Эта страница является переводом страницы SIP Fanvil. Перевод выполнен на 100%.

Содержание

1 Setting Fanvil SIP Video Intercom to Work with iRidium

Setting Fanvil SIP Video Intercom to Work with iRidium

In this review, we give an overview of Fanvil intercoms. Fanvil company offers a wide range of devices with different capabilities. Used equipment: SIP server 3CX, iRidium SIP client on iPhone 7. 2N Helios SIP panel was used to compare sound quality. Version of i3 pro: 1.3.26.0.24027.

Tested Devices

Model	Description	Appearance
i31S	outdoor SIP video intercom
i16V	outdoor SIP video intercom
i32V	outdoor SIP video intercom
i12N-01p	outdoor SIP audio intercom
i33V	outdoor SIP video intercom
i10	internal SIP audio intercom
i20S	internal SIP audio intercom

Setting Fanvil Videophone Panels

Settings of videophone panels may vary depending on the model and the version of firmware.

i31S Model

This model has a built-in speaker, microphone, front camera with infrared lighting and night vision mode. The 2 megapixel camera provides sufficient video quality enough to identify visitors. The video is transmitted in 720p quality using the H264 codec.

G722 audio codec is used for audio transmission. The intercom has no built-in echo cancellation, this model supports only noise cancelling. Compared to 2N, the sound quality is worse. In open areas you will hear the interlocutor quite well. Some noises can be heard during conversation.

You will hear the interlocutor clearly, but quietly. When you increase the sensitivity of the microphone, you might have some ambient noises.

Video comparing the loudspeakers and the micropone of a panel to those of iPad Air 2 and iPad Pro:

Panel setting (firmware version is 2.6.1.6726):

1 Go to the web-interfaсe of the videophone panel and enter the login and password (by default they are admin and admin).

2 Set IP addresses of the videophone panel as it is required for the network of your SIP system.

3 Select audio codecs (G722 was tested).

4 Set up volume:

Speakerphone Volume - volume of a loudspeaker;
Speakerphone Ring Volume - ringer volume;
Broadcast Output Volume - microphone sensitivity.

5 Set access parameters to external SIP server:

SIP client data to connect to the server:

Phone number - user name;
Display name - name displayed when calling;
Authentication Name - user name used to register on the SIP server;
Authentication Password - user password used to register on the server;
Activate - enable / disable SIP profile.

Server data:

SIP Proxy Server Address - server IP address;
SIP Proxy Server Port - port.

6 Set parameters of DTMF tones:

DTMF Type
DTMF SIP INFO Mode - a type of processing * (asterisk) and # (hash) buttons.

Click the Apply button. If connection to the SIP server is successful, Registered status of the account is displayed.

7 In addition to number dialing, this model supports call from a button. To call from the keyboard, you need to dial: asterisk (*), subscriber's number, asterisk (*).

Set a call to a subscriber with the help of a button:

Hot Key - a subscriber that set beforehand is called (panel with i3Pro client);
Value 1 - the main number;
Value 2 - a reserve number;
Line - a SIP line.

8 Set up a key for DTMF tones:

Calling Password - key for activating the relay via the iRidium SIP client.

i16V Model

This model has a built-in speaker, microphone, front camera with infrared lighting and night vision mode. The 2 megapixel camera provides sufficient video quality enough to identify visitors. The video is transmitted in 720p quality using the H264 codec.

G722 audio codec is used for audio transmission. The intercom has no built-in echo cancellation, this model supports only noise cancelling. Compared to 2N, the sound quality is worse. In open areas it will be difficult for the user to make out the speech of the interlocutor. The sound is not clear, noise is heard.

With iRidium SIP panel, the interlocutor can be heard quite clearly, sometimes the connection is interrupted. Some noises can be heard during conversation, the sound is clear and loud. The user's speech is clear at short and medium distances up to 50cm.

Video comparing the loudspeakers and the microphone of a panel to those of iPad Air 2 and iPad Pro:

Panel setting (firmware version is 2.6.0.6680):

1 Go to the web-interfaсe of the videophone panel and enter the login and password (by default they are admin and admin).

2 Set IP addresses of the videophone panel as it is required for the network of your SIP system.

3 Select audio codecs (G722 was tested).

4 Set up volume:

Speakerphone Volume - volume of a loudspeaker;
Speakerphone Ring Volume - ringer volume;
Broadcast Output Volume - microphone sensitivity.

5 Set access parameters to external SIP server:

SIP client data to connect to the server:

Phone number - user name;
Display name - name displayed when calling;
Authentication Name - user name used to register on the SIP server;
Authentication Password - user password used to register on the server;
Activate - enable / disable SIP profile.

Server data:

SIP Proxy Server Address - server IP address;
SIP Proxy Server Port - port.

6 Set parameters of DTMF tones:

DTMF Type
DTMF SIP INFO Mode - a type of processing * (asterisk) and # (hash) buttons.

Нажмите кнопку Apply. При успешном подключении к SIP-серверу должен отобразиться статус аккаунта Registered.

7 Set a call to a subscriber with the help of a button:

Hot Key - a subscriber that set beforehand is called (panel with i3Pro client);
Value 1 - the main number;
Value 2 - a reserve number;
Line - a SIP line (setting in step 5).

8 Set up a key for DTMF:

Trigger Code - key for activating the relay via the iRidium SIP client
Reset Code - code to reset Trigger Code.

i32V Model

This model has a built-in speaker, microphone, front camera with infrared lighting and night vision mode. The 2 megapixel camera provides sufficient video quality enough to identify visitors. The video is transmitted in 720p quality using the H264 codec.

G722 audio codec is used for audio transmission. The intercom has no built-in echo cancellation, this model supports only noise cancelling. Compared to 2N, the sound quality is worse. In open areas it will be difficult for the user to make out the speech of the interlocutor. The sound is not clear, noise is heard. The speech is quite loud.

The interlocutor hears the user loudly, but some noises can be heard during conversation. When you move away from the device at medium distances, the sound will become much quieter, sometimes interruptions can be noticed.

Video comparing the loudspeakers and the microphone of a panel to those of iPad Air 2 and iPad Pro:

Panel setting (firmware version is 22.4.0.6522):

1 Go to the web-interfaсe of the videophone panel and enter the login and password (by default they are admin and admin).

2 Set IP addresses of the videophone panel as it is required for the network of your SIP system.

3 Select audio codecs (G722 was tested).

4 Set the volume:

Speakerphone Volume - the volume of a loudspeaker;
MIC Input Volume - microphone sensitivity.

5 Set access parameters to external SIP server:

SIP client data to connect to the server:

Phone number - user name;
Display name - name displayed when calling;
Authentication Name - user name used to register on the SIP server;
Authentication Password - user password used to register on the server;
Activate - enable / disable SIP profile.

Server data:

SIP Proxy Server Address - server IP address;
SIP Proxy Server Port - port.

Click the Apply button. If connection to the SIP server is successful, Registered status of the account is displayed.

6 Set a call to a subscriber with the help of a button:

Hot Key - a subscriber that set beforehand is called (panel with i3Pro client);
Value 1 - the main number;
Value 2 - a reserve number.

7 Set up a key for DTMF:

Calling Password - a key to activate a relay.

8 Set up video display parameters:

Encode Format - selecting a codec;
Resolution - image resolution;
Frame Rate - frame frequency.

i12N-01p Model

This model has a built-in speaker and microphone. G722 audio codec is used for audio transmission. The intercom has no built-in echo cancellation, this model supports only noise cancelling. Compared to 2N, the sound quality is worse. Ambient noises are always heard. The panel works only when noise cancelling is off. An echo is heard.

With iRidium SIP panel the user does not hear the interlocutor. Mainly ambient noises are heard. The speech is heard quietly. When background noise is present, it is quite difficult to understand the speech.

Video comparing the loudspeakers and the microphone of a panel to those of iPad Air 2 and iPad Pro:

Panel setting (firmware version is 2.1.1.2527):

1 Go to the web-interfaсe of the videophone panel and enter the login and password (by default they are admin and admin).

2 Set IP addresses of the videophone panel as it is required for the network of your SIP system.

3 Select audio codecs and set up volume (G722 codec was tested):

Audio Settings - audio codes settings;
SPK Output Volume - volume of a loudspeaker;
MIC Input Volume - microphone sensitivity.

4 Set access parameters to external SIP server:

Server data:

SIP Address - server IP address;
SIP Port - port.

SIP client data to connect to the server:

Authentication User - user name used to register on the SIP server;
Authentication Password - user password used to register on the server;
SIP User - user name;
Display name - name displayed when calling;
Enable Registration - enable / disable SIP profile.

5 Set parameters of DTMF:

DTMF Type
DTMF SIP INFO Mode - a type of processing * (asterisk) and # (hash) buttons.

Click the Apply button. If connection to the SIP server is successful,Registered status of the account is displayed.

6 Set a call to a subscriber with the help of a button:

Hot Key - a subscriber that set beforehand is called (panel with i3Pro client);
Value 1 - the main number;
Value 2 - a reserve number;
Line - a SIP line.

7 Set up a key for DTMF tones:

Remote DTMF Trigger - key for activating the relay via the iRidium SIP client.

i33V Model

This model has a built-in speaker, microphone, front camera with infrared lighting and night vision mode. The 2 megapixel camera provides sufficient video quality enough to identify visitors. The video is transmitted in 720p quality using the H264 codec.

G722 audio codec is used for audio transmission. The intercom has no built-in echo cancellation, this model supports only noise cancelling. Compared to 2N, the sound quality is worse. In open areas it will be difficult for the user to make out the speech of the interlocutor. The sound is not clear, noise is heard. The speech is quiet. The panel works only when noise cancelling is off.

With iRidium SIP panel the interlocutor can be heard quite clearly, sometimes the connection is interrupted.

Video comparing the loudspeakers and the microphone of a panel to those of iPad Air 2 and iPad Pro:

Panel setting (firmware version is 2.4.0.6483):

1 Go to the web-interfaсe of the videophone panel and enter the login and password (by default they are admin and admin).

2 Set IP addresses of the videophone panel as it is required for the network of your SIP system.

3 Select audio codecs (G722 was tested).

4 Set access parameters to external SIP server:

SIP client data to connect to the server:

Phone number - user name;
Display name - name displayed when calling;
Authentication Name - user name used to register on the SIP server;
Authentication Password - user password used to register on the server;
Activate - enable / disable SIP profile.

Server data:

SIP Proxy Server Address - server IP address;
SIP Proxy Server Port - port.

5 Set parameters of DTMF:

DTMF Type
DTMF SIP INFO Mode - a type of processing * (asterisk) and # (hash) buttons.

Click the Apply button. If connection to the SIP server is successful, Registered status of the account is displayed.

To call a subscriber dial the number on the numeric keyboard.

6 Set DTMF tones:

Remote Password - a password to activate the relay with iRidium SIP client;
Local Password - a password to activate the relay from the keyboards of the intercom.

7 Set up video display parameters:

Encode Format - selecting a codec;
Resolution - image resolution;
Frame Rate - frame frequency.

To call from the keyboard, you need to dial: call button (C), subscriber's number, call button (C).

i10 Model

This model has a built-in speaker and microphone. G722 audio codec is used for audio transmission. The intercom has no built-in echo cancellation, this model supports only noise cancelling. Compared to 2N, the sound quality is the same. As the model does not support echo cancellation, in open areas you will hear the interlocutor well. The sound is clear, but sometimes it is interruped. The sound was checked from a distance of about 30 cm.

With iRidium SIP panel, the interlocutor's speech is loud and clear, sometimes the connection is interrupted. The voice is distorted, but it does not make it misunderstandable.

Video comparing the loudspeakers and the microphone of a panel to those of iPad Air 2 and iPad Pro:

Panel setting (firmware version is 1.2.7):

1 Go to the web-interfaсe of the videophone panel and enter the login and password (by default they are admin and admin).

2 Set IP addresses of the videophone panel as it is required for the network of your SIP system.

3 Select audio codecs (G722 was tested).

4 Set the volume:

Speakerphone Volume - the volume of a loudspeaker;
Speakerphone Ring Volume - the volume of a call.

4 Set access parameters to external SIP server:

1. SIP client data to connect to the server:

Username - user name;
Display name - name displayed when calling;
Authentication User - user name used to register on the SIP server;
Authentication Password - user password used to register on the server;
Activate - enable / disable SIP profile.

2. Server data:

Server Address - server IP address;
Server Port - port;
Transport Protocol - data transfer protocol.

6 Set parameters of DTMF tones:

DTMF Type
DTMF SIP INFO Mode - a type of processing * (asterisk) and # (hash) buttons.

Click the Apply button. If connection to the SIP server is successful, Registered status of the account is displayed.

7 Set a call to a subscriber with the help of a button:

Memory Key - a subscriber that set beforehand is called (panel with i3Pro client);
Value 1 - the main number;
Value 2 - a reserve number.

8 Set up a key for DTMF:

DTMF Trigger Code - key for activating the relay;
DTMF Reset Code - code to reset DTMF Trigger Code.

i20S Model

This model has a built-in speaker and microphone. G722 audio codec is used for audio transmission. The intercom has no built-in echo cancellation, this model supports only noise cancelling. Compared to 2N, the sound quality is worse. The sound is not clear, an echo is heard. The intercom forwards the speech from the microphone to the speaker.

With iRidium SIP panel the interlocutor is hard to hear, sometimes the connection is interrupted.

Video comparing the loudspeakers and the microphone of a panel to those of iPad Air 2 and iPad Pro:

Panel setting (firmware version is 2.1.1.2527):

1 Go to the web-interfaсe of the videophone panel and enter the login and password (by default they are admin and admin).

2 Set IP addresses of the videophone panel as it is required for the network of your SIP system.

3 Select audio codecs (G722 was tested).

4 Set the volume:

Speakerphone Volume - the volume of a loudspeaker;
MIC Input Volume - microphone sensitivity.

5 Set access parameters to external SIP server:

SIP client data to connect to the server:

Username - user name;
Display name - name displayed when calling;
Authentication User - user name used to register on the SIP server;
Authentication Password - user password used to register on the server;
Activate - enable / disable SIP profile.

Server data:

SIP Proxy Server Address - server IP address;
SIP Proxy Server Port - port.

6 Set parameters of DTMF tones:

DTMF Type
DTMF SIP INFO Mode - a type of processing * (asterisk) and # (hash) buttons.

Click the Apply button. If connection to the SIP server is successful, Registered status of the account is displayed.

7 In addition to number dialing, this model supports call from a button (Hot Key). To call from the keyboard, you need to dial: asterisk (*), subscriber's number, asterisk (*).

Set a call to a subscriber with the help of a button:

Hot Key - a subscriber that set beforehand is called;
Value 1 - the main number;
Value 2 - a reserve number;
Line - a SIP line.

8 Set DTMF tones:

Remote Password - a password to activate the relay with iRidium SIP client;
Local Password - a password to activate the relay from the keyboards of the intercom.

Note

For high-quality work it is required to set the volume of the speaker and the microphone of the device in the web-interface. Standard values are set in the 1-9 range. The recommended value for i31S, i33V, i20S, i32V is 5. The recommended values for i10, i12N-01p, i16V models are 6-7.

The speaker quality of all models is poor. It affects the quality of the outgoing sound during the conversation. The devices have good built-in microphones.

The following technical limitations must be taken into account when working with the devices.

Working in iRidium Studio

1 Create a panel project.
2 Add SIP driver and set it.

The most important settings are marked with red.

Host - enter the IP-address of the call-panel (default address -192.168.1.5 )
Port - port of the call panel (always "5060" according to the SIP standard)
SIP ID - username of the SIP account activated in step 7 of this manual
Password - password of the SIP account activated in step 7 of this manual
Use SIP TONE - true, generate SIP messages of tone dial
Use DTMF Tone - false, do not generate regular messages of tone dial
Codec PCMU - true, activation of G.711μ audio codec
Codec PCMA - true, activation of G.711a audio codeс
Codec H264 - true, activation of H.264 video coder

Deactivate other coders (false)

3 Add graphic items to the project and set them.

4 Add the following script to the project:

outdoor_station_number = "0101010100"; // topological code of IPerVoice panel
var SIP = IR.GetDevice("SIP");   // name of SIP driver
var action = "CALL";             // default action
ButtonAction = IR.GetItem("Page 1").GetItem("Button_action");
LabelName = IR.GetItem("Page 1").GetItem("Label_name");
LabelNumber = IR.GetItem("Page 1").GetItem("Label_number");
SwitchVideo = IR.GetItem("Page 1").GetItem("Switch_video");
 
IR.AddListener(IR.EVENT_START,0,function()
{
  // display the SIP video
  IR.GetItem("Page 1").GetItem("Video").GetState(0).Image = "sip_image://";
});
 
IR.AddListener(IR.EVENT_TAG_CHANGE, SIP, function(name, value) {
  if (name == "STATUS") {
    var flagReady = (value == "On Hook..." || value == "Incoming Call...");
    ButtonAction.Enable = flagReady;
    var flagTalk = (value == "Talking...");   
    IR.GetItem("Page 1").GetItem("Button_door").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button1").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button2").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button3").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button4").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button5").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button6").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button7").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button8").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button9").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button0").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button_asterisk").Enable = flagTalk;
    IR.GetItem("Page 1").GetItem("Button_octothorp").Enable = flagTalk; 
    var flagConnect = (value == "Dialing..." || value == "Trying..." || value == "Ringing..." || value == "Talking..."
    || value == "Not Found..." || value == "Not Acceptable..." || value == "Not Available..." || value == "Service Unavailable...");
    IR.GetItem("Page 1").GetItem("Button_cancel").Enable = flagConnect;
    SwitchVideo.Enable = !flagConnect;
    if (value == "Incoming Call...") {
      action = "ANSWER";
      LabelName.Text = SIP.GetFeedback("INCOMING CALL NAME");
      LabelNumber.Text = SIP.GetFeedback("INCOMING CALL NUMBER");
    }
    if (value != "Incoming Call..." && value != "Talking...") {        
      action = "CALL";
      LabelName.Text = "---";
      LabelNumber.Text = outdoor_station_number;   
    }   
    var flagShow = (flagReady || flagConnect || flagTalk);
    LabelName.Visible = flagShow;
    LabelNumber.Visible = flagShow;             
  }		
});
 
function Talk() {
  SIP.SetFeedback("NUMBER", outdoor_station_number); // when calling number is required         
  SIP.Set(action, SwitchVideo.Value);                // call or answer, audio or audio+video
}

5 Set up graphic items to work with SIP driver and the script.

Setting a button to open the door

When a button on a call panel is pressed, a call begins. To open the door, a digital code must be sent, it can be set in the settings of the call panel (default digital code - “*50”)
1 Create a new script.
2 Add the following to it:

function SIPsendtone1(){
    var SIPdevice1=IR.GetDevice("SIP");
    SIPdevice1.Set("SEND TONE", 10); // отправка “*”
    SIPdevice1.Set("SEND TONE", 5);// отправка “5”
    SIPdevice1.Set("SEND TONE", 0);// отправка “0”
}

3 Creatre a button and assign to it the call of this script.

Demo project

Download the demo project

The panel project contains:

a display, showing video from the camera of the call panel in real time,
a keyboard to dial a number,
a call/answer button,
a cancel button,
a button to open the door,
display of the current status,
display of subscriber's data (name, number),
setting loudspeaker and microphone volume of i3 pro panel.