Эта страница является переводом страницы TempDeviation. Перевод выполнен на 100%.

---

Notification about incorrect work of climate control system

This article describes a situation when the current temperature does not reach the set value for a long time. In this case a user must be informed about incorrect work of equipment.
For example, a user must be notified if the difference between the current and the set temperature is more than 4 degrees for 4 hours.
Here is a step by step instruction how to do it.
1 Create a new project or open an existing one.
2 Add a driver you'll work with and set it.
3 Create feedback channels to display current and set temperatures.

4 Create a new script and add to it the following:

IR.AddListener(IR.EVENT_START,0,function() {
 
    var l_nIntervalMilsec = 1000*60*60*4; // conversion 4 hours to a miliseconds 
    var MinTempDeviation = 4; // Minimum temperature outflow
    var l_sDriverName = "KNX IP BAOS 770"; // The name of the driver used in the project.
    var l_sSetTemp = "SetTemp"; // Name of the feedback temperature setpoint
    var l_sTemp = "TempSensor"; // Name of the temperature sensor feedback  
 
    var l_nTimer = 0; // Number of seconds for the interval
    var l_nInterval = 0; // Interval
 
    // When the temperature arrives, we check if the temperature is higher than the set one, then we set the interval for counting 4 hours
    // Remove interval if everything is ok
    IR.AddListener(IR.EVENT_TAG_CHANGE, IR.GetDevice(l_sDriverName), function(m_sName, m_sValue){
        if(m_sName == l_sTemp) {
            var m_nSetTemp =  IR.GetVariable("Drivers."+l_sDriverName+"."+l_sSetTemp);
            if(Math.abs(m_nSetTemp - m_sValue) > MinTempDeviation){
                if(l_nInterval == 0){
                    SetInterval();
                }
            } else {
                if(l_nInterval != 0){
                    IR.ClearInterval(l_nInterval);
                    l_nInterval = 0;
                }
            }
        }
     });
 
    // The function sets the interval in which the temperature will be compared.
    function SetInterval(){
        l_nInterval = IR.SetInterval(1000, function(){
            var m_nSetTemp =  IR.GetVariable("Drivers."+l_sDriverName+"."+l_sSetTemp);
            var m_nTemp =  IR.GetVariable("Drivers."+l_sDriverName+"."+l_sTemp);
            if(Math.abs(m_nSetTemp-m_nTemp) > MinTempDeviation){
                l_nTimer++;
                if(l_nTimer >= l_nIntervalMilsec){
                    Alarm();
                    l_nTimer = 0;
                }
            }
        });
    }
 
    // The function that calls the necessary notification - inside this function you can use the necessary notification method 
    function Alarm(){
        IR.Log("Attention temperature difference of 4 degrees is kept for 4 hours");
    }
});

5 Write your values in the variables:

• l_nIntervalMilsec - time interval in miliseconds
• MinTempDeviation - difference between temperatures
• l_sDriverName - name of driver used in the project;
• l_sSetTemp - name of feedback channel, displaying the value of the set temperature
• l_sTemp - name of feedback, displaying the value of the current temperature.
  

6 Write a required notification means in the Alarm function. For example, Push-notifications can be used.

download:

• An example