Vane Horisontal Position (1 - 9)	any value	Horizontal position of the vane
Vane Horisontal Position Swing	any value	Turn on the Swing mode for horizontal vanes.

Feedbacks

Feedback	Expected values	Description
On/Off	0 / 1	The state of a device: 0 - off, 1 - on.
Auto Mode	0 / 1	The auto mode.
Heat Mode	0 / 1	A mode to heat air.
Dry Mode	0 / 1	A mode to dry air.
Fan Mode	0 / 1	A mode of fan work.
Cool Mode	0 / 1	A mode to cool air.
Mode	0 - 4	A chosen mode of the conditioner: 0-Auto, 1-Heat, 2-Dry, 3-Fan, 4-Cool.
Temperature Setpoint	Temperature	Chosen temperature in degrees Celsius.
Fan Speed	0 - 5	A chosen fan speed: 0-Auto, 1- Low, 2- Low+, 3-Med, 4-Med+, 5-High.
Fan Speed Auto	0 / 1	The auto mode for the fan.
Fan Speed (1 - 9)	0 / 1	A chosen fan speed.
Vane Vertical Position	0 - 6	Vertical position of the vane: 0-Auto, 1-Swing, 2- Pos1, 3-Pos2, 4-Pos3, 5-Pos4, 6-Pos5.
Vane Vertical Position Auto	0 / 1	The Auto mode for vertical vanes.
Vane Vertical Position (1 - 9)	0 / 1	Vertical position of the vane: 2- Pos1, 3-Pos2, 4-Pos3, 5-Pos4, 6-Pos5...
Vane Vertical Position Swing	0 / 1	The Swing mode for vertical vanes.
Vane Horisontal Position	0 - 6	Horizontal position of the vane: 0-Auto, 1-Swing, 2- Pos1, 3-Pos2, 4-Pos3, 5-Pos4, 6-Pos5.
Vane Horisontal Position Auto	0 / 1	The Auto mode for horizontal vanes.
Vane Horisontal Position (1 - 9)	0 / 1	Horizontal position of the vane: 2- Pos1, 3-Pos2, 4-Pos3, 5-Pos4, 6-Pos5...
Vane Horisontal Position Swing	0 / 1	The Swing mode for horizontal vanes.
Ambient Temperature	-35 - 92,5	Surrounding temperature in the room (in degrees Celsius).

Setting Commands and Feedback Channels

To control equipment it is required to set commands (Commands) and feedback channels (Feedbacks). To send a command, drag'n'drop it on a graphic item and enter a value to send. To display a feedback value drag'n'drop a feedback channel on a graphic item and choose how to output a value.

Read more about work with graphic items in the "Types of graphic items" article.