Эта страница является
переводом страницы
LG TV. Перевод выполнен на 100%.
iRidium for LG TV
A set of tools to create interfaces for controlling LG TV-sets.
The documentation was updated on 20.8.2021
Description
iRidium for LG allows to create a control interface for LG TV-sets. The interface looks like a set of buttons and sliders that function like a remote.
LG TV driver consists of a full set of commands that do not require additional setting, and it does not have feedback channels.
The driver works with all LG TV-sets that support WebOS function.
The driver was tested on the following LG TV-set - 49UK6200PLA.
Connection
To connect to LG TV-set it is required to:
1 add LG TV driver to a project LG TV;
2 set the driver (see. "Driver setting");
3 assign driver commands to items of a graphic interface.
The driver is connected to a TV-set via a local network on condition that all settings are correct,
Driver Setting
1 Enter the Devices tab in a created project and add LG TV driver.
2 Enter connection settings of the driver:
- Log Level - the level of logging;
- Host - IP-address of the TV-set;
- Port - device port (by default 9761);
- SSL - a type of encrypting (Disable, TLS v1.2, SSL v2.3, SSL v3.0);
- Pin - the pin-code of a TV-set. To get the pin-code, do the following:
- enter the network settings of a TV-set,
- enter 82888 on the remote,
- turn on Network IP Control,
- the pin-code will be displayed on the screen. It must be entered in the driver settings.
- Mac - MAC address of a device (it depends on the type of connection). To get MAC address, do the following:
- enter the network settings of a TV-set,
- enter 82888 on the remote,
- turn on Network IP Control,
- MAC Address will be displayed on the screen. It must be entered in the driver settings. Choose Wireless for a wireless connection and Wired for a wired one.
Command
A full list of commands is formed when a driver is added to a project. The commands can't be changed, added to, or deleted from the driver. Control is done by means of sending a value to a command (Send number, Send string, send value from object). There are no feedback channels in the driver.
| Command |
Description
|
| 3D |
Turn on / off a 3D mode.
|
| ATV |
Switch to an analogue TV signal.
|
| AV |
Switch to a AV input.
|
| App |
Start the app.
|
| Aspect Ratio |
Open the setting to change the aspect ratio of the screen.
|
| Audio Mode |
Change the audio mode.
|
| Audiodescription |
Turn on audio description of actions on the channel.
|
| Auto Config |
Auto configuration.
|
| Av Mode |
Turn on one of the 3 work-modes set beforehand.
|
| Balance |
Set the sound balance. A value from 0 to 100 is sent to the channel.
|
| Blue Button |
The blue button was pressed.
|
| Energy Saving |
Open the menu to set brightness.
|
| CADTV |
Open CADTV setting menu.
|
| CATV |
Switch to cable TV.
|
| Caption Subtitle |
Turn on subtitles.
|
| Channel Add |
Add a channel.
|
| Channel Delete |
Delete a channel.
|
| Channel Down |
Switch back 1 channel
|
| Channel List |
Open a list of channels.
|
| Channel Up |
Switch forward 1 channel.
|
| Color |
Set the color of the image. A value from 0 to 100 is sent to the channel.
|
| Component |
Switch to a component input.
|
| Contrast |
Set the contrast of the image. A value from 0 to 100 is sent to the channel.
|
| Brightness |
Set the brightness. A value from 0 to 100 is sent to the channel.
|
| DTV |
Switch to digital TV.
|
| Down |
The down arrow is pressed.
|
| Equalizer (1-5) |
Choose a type of equalizer (1-5).
|
| Exit |
Exit any menu, return to the main screen.
|
| Fast Forward |
Fast forward.
|
| Favorite Channel |
Switch to a chosen channel.
|
| Green Button |
The green button was pressed.
|
| HDMI (1-3) |
Switch to HDMI input (1-3).
|
| Input switch |
Change the input source (sources are switched one after another).
|
| Left |
The left arrow was pressed.
|
| Live Tv |
Fast switch to TV.
|
| Mute/Unmute |
Mute / unmute.
|
| My App |
Open/close the app menu.
|
| Number (0-9) |
Enter a numeral (0-9)
|
| Ok |
Ok button is pressed.
|
| Play |
Start recording.
|
| Power Off |
Turn off the TV-set.
|
| Power On (WakeOnLAN) |
Turn off the TV-set in the local network via WakeOnLan.
|
| Previous Channel |
Switch to a previous channel.
|
| Program Guide |
Open a teleguide.
|
| Program Info |
Info about the program.
|
| Program Order |
A list of channels.
|
| Quick Menu |
Open/close the setting menu.
|
| Record |
Turn on / off recording.
|
| Red Button |
The red button was pressed.
|
| Return (back) |
Return 1 step in the setting menu.
|
| Rewind |
Rewind.
|
| Right |
The right arrow was pressed.
|
| Setting Menu |
Open/close the setting menu.
|
| Sharpness |
Set the clarity of the image. A value from 0 to 50 is sent to the channel.
|
| Simple Link |
Turn on / off the Simple Link function.
|
| Sleep Reserve |
Open timer settings and choose a required time when the button is pressed again.
|
| Slow Play |
Slow play.
|
| Smart Home |
Open/close the app menu.
|
| Soccer Screen |
Turn on / off a "sport" mode.
|
| Teletext Option |
Change the settings of the teletext (only for Great Britain and Ireland).
|
| Teletext |
Turn on the teletext function (only for Great Britain and Ireland).
|
| Tint |
Set the tint of the image. A value from 0 to 100 is sent to the channel.
|
| Up |
The up arrow is pressed.
|
| User Guide |
Open the user manual.
|
| Video Mode |
Change the video mode.
|
| Volume Control |
Change the level of volume. A value from 0 to 100 is sent to the channel.
|
| Volume Down |
Decrease the volume by 1.
|
| Volume Up |
Increase the volume by 1.
|
| Yellow Button |
The yellow button was pressed.
|
Setting Commands and Feedback Channels
To control equipment set Commands. To set a command drag'n'drop a command on a graphic item and enter a Value that must be sent.
Read more about work with graphic items in the
"Types of graphic items" article.
