Эта страница является переводом страницы Kramer3000. Перевод выполнен на 100%.

---

iRidium for Kramer 3000

A set of tools to create control interfaces for equipment by Kramer.

The documentation was updated on 23.12.2023

The driver is available from 1.3.60 version

Kramer KIT-400 — a kit which includes the KIT−400T transmitter/switcher and the KIT−400R receiver/scaler of 4K HDMI and VGA signals via HDBaseT twisted pair . The KIT−400T transmitter converts the user−selected input signal into the HDBaseT signal. The KIT−400R receiver receives the HDBaseT signal, converts it to HDMI and up− or down−scales the picture to match the resolution of the HDMI monitor.

Сontroller — an abstract entity according to the Kramer Protocol 3000 documentation. Controller is a collecting device for commands and feedback channels of all Krammer devices that support Protocol 3000 (version 2.10).

Tested with the following equipment:

• KIT-400T - transmitter / switcher;
• KIT−400R - receiver / scaler.

Setting Equipment

To preset the equipment, use the official documentation on the Kramer website.

Work in iRidium

1 Create a new panel and server project.

2 Add Kramer 3000 driver in the Devices tab to a created project.

3 Enter the driver connection settings:

• Protol - TCP;
• Log Level - level of logging;
• Host - IP-address of the equipment;
• Port - UDP connection port (5000 by default);
• Update time - time of requesting the feedback channels in ms. Update time = 5000 by default, the maximum number of connections to the equipment will be 15. If you increase the Update time value, the number of connections will be increased;
• Driver Version - version of the driver.

4 Click left mouse button on the added Kramer 3000 driver and add required subdevices (Add subdevice). Each subdevice has a preset list of commands and feedback channels according to its type.

Setting commands and feedback channels

To control equipment it is required to set Commands and Feedbacks. To send a command, drag'n'drop it on a graphic item and enter a value to send. To display feedback drag'n'drop a feedback channel on a graphic item and choose how to output a value.

Read more about work with graphic items in the "Types of graphic items" article.

KIT-400T

Commands

Parameter	Value	Description
Volume		To set volume level
Mode	Input Output	Mode: input / output
Index	1 ~ 1000	Index / number of the input or output
Value*	-83dB ~ 24dB	Volume value
Mute		To mute
Output	1 ~ 1000	Number of the output where the sound is turned off
Value*	0 / 1	0 - to disable the mute mode 1 - to enable the mute mode
Input Selection		To select the signal source
Layer type	Video Data	Type of the layer or image
Output index	1 ~ 1000	Number of the output to which the image is displayed
Value*	1 ~ 4	Number of the input to switch to
VGA-Phase		To set manually horizontal resolution
Index	1 ~ 1000	Index / number of the input
Value*	1 ~ 31	Horizontal resolution value
Video Mute		To turn on/off video output
Index	1 ~ 1000	Index / number of the input
Value*	0 ~ 2	0 - to turn off video, 1 - to turn on video, 2 - blank image.
Relay		To change the relay state
Index	1 ~ 1000	Index / number of the relay
Value*	0 / 1	Value of the relay state
StandBy		To enable/disable standby mode
Value*	0 / 1	0 - to disable the standby mode, 1 - to enable the standby mode

Value* - укажите при перетягивании команды на графический элемент

Feedbacks

Parameter	Value	Description
Volume		Current volume
Mode	Input Output	Mode: input / output
Index	1 ~ 1000	Index / number of the input or output
Value*	-83dB ~ 24dB	Volume value
Mute		Mute state
Output	1 ~ 1000	Number of the output where the sound is turned off
Value*	0 / 1	0 - the mute mode is off 1 - the mute mode is on
Input Selection		Signal source for output
Layer type	Video Data	Type of the layer or image
Output index	1 ~ 1000	Number of the output to which the image is displayed
Value*	1 ~ 4	Set input number
VGA-Phase		Current setting of the VGA horizontal resolution
Index	1 ~ 1000	Index / number of the input
Value*	1 ~ 31	Horizontal resolution value
Video Mute		To turn on/off video output
Index	1 ~ 1000	Index / number of the input
Value*	0 ~ 2	0 - video is off, 1 - video is on, 2 - blank image.
Relay		The relay state
Index	1 ~ 1000	Index / number of the relay
Value*	0 / 1	Value of the relay state
StandBy		Standby mode
Value*	0 / 1	0 - standby mode is off, 1 - standby mode is on

Value* is a feedback value that can be used for displaying status on graphic items.

Controller

Commands

Parameter	Value	Description
Auto switching mod per outputs		To set the mode of automatic input switching
Layer	Video, Audio, Data, IR, USB	Layer type
Mode	Manual, Priority switch, Last connected switch	Mode of switching
Value*	1 ~ 1500	Number of the output in the system
Auto switching timeout per outputs		To set delay of automatic input switching
Action	Video signal lost, New video signal detected, Audio signal lost, Audio signal detected, No input signals disable 5V on video output, Video cable unplugged, Audio cable unplugged, Video signal lost for signal routed	Action that triggers automatic switching
Value*	Any	Delay time in seconds
IR Learning		To learn IR command
Command ID	0 ~ 9999	Sequence number of the command for flow control / the response command from the device
Command Name	Text	Name of the command
Value*	Any	Any value to activate the action
Send IR command		To send IR command
Port	1 ~ 4	Port of the IR repeater
Command ID	0 ~ 9999	Sequence number of the command for flow control / the response command from the device
Command Name	Text	Name of the command
Repeat	1 ~ 50	Number of times the IR command is sent
Value*	HEX	IR command in the Pronto HEX format (without 0x prefixes)
Lock front panel		To block the sidebar
Value*	0 / 1	1 - to block 0 - to unblock
Power-save mode		To set power saving mode
Value*	0 / 1	1 - to activate 0 - to deactivate
Get preset list		To get a list of saved presets
Value*	Any	Any value to activate the action
Save preset		To save current connections/volume/modes to preset
Value*	Any	Number of preset
Get signal status		To get the status of a specific input signal
Value*	Any	Signal ID
AFV mode		To select audio mod following video
Value*	0 / 1	1 - to set audio-follow-video switching mode 0 - to set audio breakaway switching mode
X-AFV mod		To enable audio mod following video
Direction type	In, Out, Both	Port direction
Port type	HDMI, HDBT, SDI, Analog audio, Amplified audio, MIC, RS232, IR, USB A, USB B	Port type
Port Index	0 ~ 9999	Physical index of the port on the controller
Signal type	Video, Audio, RS232, IR, USB	Signal type
Index	0 ~ 9999	Index of the port in the Kramer system
Value*	0 / 1	1 - to turn on 0 - to turn off
Audio switch		To change relay state
Advanced In	False, True	In = 1 ~ 999 In = Disconnect / Value
In	Disconnect, Value, 1 ~ 999	Disable inputs from the output To send a value from the channel Number of the signal input
Advanced Out	False, True	Out = 1 ~ 999 Out = All / Value
Out	All, Value, 1 ~ 999	To broadcast to all outputs To send a value from the channel Number of the signal output
Value*	Any	Out = Value - number of the signal output Otherwise, it takes any value to activate the command
Audio and video switch		To set audio and video from In to Out
Advanced In	False, True	In = 1 ~ 999 In = Disconnect / Value
In	Disconnect, Value, 1 ~ 999	To disable inputs from the output To send a value from the channel Number of the signal input
Advanced Out	False, True	Out = 1 ~ 999 Out = All / Value
Out	All, Value, 1 ~ 999	To broadcast to all outputs To send a value from the channel Number of the signal output
Value*	Any	Out = Value - number of the signal output Otherwise, it takes any value to activate the command
Video switch		To set video from In to Out
Advanced In	False, True	In = 1 ~ 999 In = Disconnect / Value
In	Disconnect, Value, 1 ~ 999	To disable inputs from the output To send a value from the channel Number of the signal input
Advanced Out	False, True	Out = 1 ~ 999 Out = All / Value
Out	All, Value, 1 ~ 999	To broadcast to all outputs To send a value from the channel Number of the signal output
Value*	Any	Out = Value - number of the signal output Otherwise, it takes any value to activate the command
Volume level		To set volume for the input or output
Stage	Input, Output	The stage at which the sound will be adjusted
Channel	Master, Secondary	Audio channel on which sound adjustment will be made
Mute behavior	False, True	When the volume is changed, the Mute mode turns off. When the volume is changed, the Mute mode doesn't turn off.
Value*	-80dB ~ 10dB	Volume level
Auto switching mod		To turn on the automatic mode of switching inputs / outputs
Mode	Manual, Auto priority, Auto last connected	Operation mode
Value*	1 ~ 999	The output to which the mode will be set
Route		Routing between layers and signal sources
Layer	Video, Audio, Data, IR, USB	Layer on which the source will be located
Advanced destination ID	False, True	Destination ID = 1 ~ 999 Destination ID = Disconnect / All
Destination ID	Disconnect, All, 1 ~ 999	To disable inputs from output To broadcast to all outputs ID of thr end output
Source ID	1 ~ 1500	ID of the source
Value*	Any	It takes any value to activate the command
Standby mode		Power saving mode
Value*	0 / 1	1 - to enable 0 - to disable
Relay state		Controlling the relay state
Relay	1 ~ 10	Number of the relay
Value*	0 / 1	0 - to open 1 - to close

Value* - enter it when drag'n'dropping a command on a graphic item.

Feedbacks

Parameter	Value	Description
Build date		Device manufactured date
Value*	2020/06/15	Year / month / day
Device model		Name of the device
Value*	Text	Name of the device
Serial number		Serial number
Value*	Any	Serial number
Firmware version		Device firmware version
Value*	3.7.57221	Device firmware version
Auto switching mod per outputs		Switching mode for the selected output
Layer	Video, Audio, Data, IR, USB	Image layer in the panel
Output ID	1 ~ 1500	Number of the output in the system
Value*	Manual, Priority switch, Last connected switch	Switching mode
Auto switching timeout per outputs		Delay before signal change for the selected action (switching mode)
Action	Video signal lost, New video signal detected, Audio signal lost, Audio signal detected, No input signals disable 5V on video output, Video cable unplugged, Audio cable unplugged, Video signal lost for signal routed	The action that triggers automatic switching
Value*	Any	Time in seconds
Display status		HPD output status
Output ID	1 ~ 1500	ID of the output
Value*	Signal or sink is not valid, Signal or sink is valid, Sink and EDID is valid	Status
DIP-switch status		To get the DIP-switch status
Switch ID	1 ~ 1500	ID of the switch
Value*	up, down	Status
Learned IR command		Result of the IR Learning command
Value*	Text	Name of the IR Learning command
Lock front panel		Status for work (available for the sidebar)
Value*	0 / 1	1 - blocked 0 - unblocked
Power-save mode		Current power saving mode
Value*	0 / 1	1 - activated 0 - deactivated
Preset list		List of presets
Value*	List	List of presets
Signal status		Status of the signal output
Value*	0 / 1	0 - no signal 1 - signal
Free memory of the file system		Free memory space in the system
Value*	Any	Free space in Kb
AFV mode		Selected mode of audio following video.
Value*	audio-follow-video switching mode, audio breakaway switching	Mode
Volume level		Current volume for the input or output
Stage	Input, Output	The stage at which the sound will be adjusted
Channel	Master, Secondary	Audio channel on which sound adjustment will be made
Value*	-80dB ~ 10dB	Current volume
Auto switching mod		Automatic mode of switching the input/output
Output ID	1 ~ 1500	ID of the output
Value*	manual, auto priority, auto last connected	Mode
Route		Routing between layers and signal sources
Layer	Video, Audio, Data, IR, USB	Layer on which the source will be located
Advanced destination ID	False, True	Destination ID = 1 ~ 1500 Destination ID = Disconnect / All
Destination ID	Disconnect, All, 1 ~ 1500	To disable inputs from the output To broadcast to all outputs ID of the end output
Value*	Any	ID of the layer that is used in routing
Standby mode		Power saving mode
Value*	0 / 1	1 - on, 0 - off
Relay state		State of the relay
Relay	1 ~ 10	Number of the relay
Value*	0 / 1	0 - opened, 1 - closed

Value* is a feedback value that can be used for displaying status on graphic items.