Эта страница является переводом страницы Lite HDL interface. Перевод выполнен на 100%.

---

HDL interface module for iRidium lite.

Module developed in iRidium lite to control equipment in HDL Buspro bus.

documentation was last updated on 13.8.2020

Description

i3 lite for HDL Buspro is a simple tool that allow to create an interface to control a house or an office based on HDL equipment.

HDL interface module has everything that is required for easy and convenient work with HDL equipment.

You can see a full list of devices in the List of devices.

Installation of Module

1 Зenter the config.

2 Enter iRidium store, "Devices" tab.

3 Choose HDL interface module and press the "Add" button.

4 Enter the Host and Port of the HDL bus and press "Add".

Now "HDL interface is in the device list".

Adding HDL Devices

HDL devices can be added to the module with the help of:

• HDL scanner,
• manual data entry.

Method 1

The easiest way is to add devices with the help of a scanner.

The scanner will find HDL devices, choose required ones and press "Add devices".

Method 2

When devices are added manually, settings and additional parameters of devices are be set by you.

To do it, choose a required device in the list and enter its settings. You can see a list of devices and their detailed description in List of devices.

List of Devices

Name of device	Type of device	Description
Curtain	Curtain	Module allows to control Curtain devices in the HDL Buspro bus. The widget allows ro open, close and stop blinds at a required moment. A set of actions, events and conditions allows to use all functions of the module in macros and scenes.
Dimmer	Dimmer	Module allows to control Dimmer devices in the HDL Buspro bus. Turn on/off and brightness control are available. A set of actions, events and conditions allows to use all functions of the module in macros and scenes.
DMX Scane Controller	Dimmer, CCT, RGB, RGBW.	Module allows to control DMX devices in the HDL Buspro bus. 4 types of light devices are available: dimmer (1 channel), CCT (2 channels), RGB (3 channels) and RGBW (4 channels). Each type of light devices has its own widget.
GPRS	SMS sender	Module allows to control GPRS devices in the HDL Buspro bus RS. A set of actions allows to send SMS in macros and scenes.
Homeplay IP	Audio players	Homeplay IP-module is a solution that allows to control a device via UDP protocol. It support FM-radio, FTP and SD audio streams.
HDL-MHRCU.433	Relay, Dimmer, Input.	The module is developed for HDL-MHRCU.433 device. It's a hotel controller, that is the core of the system; a mixed controller: a call function, 24 dry contact channels and LED outputs. It supports 48 channels and enables control of the door bell, blinds, light, fan and power.
HDL-MHIOU.432	Curtain, Dimmer, Input, Relay.	The module is developed to control HDL-MHIOU.432 device. It's a mixed hotel I/O module. Its functions include dimming, relays, control of blinds, dry contact and 3 functional LEDs.
Logic	UV Switch	Module allows to control logic blocks of HDL devices in the HDL Buspro bus. A set of actions allows to change the value of a logic block in macros and scenes.
Power meter	Power meter	Module of devices to display measured rms voltage, current rms value, active power, power factor, active energy and frequency. It supports 4 zones. A set of events and conditions allow to use all functions of the module in macros and scenes.
Remote control	Remote Server	The "HDL Remote Server" mode allows connect to the HDL IP module via the Internet if you do not have a static IP-address or domain (DDNS). The connection is established via the HDL Internet server which is used for authorization between iRidium control panel and HDL IP interface. After the authorization the connection is direct without using the server.
Relay	Relay	Module allows to control relay devices in the HDL Buspro bus. It's a trigger that can turn on / off something when it is pressed, and there is an indicator of feedback. A set of actions, events, conditions allows to use all functions of the module in macros and scenes.
Scene Control	Scenes	Module allows to control scenes for devices in the HDL Buspro bus. i3 lite allows to launch a scene in macros and scenes (subprograms).
Security	Security control	Module allows to control security devices in the HDL Buspro bus. Notification about an alarm and putting the system on guard are available. A set of actions, events, conditions allow to use all functions of the module in macros and scenes.
Sensor Input Temperature	Temperature sensor	Module to display temperature data from sensors in the HDL Buspro bus. A set of events and conditions allow to use all functions of the module in macros and scenes.
Sensor Input 4Z	Input	Module allows to display data from all 4 sensors of the Sensor Input 4Z device in the HDL Buspro bus. A set of events and conditions allow to use all functions of the module in macros and scenes.
Sensor Input 24Z	Input	Module allows to display data from all 24 sensors of the Sensor Input 24Z device in the HDL Buspro bus. A set of events and conditions allows to use all functions of the module in macros and scenes.
Sensor in One	Motion detector, Contact, Luminosity sensor, Temperature sensor, Gas sensor, Air quality sensor.	Module allows to display Sensor in One device in the HDL Buspro bus. The module displays values from 7 sensors: air, motion, 2 dry contact sensors, gas, luminosity and temperature. A set of events and conditions allow to use all functions of the module in macros and scenes.
Sensor 8 in 1	Light detector, Motion detector, Contact, Luminosity sensor, Temperature sensor.	Module allows to display Sensor 8 in 1 devices in the HDL Buspro bus. The module displays values from 4 sensors: light sensor, 2 dry contact sensors and a motion sensor. A set of events and conditions allow to use all functions of the module in macros and scenes.
Sensor 12 in 1	Motion detector, Contact, Luminosity sensor, Temperature sensor, Relay.	Module allows to display Sensor 12 in 1 devices in the HDL Buspro bus. The module displays value from 4 sensors: sound sensor, motion sensor, 2 dry contact sensors, luminosity and temperature sensors. Sets of events and conditions allow to use all functions of the module in macros and scenes.
UV Switch	UV Switch	Module allows to control univerral switches (UV-switches) of HDL-devices in the HDL Buspro bus. You can set the value of a UV-switch in macros and scenes.
Z-Audio	Audio players	Z-Audio module is a complete sound solution. It supports FM-radio, FTP and SD audio streams. The module supports all HDL Z-Audio devices.

Device Properties

Curtain

Parameter	'Admissible values	Description
Name	Any text	Device name for identification.
Channel count	1 - 255	Number of added devices.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.

Dimmer

'Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Channel count	1 - 255	Number of added devices.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency of updating data from the device.

DMX Scane Controller

Parameter	Admissible values	Description
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.
Scene Area	Numbers are written with a comma, a hyphen or a combination of these two ways. Values are entered without spaces. Example: "1,3,5-7"	A group of addresses of a device.
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency of updating data from the device.

After entering settings choose a type of lighting.

Fill in additional settings for each type.

Dimmer

Parameter	Admissible values	Description
Name	Any text	Device name for identification
Channel	0 - 255	Number of the channel.

CCT

Parameter	Admissble values	Description
Name	Any text	Device name for identification.
Brightness ch.	0 - 255	Number of the light brightness channel.
Warmth ch.	0 - 255	Number of the light warmth channel.

RGB

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Red ch.	0 - 255	Number of channel for red color.
Green ch.	0 - 255	Number of channel for green color.
Blue ch.	0 - 255	Number of channel for blue color.

RGBW

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Red ch.	0 - 255	Number of channel for red color.
Green ch.	0 - 255	Number of channel for green color.
Blue ch.	0 - 255	Number of channel for blue color.
White ch.	0 - 255	Number of channel for white color.

GPRS

Parameter	Admissible values	Description
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.

Open the settings window to create a message.

Write the channel number to send the message and press "Add".

Homeplay IP

Parameter	Admissible values	Description
Host	Number in "0.0.0.0" format	IP-address of the device.
Port	Any number	Port via which equipment works.

HDL-MHRCU.433

Parameter	Admissible values	Description
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.

HDL-MHIOU.432

Parameter	Admissible values	Description
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.

Logic

Parameter	Admissible values	Description
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.

Enter the module settings to add a widget:

Enter the name and the number of logic block and press "Done".

Power meter

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the sudnet where the device is located.
Device ID	0 - 255	ID of HDL device.
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency of updating data from the device.

Remote control

Possibility to change connection parameters is required if you leave the Wi-Fi network of the object and start using 3G or another Wi-Fi network. To continue controlling a project, a switch is required from a local to a public IP-address of the internet router.

The switch does not happen automatically, you have to press a button to select a connection mode. For remote control of the system, ports to control the automation system must be made public. To do it Port Forwarding is set on the internet router, Protected connection can be provided by VPN.

You can find addressed of available remote HDL servers in the HDL Tool in the window for bus scanning after you switch a way to connect to the bus to Server.

HDL IP interface with firmware not earlier than HDL_V04.06U
access to the bus via Internet works via one licensed HDL IP interface (connection to several HDL IP interfaces via the Internet at the same time is not supported)

Enter Connection Preferences in the setting of HDL IP module: parameters of clients that must have connection to the HDL IP module.

• Type: Remote Server.
• Project Name, Group Name: name of a project or of a group of projects.
• User, Password: parameter of secure connection.
• Preferred Server, Port: parameter of secure connection to HDL server.

Enter connection parameters to the HDL IP module via a remote server in the module settings. You can find the address of the remote HDL server in HDL Tool, in the window for scanning the bus after you switch to connection to the bus via the Server.

Parameters of Module Setting:

Parameters	Admissible values	Description
Name	Any text	Device name for identification.
Host	Хост в формате: “0.0.0.0”	Address of remote HDL server. You can find addresses of available remote HDL servers in HDL Tool, in the window for bus scanning after you switch the connection method to the bus to the Server
Port	Any number	Port to connect to IP module via a remote server (like in the settings of IP module).
Login	Any text	Connection login from the settings of the IP module.
Password	Any text	Connection password from the settings of the IP module.
External Port	Any number	Access port to HDL IP interface.
Project Name	Any text	Project name from the settings of the IP module
Group Name	Any text	Name of a group from the settings of the IP module.

Sometimes it is required to forward the 6000 port (External Port) using the instruction to connect via a remote server to HDL IP interface.

Relay

Parameter	'Admissible values	Description
Name	Any text	Device name for identification.
Channel range	0 - 255	Devices from which to which channel must be added to the project.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.
Widget type	Relay, Button.	Type of widget: trigger, button.
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.

Scene Control

Parameter	Admissible values	Description
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device.

Add a widget with "+" and enter its name:

Enter the widget settings and add a new scene with the help of "Add new":

Enter required device parameters and press "Done".

Parameter	Admissble values	Description
Name	Any text	Device name for identification.
Area	1 - 255	Number of the area for which the scene is set.
Scene	0 - 255	Number of the scene

Security

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.

Sensor Input Temperature

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.

Sensor Input 4Z

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.
Firmware ver	New, Old.	Version of equipment firmware.

Sensor Input 24Z

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.
Firmware ver	New, Old.	Version of equipment firmware.

Sensor in One

Sensor type || Air,
Humidity || Type of sensor: air, humidity.

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device
HDL-MSOUT.4W	No, Yes.	Microwave sensor.
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.

Sensor 8 in 1

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.
Temperature shift	No shift, for microwave sensor (-20)	Shift of temperature: without shift, microwave sensor (-20).

Sensor 12 in 1

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.

UV Switch

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device

Enter the module settings and enter the name and the number of the universal switch, press "Done" to add the widget to the project.

Z-Audio

Parameter	Admissible values	Description
Name	Any text	Device name for identification.
Subnet ID	0 - 255	ID of the subnet where the device is located.
Device ID	0 - 255	ID of HDL device
Refresh rate	Only on start, 3sec, 5sec, 10sec, 30sec	Frequency to update data from the device.
Source command	For old model, For new model, For MZBOX-A50B	Selection of equipment model.