Эта страница является переводом страницы SIP Dahua. Перевод выполнен на 100%.

Содержание

1 Setting Dahua SIP Video Intercom to Work with iRidium

Setting Dahua SIP Video Intercom to Work with iRidium

Tested Devices

Model	Description	Appearance
Dahua VTO1210C-X	outside videophone panel
Dahua VTO2111D-WP(433)	outside videophone panel

Setting Dahua Videophone Panels

Settings can be slightly different depending on the model and the firmware of videophones.

General Settings

1 Go to the web-interfaсe of the videophone panel and enter the login and password (by default they are admin and admin).

2 Enter TCP/IP interface as the working interface in the Local Config > A & C Manager tab.

3 Set IP addresses of the videophone panel as it is required for the network of your SIP system.

4 Set parameters to control opening the door.

Unlock Responding Interval: minimal interval between door openings (in seconds),
Unlock Period: time to unlock the lock (in seconds),
Open Door First Command: combination opening the lock (the last symbol in this combination must be "#").

5 Set parameters of the video stream.

6 Set sound parameters.

Setting Built-in SIP server

Videophone panels by Dahua have a built-in SIP-server. You can built a simple SIP-structure using this sever without additional devices or software. You can also use: external SIP server.

1 Set Network Config > SIP Server Config to deafult settings (Default button).

2 Activate built-in SIP server

3 Reset the device.

4 Set connection of the videophone panel to the built-in SIP server (when the built-in server is activated a panel always gets 8001 number).

If connection is successful, Online status is displayed on the display of VTO1210C-X videophone.

5 Set connection of subscribers to the SIP server.

Setting External SIP server

1 The built-in SIP server must be turned off. Set access parameters to the external SIP server:

2 Reset the device.

3 The number of a panel can be changed in LAN Config tab.

4 Reset the device again.

Working in iRidium studio

1 Create a panel project.
2 Add SIP driver and set it.

The most important settings are marked with red.

Host - the IP address of the call panel (default is 192.168.1.5).
Port - the port of the call panel (according to the SIP standard, always "5060")
SIP ID - username of the SIP account activated in step 7 of this manual
Password - password of the SIP account activated in step 7 of this manual
Use SIP TONE - true, generate SIP messages of tone dial
Use DTMF Tone - false, do not generate regular messages of tone dial
Codec PCMU - true, activation of G.711μ audio codec
Codec PCMA - true, activation of G.711a audio codeс
Codec H264 - true, activation of G.711μ audio codec

Deactivate other codeсs (false)

3 Add graphiсal items to the project and set them.

4 Add the following script to the project:

outdoor_station_number = "0101010100"; // topological code of IPerVoice panel
var SIP = IR.GetDevice("SIP");   // name of SIP driver
var action = "CALL";             // default action
ButtonAction = IR.GetItem("Page 1").GetItem("Button_action");
LabelName = IR.GetItem("Page 1").GetItem("Label_name");
LabelNumber = IR.GetItem("Page 1").GetItem("Label_number");
SwitchVideo = IR.GetItem("Page 1").GetItem("Switch_video");
 
IR.AddListener(IR.EVENT_START,0,function()
{
  // display the SIP video
  IR.GetItem("Page 1").GetItem("Video").GetState(0).Image = "sip_image://";
});
 
IR.AddListener(IR.EVENT_TAG_CHANGE, SIP, function(name, value) {
  if (name == "STATUS") {
    var flagReady = (value == "On Hook..." || value == "Incoming Call...");
    ButtonAction.Enable = flagReady;
    var flagTalk = (value == "Talking...");   
    IR.GetItem("Page 1").GetItem("Button_door").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button1").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button2").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button3").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button4").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button5").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button6").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button7").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button8").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button9").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button0").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button_asterisk").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button_octothorp").Enable = flagTalk; 
    var flagConnect = (value == "Dialing..." || value == "Trying..." || value == "Ringing..." || value == "Talking..."
    || value == "Not Found..." || value == "Not Acceptable..." || value == "Not Available..." || value == "Service Unavailable...");
    IR.GetItem("Page 1").GetItem("Button_cancel").Enable = flagConnect;
    SwitchVideo.Enable = !flagConnect;
    if (value == "Incoming Call...") {
      action = "ANSWER";
      LabelName.Text = SIP.GetFeedback("INCOMING CALL NAME");
      LabelNumber.Text = SIP.GetFeedback("INCOMING CALL NUMBER");
    }
    if (value != "Incoming Call..." && value != "Talking...") {        
      action = "CALL";
      LabelName.Text = "---";
      LabelNumber.Text = outdoor_station_number;   
    }   
    var flagShow = (flagReady || flagConnect || flagTalk);
    LabelName.Visible = flagShow;
    LabelNumber.Visible = flagShow;             
  }		
});
 
function Talk() {
  SIP.SetFeedback("NUMBER", outdoor_station_number); // when calling number is required         
  SIP.Set(action, SwitchVideo.Value);                // call or answer, audio or audio+video
}

5 Set the graphical item to interact with the SIP driver and the script.

Setting a button to open the door

When a button on a call panel is pressed, a call begins. To open the door, a digital code must be sent, it can be set in the settings of the call panel (default code - “*50”)
1 Create a new script.
2 Add the following to it:

function SIPsendtone1(){
    var SIPdevice1=IR.GetDevice("SIP");
    SIPdevice1.Set("SEND TONE", 10); // отправка “*”
    SIPdevice1.Set("SEND TONE", 5);// отправка “5”
    SIPdevice1.Set("SEND TONE", 0);// отправка “0”
}

3 Creatre a button and assign the call of this script to it .

Demo project

Download the demo project

The panel project contains:

a display where video from the panel camera is displayed in real time,
a keyboard to enter numbers,
call/answer button,
cancel button,
button to open the door,
displaying the current status,
displaying information about the subscriber (name, number),
setting the volume of the speaker and the mic of i3 pro panel.