Эта страница является
переводом страницы
Pro System menu. Перевод выполнен на 100%.
System menu
System menu is a system section of the app that has functions for more detailed settings of the app and project work.
How to find the system menu
Each i3 pro app has a system menu. To call the system menu on Windows platform, press F8. To call the menu on iOS and Android-based devices swipe from the left to the center.
You can see a list of prjects in the cloud
Description of windows and settings
Main window
The main window consists of the following components
1 User name and a button to leave the account. In this window you can turn on "Developer's panel".
2 Button to open the main window of the system menu
3 Name of the opened window and a button to go to the list of projects available for this account.
4 Opening QR-code scanner for fast downloading projects on the panel.
5 App version
Drivers
This window contains a list of drivers used in the project. When a driver is selected, its network settings are opened. The settings can be changed.
Attention! New driver settings, made in the system menu, work until the app is restarted.
Password
This window contains 4 levels of project passwords. Each level can be changed.
GUI Scale
Setting of interface scaling
- None - turn off scaling
- Proportional - proportional scaling of the interface
- Full size - scaling of interface to full screen
App window
Setting the app window (available only for Windows). In this window you can set
- Show - Mode of the app display. The app can be launched as a window to full screen in the set coordinates.
- Always on top - Display of the app always on top of other windows
- Without frame - Display of the app without the window-frame
- Show cursor - Show mouse cursor in the app
- Change orientation - parameter for orientation (landscape, portrait) of the client at startup. The setting allows you to change the orientation of the client to display projects with vertical orientation correctly (settings are activated after restarting the client).
Remote Debug
This window contains settings for remote app bebugging
You can activate the mode of remote debugging in i3 pro app. In this mode IR.Log() messages go to a remote PC. To do it, download and install this program syslog and launch it on the PC. Then set parameters for remote debugging.
- Enable - Turn on/off remote debugging.
- Syslog host - ip address of the PC where Syslog is launched
- Syslog port - port indicated in the Syslog program
- Log level - The level of messages that go to a remote PC
Updating project
In this window you can activate automatic updating of the project from the cloud. If the option is activated, the app will check updates in the cloud automatically when starting the app as well as once a day (you can see the exact time of updating in My account)
- Auto-update of current project - to activate automatic updating
- Update date - date of the last update of the current project
- Update time - last update time of the current project
If the script which activates automatic updating is added to the project when updating and the Auto update option is deactivated on the panel, then the Auto update option will be activated in the app when this update is downloaded.
Local update
Settings of local project update. If iRidium Transfer does not find a control panel automatically because of the settings of broadcast requests on the router, you can set manual project update from the transfer. To do it, launch iRidium Transfer on a remote PC and set the following parameters
- Enable - Turn on the mode of local update
- Host - ip address of the PC where iRidium transfer is launched
- Port - Update port indicated on a remote PC
- Pin - Security pin code for update, set in iRidium transfer
- Update Now - Button to update a project from iRidium transfer
Render
Menu to change the graphic engine (drawing mode). If th einterface is displayed incorrectly, change the graphic engine.
- OGL - Open GL
- DX9 - DirectX 9
- DX10 - DirectX 10
- DX11 - DirectX 11
Screen
Menu to set system functions
- Disable auto-lock - Turn on/off sleeping of the control panel
- Disable NPot Textures - Turning on/off NPot textures. Interface display of some devices may work slowly due to the usage of NPot textures. If you notice that drawing a project slows down, try turning off this setting to increase drawing power.
- List move distance(px) - Adusting the screen response. If the screen of your device is too responsive, when a list is scrolled, list items can be accidently pressed. When you adjust the response, accident presses can be avoided.
- Show FPS - Show the number of frames per second (fps) on the screen
- "No Licence" message - Turn on/off notification about license absence.
- Enable mouse - Turn on/off control with a mouse
- Enable Touch - Turn on/off control from a touch screen
- Enable RTL fonts - Turn on/off text display from right to left
- Enable fonts hinting - smoothing the font outline when it is rasterized with the help of special software instructions in the font file. It is “On” by default to provide font display. If it is turned off, the fonts are displayed in a project the way they look in the studio without smoothing.
- Enable navigation bar (only Android) - displaying the system navigation buttons. On - the navigation buttons are always displayed, off - the navigation buttons are hidden.
Sound
Settings to play audio files
- Volume - adjusting the volume level
- Mute - Turn on/off the sound
- Playmode (only for iOS), when working in a project, audio playback from other applications will be disabled.
Menu disabling
Settings to display the system menu
- System menu - Turn on/off display of system menu
- Project menu - Turn on/off diplay of a menu with projects
Info
This section contains system information about the app.
- App version - App version
- Project menu version - Version of the system menu and the menu with projects
- Welcome version - Version of authorization menu
- HWID - panel ID
- Allocated memory - Memory that can be used by the app.
Home Indicator
Starting with iPhone Х there appeared an item, replacing "Home" button. It looks like a stripe at the bottom of the screen and it is always seen in all apps. Swipe on it returns to the main screen or opens a multitask.
"Home Indicator" parameter allows to control the display of this item in projects. It has two states that determine its display.
Cloud receive time out
In this section you can set up time for waiting response from the cloud. The time is set up in milliseconds. It is - 30 seconds (30000 ms) by default.
After this time the client will try to synchronize with the cloud one more time. If it fails, the error message will appear in the log.
System menu for an end-user
System menu for an end-user includes the following list of setting parameters:
To get access to other parameters of the project settings select the Project settings menu and enter the access password:
