The documentation was updated on 10.9.2026
10/09/2026 iRidi Setup 1.3.89.42781
Client (1.3.89.42781)
- I-CAN-Modbus Gateway: Added universal firmware support for GTC Syberia, TURKOV Capsule/iVent/Zenit, and ROYAL CLIMA Soffio Primo 3.0 ventilation units.
Android (1.3.89.42781)
- Updated the target Android SDK version to meet the latest Google Play requirements.
Studio (2.0.82.42781)
Bus77 Project:
- I-CAN-MODBUS: Profile 10 (Universal Vent). Added universal firmware support for GTC Syberia, TURKOV Capsule/iVent/Zenit, and ROYAL CLIMA Soffio Primo 3.0 ventilation units.
- I-CAN-DALI-L1. Added control items for DALI groups with DALI RGB and RGBW devices.
- I-CAN-DALI-L1. Added control via schedules.
- I-CAN-DALI-L1. Added control of DALI Groups via scenes.
- I-CAN-DALI-L1. Added a new setting: "Min. dimming threshold."
- Temperature sensor. Fixed error indication for open circuit and short circuit faults.
- Current sensor. Changed the minimum value for the "Calibration value" parameter.
Server Project:
- Added a new sub-device "Universal Ventilation" in voice assistants: Yandex Alice Platform, VK Marusya, Sber Salut.
- DT8 (TW): Added Color Temperature feedback support.
- DT8 (RGB): Added RGB feedback support.
- DT8 (RGBW): Added RGB and White feedback support.
- DALI Groups: Added support for RGB and White commands, as well as Color Temperature, RGB, and White feedback.
22/07/2026 iRidi Setup 1.3.88.42742
Client (1.3.88.42742)
- Fixed app crash when opening the rules menu at the moment of an End of Hold event.
- AV-R. Fixed an issue where focus would not leave the Multistate Level item when navigating with a joystick.
- Fixed an issue where releasing the slider would return it to the second-to-last value for all Level-type items.
- Bus77 Driver. Fixed client crash when selecting Touch Panel rev. 2 in the "Used with iRidi device" property.
- Multistate Circular Level. Fixed an issue where the maximum range value could not be selected.
- Added client and server health metric tokens - easier system state diagnostics.
Scripts:
- Fixed IR.EVENT_POPUP_ITEM_CHANGE behavior.
Android (1.3.88:42742)
- Android. Fixed a rare error causing the app to crash on startup.
iOS (1.3.88:42742)
- Raised the SDK version for iOS - compatibility with current App Store requirements and more stable performance on newer iOS versions.
Server (1.3.88.42742)
- Fixed driver operation on Serial/COM ports in Windows.
- iRidi Server. Optimized algorithm for removing outdated system tags.
- Modbus RTU. Eliminated ~12 sec feedback delay after Function 05/06 write commands.
- Clarified the wording of the "Unsupported platform for network settings operations" error caused by attempting to change settings not supported on the current platform.
- Fixed a rare error causing an involuntary server reboot.
- Added client and server health metric tokens - easier system state diagnostics.
Studio (2.0.81.42742)
Server and Panel project:
- Modbus TCP Network Driver. Fixed duplication of sequence numbers in feedback names when copying folders in a subdevice.
- LineChart item has been released and received a unique icon.
- Fixed Studio crash when dragging a folder with attachments into another folder.
- Added client and server health metric tokens - easier system state diagnostics.
Bus77 Project:
- Added bus diagnostics and recovery mechanism - detection of bus discrepancies with the project and elimination of unexpected device behavior.
- DM-340 (Profile 2) and DM-1206P/PC/PS (Profile 2). Added support for "Scheduled" thermostat mode.
- *.b77 projects are now associated with Studio and open with a double click.
- FM-808 LED. Added "Restore last value" parameter for "Startup behavior" setting.
- DM-340 (Profile 2). PID-controlled thermostats. Fixed settings layout.
- Relay. Fixed data display when loading a project in the "Relay auto-off (sec)" setting.
- Button. Fixed error with resetting the "Double-click speed (ms)" parameter.
- Curtains. Fixed upper limit for open/close time.
- DALI. Fixed color change popup offset for DT8 (RGB/RGBW).
- DALI. Relay groups. Added translation of link actions from button to relay group.
- Fixed naming error for a new device when its name matches an existing one in the project.
- Fixed missing blocking popup during repeated device resets.
- Fixed missing status state display when switching tabs.
01/06/2026 iRidi Setup 1.3.87.42626
Server (1.3.87.42647)
20/04/2026 iRidi Setup 1.3.87.42626
Client (1.3.87.42626)
- Fixed incorrect behavior of Multistate Level with Momentary Feedback.
- Fixed application freeze upon loss of network connection.
- Fixed loss of client-server connection when loading a graph in Linear Trend.
Scripts:
- Fixed AES encryption operation in the IR.CreateEncryption method for correct handling of encrypted data.
Drivers:
- AV-R. P3. Fixed the initial state of buttons upon project startup.
Windows:
- Optimized the mechanism for creating the Style folder when launching the client to prevent it from being included in the project.
- Fixed a memory leak in the application.
Android (1.3.87:42638)
- Optimized i3Pro Kiosk Mode operation when waking from standby.
- Fixed reset of system screen orientation when opening and closing the application.
- Fixed application returning to its original position after closing the keyboard.
- Fixed incorrect cursor position when entering characters using the virtual keyboard.
iOS (1.3.87:42627)
- Fixed sending cloud PUSH notifications.
- Fixed application returning to its original position after closing the keyboard.
Server (1.3.87.42626)
- Modbus TCP Server (Slave mode). Fixed incorrect data conversion error.
- Fixed validation of KNX color settings for type 251.* Colour RGBW in server projects.
- Fixed incorrect switching of Inputs port operating modes for ProAV Control Processor.
- On the server web interface start page, the offline mode toggle button no longer overlaps the text and is always clickable.
Studio (2.0.80.42626)
Server and Panel project:
- Improved properties of Level item groups to prevent incorrect behavior in previously created projects.
- Fixed incorrect position and rendering of pop-up windows when moving the Studio window, as well as tabs after minimizing the application.
- Fixed the display of the device list in drivers supporting the "Used with IRidi device" property.
- Fixed the display of the states tab for the Edit Box item.
- Fixed the operation of the "Show cursor" flag in the i3 Pro emulator window.
- Fixed an error importing KNX projects containing apostrophe characters.
- Fixed validation of KNX color settings for type 251.* Colour RGBW in server projects.
- Added a check for unique folder names when moving nested folders to the project root.
- Fixed a memory leak when loading and deleting a large number of images in the project's resources.
Bus77 Project:
- Improved the IP address input form when searching for the Bus77 bus: reduced error rate and simplified device configuration.
- Fixed display of device names after reopening the project.
- Fixed the appearance of the "New Thermostat Mode" pop-up when flashing to an earlier firmware version.
- Fixed overlapping of Heater and Cooler action settings in thermostat schedules.
- Fixed missing button parameter generation after a failed device firmware update.
- Fixed an issue where identical schedules could not be created for sub-devices of the same device.
Drivers:
- Fixed CSV file import for the BACnet driver.
13/01/2026 iRidi Setup 1.3.86.42513
Client (1.3.86.42513)
- Fixed incorrect behavior of the Multistate Circular Level item.
Server (1.3.86.42513)
- Fixed a project loading from cloud error that occurred in certain cases.
Studio (2.0.79.42513)
- Fixed an error that blocked the Channel Only property of the Trigger Button item when assigning tokens.
10/12/2025 iRidi Setup 1.3.85.1.42505
Studio (2.0.78.42505)
- Fixed a bug where values in the Data string of certain driver commands were not being saved after reopening the project.
08/12/2025 iRidi Setup 1.3.85.42499
Client (1.3.85.42499)
- Fixed flickering of the "Level" type item during delays in receiving feedback.
- URRI Driver. Optimized feedback reception time.
- Modbus TCP/IP Driver. Fixed errors when receiving incorrect feedback.
- Fixed incorrect copying of graphical items using the JS Clone method.
Server (1.3.85.42499)
- Modbus TCP/IP Driver. Fixed errors when receiving incorrect feedback.
- Modbus RTU Driver. Fixed the error of echo removal when sending commands.
- URRI Driver. Optimized feedback reception time.
- Fixed a server error with the offline license when deleting a server project.
Studio (2.0.77.42499)
- Fixed a bug in project saving when changes were made in Item programming.
- Optimized automatic creation of Delay in Item programming.
- Implemented copying of drivers and networks.
- Added the ability to change the order of projects in the tab panel.
- AV & Custom Systems Driver: Fixed deletion of the last bytes in the Data field of a command.
13/11/2025 iRidi Setup 1.3.84.1.42454
Server (1.3.84.42454)
- Stability of sunchronization between i3 Pro and the cloud is improved by using automatic switching to backup hosts when facing network limitations.
30/10/2025 iRidi Setup 1.3.84.42450
Studio (2.0.76.42450)
Bus77 Project:
- DM-1206FCC. Profile 1. Added the ability to configure and manage a fan coil unit.
- Added the ability to control the "Voltage Regulator" sub-device via the "Master Button" mode.
- Fixed editing of the "Timer Value (min)" parameter for the CO2 Sensor.
- Fixed editing of the "Consider device state" relation for the "Master Button".
- Fixed synchronization of device/sub-device selection between the "Devices" and "Connections and Logic" tabs.
Server and Panel project:
- Corrected the operation of the CO2 value channel for the VAKIO sub-device in the YandexAlicePlatform driver.
Server project:
- Added a new "Fan Coil" sub-device to the voice assistants: Yandex Alice Platform and Sber Salut.
Client (1.3.84.42450)
- DM-1206FCC. Profile 1. Added the ability to configure and manage a fan coil unit.
13/10/2025 iRidi Setup 1.3.83.42431
Client (1.3.83.42428)
- Added support for the I-PX-IR3 driver in the panel project.
- Trigger Button. Improved the logic for the "Channel only" feedback channel.
- Added support for new hardware in the HDL Buspro Network driver.
- Added a driver for YENISEY/ProTone audio equipment.
Android (1.3.83.42428)
- Improved joystick navigation in the project for the AV Remote Control device.
- Fixed an issue with receiving the Device.Name system token on Android devices.
Server (1.3.83.42428)
- Improved the Modbus RTU driver to enhance connection stability.
- Offline Licensing. PIN/PUK codes have been replaced with fully functional PIN/PUK passwords, 12 to 30 characters in length.
- Implemented the activation and configuration of the health metrics collection interval via the server's web interface.
- ZONT Driver: Fixed feedback receiving.
- Fixed feedback handling for the Modbus TCP Server driver (Slave mode).
Studio (2.0.75.42431)
- Improved the feedback channels and the Key Programming menu for physical keys of the AV Remote and Touch Panel P3.
- Domintell driver: Fixed an issue with the DMR02 device scanner.
17/09/2025 iRidi Setup 1.3.82.4.42362
Client (1.3.82.42362)
28/08/2025 iRidi Setup 1.3.82.3.42357
Studio (2.0.74.42357)
- Recovery of scripts for the RGB Dimmer is fixed.
19/08/2025 iRidi Setup 1.3.82.2.42353
Studio (2.0.73.42353)
18/08/2025 iRidi Setup 1.3.82.1.42350
Client (2.0.72.42350)
Server (1.3.82.42350)
- Added God’s Eye SCADA connectivity support.
- Added activation and configuration of the "Collect performance metrics" data collection interval for God’s Eye SCADA in the web interface.
13/08/2025 iRidi Setup 1.3.82.42332
Studio (2.0.71.42332)
Bus77 Project:
- DALI Groups. Relations. Added the ability to create dimming connections for empty groups (for button control, motion sensor brightness adjustment, and light sensor-based brightness changes).
- DALI Groups. Settings. Added a slider for color temperature control.
- Fixed restoring connections after replacing a faulty device for FS-BT6-OLED.
- Fixed freezing issue when adjusting temperature via scroll wheel on the Thermostat.
- CAN-DALI Gateway. Fixed gateway scanning after a scan error.
- Fixed device scanning for replacement when no devices are available in the "Devices to Add to Project" window.
Server and Panel project:
- Bus77 Driver. VAKIO. Implemented support for IncomeCO2_1-4 commands.
- Bus77 Driver. DALI Groups. Added the ColorTemperature command for group color temperature control.
- Bus77 Driver. Thermostat. The IncomeTemperature and IncomeErrorCode commands are added.
Client (1.3.82.42332)
- Bus77 Driver. DALI Groups. Added the ColorTemperature command for group color temperature control.
21/07/2025 iRidi Setup 1.3.81.42265
Client (1.3.81.42265)* Errors are fixed.
16/07/2025 iRidi Setup 1.3.80.42256
Studio (2.0.70.42256)
Bus77 Project:
- I-CAN-MODBUS. Profile 8 (VAKIO): Added configuration and control capabilities for ventilation systems.
- RGB Dimmer: Added color control from scenarious and schedules.
- TW Dimmer: Added auto-turn-on for the dimmer when changing color temperature from a scenario.
- Added detection of devices without firmware or offline.
- Added automatic TCP port detection for control devices.
- Added linking between a motorized curtain and a button/schedule: for opening/closing and changing the operating mode.
- Unified wording for actions in schedules.
- Removed automatic link creation between a script and the master switch.
- Fixed crash when power is reapplied with the device settings popup open.
- Fixed recovery after replacing a faulty device.
- Fixed duplication of schedules after restoring from an "Error" state.
- Fixed time recovery after replacing a faulty device.
- Fixed schedule editing for Curtains.
- Fixed action recovery in scripts for Leak Sensors.
- Fixed action recovery in scripts for I-CAN-DALI-L1.
- Fixed time display when opening projects.
- Fixed freezing of the scanning popup when adding a previously configured CAN-DALI gateway.
- Onokom: Bug fixes.
Server project:
- Added a new subdevice "VAKIO Ventilation" in voice assistants: Yandex Alice Platform, VK Marusya, Sber Salut.
Client (1.3.80.42256)
- I-CAN-Modbus Gateway: Added support for VAKIO ventilation units.
08/07/2025 iRidi Setup 1.3.79.3.41948
Studio (2.0.69.41948)
04/07/2025 iRidi Setup 1.3.79.2.41941
Studio (2.0.68.41941)
02/07/2025 iRidi Setup 1.3.79.1.41934
Studio (2.0.67.41934)
18/06/2025 iRidi Setup 1.3.79:41920
Client (1.3.79:41920)
Drivers:
- Added support for the I-PX-IR3 Ethernet converter driver with 3 independent IR channels. link
- Domintell. Added support for the 8-channel monopolar relay board DMR02. link
- Added support for the DigiSyntetic driver. link
- Added support for the Philips HUE driver. link
- Fixed register duplication issues in Modbus TCP Slave operation.
- Visca Over IP. Corrected feedback processing for multi-driver projects using Visca Over IP.
Android (1.3.79:41920)
- Android. Added warning message display when required app permissions are missing.
Server (1.3.79:41920)
- HS Server. ProAV Control Processor. Added custom NTP server configuration via web interface.
- RPI. Resolved web-interface server update issues.
Drivers:
- Added support for the I-PX-IR3 Ethernet converter driver with 3 independent IR channels. link
- Domintell. Added support for the 8-channel monopolar relay board DMR02. link
- Added support for the DigiSyntetic driver. link
- Added support for the Philips HUE driver. link
- Fixed register duplication issues in Modbus TCP Slave operation.
- Visca Over IP. Corrected feedback processing for multi-driver projects using Visca Over IP.
- Added an integration module for the external "AUVIX Pack" driver package with JSON-based import capability. link
Studio (2.0.66.41920)
- KNX Smart Import. Fixed the display of added/removed addresses when importing from ETS.
- Hotkeys. Fixed functionality issues. link
- Added the Collapse/Expand All buttons for tree lists.
- Implemented project name display in the studio window title.
- Fixed a crash when saving after project merging.
- Fixed a crash during project synchronization.
- Added functionality to save the position of all pop-ups and workspace splitters.
- Expanded IR code database for iRidi devices: ProAV Control Processor, AV Remote Control, I-PX-IR3. link
Scripts:
- JS Editor. Fixed text scaling issue when using Ctrl + Scroll.
Drivers:
- I-PX-IR3. Implemented the I-PX-IR3 Ethernet converter driver with 3 independent IR channels. link
- IR Learning. Added support for learning via I-PX-IR3 devices. link
- AV Remote Control. Touch Panel P3. Added the Key Programming tool for configuring physical button triggers. link
- AV Remote Control. Touch Panel P3. Added a quick setup tool for assigning a server project. link
- Domintell. Added support for the 8-channel monopolar relay board DMR02. link
Panel project:
- WorkSpace. Implemented functionality to open pages and popups in separate workspace tabs.
- WorkSpace. Fixed the relation counter for graphical items.
- Added text rotation capability for graphical items. link
- Synchronized "All States" values for text blocks between Properties panel and Text Editor window.
- Fixed an issue with macro movement between programming window tabs.
Server project:
- Fixed the addition of inputs for the Interlock block-schemes.
- iRidi Server. Fixed server cyclic synchronization.
- Routines. Fixed the parameter name in the Then tab of the routine creation window. link
- Implemented a restriction mechanism preventing the use of iRidi Server tokens in Virtual driver command and feedback names.
16/05/2025 iRidi Setup 1.3.77.41198
Server (1.3.78.41205)
- Improved application performance and reduced PROCESSOR load by optimizing code, which ensures smoother operation and saves system resources.
- Fixed an error that causes the server to reboot after updating the project.
- The use of tokens for monitoring the status of servers has been optimized in order to increase system stability.
21/04/2025 iRidi Setup 1.3.77.41198
Client (1.3.77.41198)
- License. The incorrect recognition of the error response from the cloud when requesting a license is fixed.
Studio (2.0.65.41198)
Server project:
- Routines. The errors saving schedules in "But Only If" are fixed.
Bus77 Project:
- Fixed triggering of the connection when it is modified.
16/04/2025 iRidium Setup 1.3.76.1.41185
Studio (2.0.64.41185)
Bus77 Project:
- Added "Schedule" mode for Thermostat.
- Improved scheduling functionality for Dimmer, RGB Dimmer, and Voltage Regulator.
- Optimized UX of the Master Button relation settings.
- Changed value update animation in settings.
- Fixed a firmware update issue for the Master Button.
- Fixed an infinite connection loop when closing a project with an active search query.
- The error of updating values in scenes is fixed.
Server and Panel project:
- Fixed a sync issue between panel and server projects when renaming devices/subdevices in a .bus77 project.
- Fixed a bug causing deselection of multiple items when moving elements in the device tree.
Server project:
- The error that caused the system database settings to be reset when synchronizing with the bus77 driver in the server project is fixed.
02/04/2025 iRidium Setup 1.3.76.0.41081
Studio (2.0.63.41081)
- An error with displaying the Event tab in the main menu is fixed.
31/03/2025 iRidium Setup 1.3.76.41079
Client (1.3.76.41079)
- Added support for the Touch Panel P3 platform.
- BlurDepth Effect. Synchronized blur intensity in the application on Windows and iOS.
- License. Improved handling of license receiving errors.
Drivers:
- ODBC. Implemented methods for working with Cyrillic characters. link
- AV&CS HTTP. Fixed data loss during repeated sending with Digest authentication.
- AV&CS HTTP. Fixed header case sensitivity preservation
- Yealink. Added commands for controlling additional remote buttons. link
- Added a driver for the Intrend video switching equipment. link
- Lutron (LEAP). Increased the value passed to ID Area.
Android (1.3.76.41079)
- AV-R. Fixed the functionality of the Back button.
Server (1.3.76.41079)
- Improved synchronization between transport streams and drivers to enhance server stability.
- Tokens. Implemented a set of tokens for monitoring server status and integration with iRidi SCADA. link
- License. Improved handling of license receiving errors.
- Fixed saving a tag’s zero value to the database.
- Added support for loading custom SSL certificates for Secure Connection (HTTPS) to the web interface. link
Drivers:
- MS EWS. Fixed request freezing during CallBack function execution.
Studio (2.0.62.41079)
Drivers:
- Yealink. Added commands for controlling additional remote buttons.
- Z-Wave.me. Fixed an issue with feedback settings reset when modifying command settings.
Panel project:
- Programming. Added a relation to the Limit parameter for the Up/Down Button item to edit limit values.
Server project:
- Script Modifier. Fixed the import of server projects where Script Modifier is assigned.
- Schedule. Fixed the simple schedule configuration to display the scheduled execution date.
Bus77 project:
- The logic of the Reset Alarm button for Thermostats in Error Mode has been changed.
- Fixed the data receiving mechanism for connection establishment and recovery.
10/03/2025 iRidium Setup 1.3.75.40781
Client (1.3.75.40781)
- I-CAN-MODBUS. Onokom. A possibility to configure and control air conditioners is added.
- A new subdevice "Thermostat with AC" is added in voice assistants: Yandex Alice Platform, VK Marusya, Sber Salut.
- Line Chart. The "object is not callable" error is fixed when using SetCurveTag method.
iOS (1.3.75:40760)
- URL schemes. A call error on iOS is fixed.
Studio (2.0.61.40781)
Bus77 Project:
- I-CAN-MODBUS. Onokom. A possibility to configure and control air conditioners is added.
- Thermostat. A possibility to keep the temperature in the specified range is added.
- Touch screen thermostat. Configuration link and control of the thermostat touch panel are added. link
- Relay. The channel for setting up automatic relay switching is added. link
Server and Panel project:
- A possibility to scroll the device tree when moving items using the Up/Down buttons is added.
Server project:
- A new subdevice "Thermostat with AC" is added in voice assistants: Yandex Alice Platform, VK Marusya, Sber Salut.
- The error of missing previously configured relations in projects with the Bus77 driver is fixed.
20/02/2025 iRidium Setup 1.3.74.0.40531
Studio (2.0.60.40531)
Server project:
- Routines. An error with saving routines in a server project is fixed.
- Routines. An error with moving commands in the routines editing window is fixed.
18/02/2025 iRidium Setup 1.3.74.40523
Client (1.3.74.40522)
- The bug with automatic focus on the EditBox item is fixed.
04/02/2025 iRidium Setup 1.3.73.40515
Client (1.3.73.40515)
- Line Chart. The ability to view the value at a selected point on the item's curve is added. link
- Adaptation of the client for devices with small screens is added.
- Navigation of buttons and hotkeys in the project is fixed.
- Stability of i3Pro client connection via iRidi Cloud Gate is improved.
Drivers:
- Microsoft Exchange. New version of the native Microsoft Exchange Web Services (EWS) driver is added. link
- Modbus TCP Network. The error of receiving data in the feedback of the Single poll mode for the Modbus TCP Network driver is fixed.
- Lutron Homeworks QS. Temperature deviation parameters are added to the Get/set single setpoint driver command. link
Server (1.3.73.40515)
- Support for the Wiren Board 8.4 platform is added.
- The error of saving status of edited schedules is fixed.
- Serial transport version for KNX driver is updated.
Scripts:
- The error of outputting XML objects to the server log is fixed.
Drivers:
- Microsoft Exchange. New version of the native Microsoft Exchange Web Services (EWS) driver is added. link
- Modbus TCP Network. The error of receiving data in the feedback of the Single poll mode for the Modbus TCP Network driver is fixed.
- Lutron Homeworks QS. Temperature deviation parameters are added to the Get/set single setpoint driver command.
- Yandex Alice Platform. Limiting log output for the driver.
Studio (2.0.59.40515)
- AMXProject. A studio crash is fixed when opening a TP5 format project.
Drivers:
- Limit for creating driver feedbacks and tokens of the same name is added.
- Error with obtaining SSL certificates in HTTP drivers when starting the emulator is fixed.
Scripts:
- Layout of quick action buttons panel in the Script Editor window is fixed.
Panel project:
- Programming. The localization package for the new Programming tab is updated.
- Programming. The ability to go to an object through a relation/macro in the Programming tab is added. link
- Navigating around the workspace using the "Hand" cursor is improved. link
- Shifting of the workspace when resizing the popup beyond the page boundary is fixed.
- The error of saving colors to the project palette is fixed.
- The typo in the name of the graphic items parameter is fixed.
Server project:
- Routines: the error of the empty line in the Feedback column after deleting the associated channel is fixed.
- Schedule. In the advanced schedule, the name of the "End of repetition" item is corrected.
- Schemes. The size of blocks of the "From Channel", "To Channel", "From Tag" and "To Tag" type is fixed.
- Schemes. The error when transfering block schemes to XML of a panel project when merging a server project is fixed.
Bus77 Project:
- The error of reflashing a device with the same profile and firmware version is fixed.
- A studio crash is fixed when replacing a faulty device by clicking the "Replace device" button.
- The error of displaying a popup when replacing a faulty device is fixed.
- A studio crash is fixed when reading a device after flashing to replace the faulty device.
- DM-1400. The error of displaying subdevices when changing the type is fixed.
18/12/2024 iRidium Setup 1.3.71.1.40074
Studio (2.0.58.40074)
Bus77 Project:
- I-CAN-DALI. The ability to broadcast on/off devices on the line is added.
- Leakage sensor. Scenarios and relations with Relay and LED are added.
- Button. The "Locked Button" mode is added.
- Thermostat. Silent mode is supported.
- The function of replacing a faulty device is added.
- Errors are fixed.
Server and Panel project:
- Bus77 driver. The ability to hide subdevices is added.
Panel project:
- The error related to moving macros using arrows when programming items is fixed.
27/11/2024 iRidium Setup 1.3.71.0.39753
Client (1.3.71.39753)
- The i3 Pro application has been rebranded.
- Routines. Custom translation of the page interface for editing routines is added. link
- The error of receiving the device orientation system token is fixed.
Drivers:
- Support of the Casambi driver is added. link
- Support of the Televic Conference (Secured API) driver is added.
- Support of the driver for the WiiM Pro network players is added. link
- Optimizing and speeding up processing queue of the serial port query. link
Android (1.3.71.39753)
- AV Remote Control. The ability to control the base station backlight from the system menu is added. link
- AV Remote Control. The i3 Pro app restart when KIOSK Mode running is fixed. link
Server (1.3.71.39753)
- The iRidi Server application has been rebranded.
- AV&Custom Systems (SSH). The parameter for reconnection interval in case of long response from equipment is added.
Studio (2.0.57.39753)
- A vulnerability in project protection is fixed. Since version 1.3.71, it is recommended to update the password for project editing access (Project setting -> Passwords -> Change password).
- The iRidi Studio application has been rebranded.
- The error that caused the application to freeze when synchronizing projects is fixed.
- The error that caused items to disappear into external code editors when drag&dropping is fixed.
- The problem with moving in the tree using keys is solved.
- The problem when sorting with expanded search in windows is solved.
Panel project:
- Trigger Button. The ability to change state from the "Channel only" feedback is added. link
- The error with moving internal windows when deleting a graphic item is fixed.
- Programming. The error with the "Delete all links and commands" from the graphic item functionality is fixed.
- Programming. The problem when copying relations between items is solved.
Drivers:
- MyHome Network (Beta). The error of displaying the A, PL parameters when changing the Type parameter is fixed.
- The error of copying devices from the network to the tree is fixed.
- The error of numbering in subdevice names when copying is fixed.
- The error when channels can't be drag&dropped from the device tree is fixed.
7/11/2024 iRidium Setup 1.3.70.1.39360
Server (1.3.70.39360)
30/10/2024 iRidium Setup 1.3.70.0.39357
Client (1.3.70.39357)
- A new graphic item is added: Line Chart. link
- Ability to set negative values relative to sunset/sunrise when editing schedules is added. link
Scripts:
- Work of image indent parameters when cloning graphic items is fixed.
Drivers:
- BacNet: driver stability when sending the ReadProperty requests is improved.
- Domintell. Equipment reconnection errors are fixed.
- Yamaha Network. Ability to control the "tv" input is added.
Project menu:
- Work of the SCAN QR-CODE button is fixed.
Android (1.3.70:39357)
- The lowest supported version of Android is changed from 4.4 to 5.0.
Server (1.3.70.39357)
- Support of the IEEE 802.1x access control and authentication protocol is added to the ProAV Control Processor hardware platforms.
- Logging of authorization events to the iRidi Server web interface with offline licensing is added.
- System for auto-cleaning logs is implemented. link
Drivers:
- BacNet: driver stability when sending the ReadProperty requests is improved.
- Domintell. Equipment reconnection errors are fixed.
- Yamaha Network. Ability to control the "tv" input is added. link
Studio (2.0.56.39357)
- The search and display of tree items in the device panel is fixed.
Panel project:
- A new graphic item is added: Line Chart.
Server project:
- A tool for quickly assigning the Bus77 driver and devices to the Alice voice assistant (Yandex Alice Platform) is added. link
Scripts:
- Work with external script editors is improved.
Drivers:
- Ability to update the Source ETS Project file in existing KNX IP Router drivers is added. link
- The Synchronization button is removed from the context menu of the iRidium Server driver if there is no project file in the Source Project parameter.
- Movement of channels between subdevices of the ProAV Control Processor, AV Remote Control and DigiBird UniManager drivers is limited.
- Copying channels to the device tree area from AV & Custom TCP/UDP Network and AV & Custom HTTP Network is limited.
- Movement of subdevices within the ProAV Control Processor, AV Remote Control and Digibird UniManager networks is fixed.
8/10/2024 iRidium Setup 1.3.69.0.38442
Client (1.3.69.38442)
- I-CAN-Modbus gateway. Support of the Royal Clima ventilation units of the SOFFIO PRIMO model range is added.
Studio (2.0.55.38442)
Bus77 Project:
- I-CAN-Modbus gateway. Support of the Royal Clima ventilation units of the SOFFIO PRIMO model range is added. link
- Support of light alarm clock functionality is added for TW Dimmer. link
- Errors are fixed.
Server project:
- A new sub-device "Royal Klima Ventilation" is added for voice assistants:
- Yandex Alice Platform;
- VK Marusya;
- Sber Salut.
16/09/2024 iRidium Setup 1.3.68.0.38344
Client (1.3.68.38344)
- Support for I-CAN-Modbus gateway.
- The Minibox ventilation system with Zentec automation. Support for a new sub-device has been added to the I-CAN-Modbus: Zentec M100 air handling unit.
- Hisense air conditioners. Support for a new subdevice has been added to I-CAN-Modbus: Hisense air conditioner through B544(E) adapter.
Studio (2.0.54.38344)
Bus77 project:
- Support for I-CAN-Modbus gateway. link
- The Minibox ventilation system with Zentec automation. Support for a new sub-device has been added to the I-CAN-Modbus: Zentec M100 air handling unit. link
- Hisense air conditioners. Support for a new subdevice has been added to I-CAN-Modbus: Hisense air conditioner through B544(E) adapter. link
- Bug fixes.
Server project:
- Added a new “Ventilation” sub-device in voice assistants:
- Yandex Alice Platform; link
- VK Marusya;
- Sber Salut. link
31/07/2024 iRidium Setup 1.3.67.0.38221
Client (1.3.67.38221)
JavaScript:
- ToTimeString() and ToDateString() methods for the iDate class are implemented. link
Drivers:
- Bus77 driver. The "Frequency of line requesting" parameter for prompt display of the Online/Offline statuses of devices in projects is added. link
- Stability of the Global Cache driver is improved.
Android (1.3.67:38184)
- The amount of information displayed in Push notifications is increased.
Server (1.3.67.38221)
JavaScript:
- ToTimeString() and ToDateString() methods for the iDate class are implemented. link
Drivers:
- Bus77 driver. The "Frequency of line requesting" parameter for prompt display of the Online/Offline statuses of devices in projects is added. link
- Digibird. iRidium Server integration on UniManager-B Control Processor (Digibird) is implemented. link
- Digibird. The IR.EVENT_RECEIVE_TEXT, IR.EVENT_RECEIVE_DATA function using the Subdevice pointer of the driver on UniManager-B Control Processor (Digibird) are implemented. link
- Stability of the Global Cache driver is improved.
- Yandex Alice. Different dimmer options to the Yandex Alice Platform driver are added. link
Offline licensing:
- Offline License. Web interface for downloading projects and estimating free storage space is fixed.
Studio (2.0.53.38221)
- Delay. Units of measure are added to delay in server project routines and panel project programming. link
JavaScript editor:
- ToTimeString() and ToDateString() methods for the iDate class are implemented. link
Panel project:
- Programming. Panel project. New view of the Programming tab: the length of the connection is shorter
- Programming. Saving the focus of the selected parameter when opening macro editing is fixed.
- Programming. When you copy a connection or macro from one item to another, the link to the original item is replaced by a link to the new one. link
- Fonts. A problem with adding fonts which family name does not match the main name is fixed.
- Fonts. The font is automatically highlighted when focus is placed on the field, scrolled through with arrows and searched for by typing.
- Fonts. The "Delete" option for fonts used in the project is hedden from the context menu.
Server project:
- Virtual. A tool for mass creation of virtual feedback with the ability to automatically link commands in the Devices>Virtual tab is added. link
Drivers:
- Bus77 driver. The "Frequency of line requesting" parameter for prompt display of the Online/Offline statuses of devices in projects is added. link
- Fixed the appearance of duplicate events in schedules after flashing the device.
23/07/2024 iRidium Setup 1.3.66.1.37613
Studio (2.0.53.37613)
Bus77 project:
- Support for the I-CAN-DALI-L1 gateway has been added:
- Broadcast button;
- Support for 127 iRidi scenarios.
- The project storage format has been changed from *.irb77 to *.b77.
25/06/2024 iRidium Setup 1.3.66.1.37567
Studio (2.0.53.37562)
Bus77 project:
- Support for OCS leak sensors (FS-WT-OCS-BIF, FS-WT-OCS-OTF).
- Bugs fixed.
06/06/2024 iRidium Setup 1.3.66.0.37494
Client (1.3.66.37494)
The Android client version will be released on Monday, 17.06.2024.
Bus77:
- Added support for devices with 127 scenarios, new interface for scenario configuration. link
- Added support for devices with improved button functionality. link
Server (1.3.66.37494)
Bus77:
- Added support for devices with 127 scenarios, new interface for scenario configuration. link
- Added support for devices with improved button functionality. link
Studio (2.0.52.37494)
Bus77 project:
- Added support for devices with 127 scenarios, new interface for scenario configuration. link
- Added support for devices with improved button functionality. link
17/04/2024 iRidium Setup 1.3.65.0.37309
Client (1.3.65.37309)
Drivers:
- Sonos. The connection between the driver and the equipment is restored.
Server (1.3.65.37309)
Drivers:
- Yandex Alice. Stability of connection to the cloud service during periods of increased load is increased.
Studio (2.0.50.37309)
Bus77 project::
- TW dimmer. New subdevice is added: TW dimmer.
- FS-BT6-OLED. New sub-device FS-BT6-OLED (Thermostat Screen) is added.
- Curtains. Support for phase and pulse control is added.
- Voltage regulator. Control from Bus77 buttons and sensors is added.
- UMC. Function for automatic sockets closing while working with a line is added.
- Process of flashing devices that leads to errors during flashing (disabling ping and second connection) is fixed.
- Warning popups about the need to update the firmware and about the impossibility of updating the firmware is added.
10/04/2024 iRidium Setup 1.3.64.0.37089
Client (1.3.64.37089)
Drivers:
- SIP. SIP client connection via Linphone SIP Service to make audio/video calls is configured.
- SIP. Video communication with the Akuvox panel is improved: for transmitting a video stream and when making video calls.
Server (1.3.64.37089)
Drivers:
- AV & Custom System (WebSocket). Passing values when using the Headers parameter is fixed. Now, when adding the Headers parameter, the logic for sending data will not break.
- Modbus RTU. The Modbus RTU driver, TCP Gate protocol, for the HSS server is improved. Now the HSS server will be able to receive data from Modbus devices.
- Domintell. The Domintell driver for the DISM20 module is improved. Now the DISM20 channel addresses will be read in full and in the correct order.
Offline licensing:
- Offline License. The encryption method for the client-server connection to increase the level of data security is changed.
Studio (2.0.49.37089)
Drivers:
- KNX. The scene numbering has been changed in accordance with ETS5 (from 1 to 64) and now there is no need to match the numbers when working in iRidium Studio.
- iRidium Server. Remote Cloud Control connection type was renamed to Direct & Remote Cloud Control for greater information content.
- AV Remote Control / ProAV Control Processor. New Data type for the IR subdevice - “Pronto Hex” is added. It allows you to configure the type of data used, IR.Hex or Pronto Hex.
- Virtual. Back copying of Commands and Feedbacks from the Virtual driver between projects is added. That will help you to create new projects based on old ones.
Panel project:
- Master Project. It is no longer possible to create a new master project, you can only edit previously created ones.
- Relations. Creation of a connection to the state of the Trend / Bar Chart / Pie Chart elements to avoid critical errors is removed.
- Automatic selection of a text field by transition with "Tab" is removed.
Web-panel (1.0.10.0)
Drivers:
- iRidium server. On the server web interface, in the iRidium server driver parameters, new counters “Virtual Channels”, “Virtual Tags”, “All channels” and “All Tags” is added. That will help to form an understanding of the number of tags in the project without returning to editing in iRidium Studio and quickly form an understanding of license costs.
05/03/2024 iRidium Setup 1.3.63.0.36872
Client (1.3.63.36872)
Features:
- When downloading a project from the cloud, the application interface is not blocked.
Drivers:
- Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added. link
- ITC. Driver for managing ITC conference system controllers is added. link
- AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added.
- MyHome. Command formation when using single digit numbers in A-PL settings is fixed. link
Mac OSx (1.3.63.36868)
- Window scaling bug in i3Pro application is fixed.
Server (1.3.63.36872)
Features:
- Ability to update iRidium Server application for the EU region is implemented.
- Web interface. A checkbox for disabling SSH access to the device on iRidi hardware platforms. link
- Web interface. The page header now displays the current OS version and microcontroller firmware on ProAV Control Processor Basic and ProAV Control Processor Advanced devices.
Drivers:
- Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added. link
- ITC. Driver for managing ITC conference system controllers is added. link
- AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added.
- MyHome. Command formation when using single digit numbers in A-PL settings is fixed. link
- KNX Router (KNXnet/IP) / Serial. The "KNX IP Gateway" setting to enable KNX gateway mode (to replace the script) on platforms: HSS, AV Processor and UMC.
- AV & Custom System (Serial). Added Delimiter, Packet length, Interval time settings for filtering and shaping of incoming data. link
Offline licensing:
- Changes have been made within the framework of information security: the ability to use Transfer has been disabled, unnecessary HTTP traffic has been excluded.
Studio (2.0.48.36872)
- FBD: For Logic AND, Logic OR, Bin AND, Bin OR blocks, the number of inputs/outputs is expanded to 16.
- FBD: "Interlock" and "Multiple NOT" blocks with the ability to create up to 16 inputs and outputs is added.
Features:
- The list of prohibited characters for use in names is expanded. Slash symbol '/' is added.
Drivers:
- Visca Over IP. Driver for controlling cameras using the "Visca over IP" protocol is added. link
- ITC. Driver for managing ITC conference system controllers is added. link
- AV & Custom System (WebSocket). SendText script method that allows to send user data in various formats to the driver is added.
- MyHome. Command formation when using single digit numbers in A-PL settings is fixed. link
07/02/2024 iRidium Setup 1.3.62.0.36281
Client (1.3.62.36281)
- Navigation and interaction with items in the project interface with the help of hotkey combination on Windows are improved.
- The system of project autoupdate from the cloud is improved: a notification popup about the new version of the project, a window with the update progress and a notification window about completion of the update are added. link
Drivers:
- AVCiT. The ability to select video codec when switching a video signal source is added. link
- Bus77. Thermostat. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetState and ThState = State, SetStatePID and ThStatePID = StatePID.
- Bus77. Blinds. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetPosition = Position.
- KNX Router Serial. The "ACK all telegrams" parameter for turning on the ACK response function from the server to all incoming telegrams from the KNX bus is added. link
- Domintell. Support of the "DIN10V02" analog input module subdevice is added.
- Yealink. Support of the driver to control "Yealink meeting eye 600" is added. link
- Yeelight. Support of the driver to control "Yeelight Pro S20 Mesh" is added. link
Android (1.3.62:36245)
- Support of navigation and interaction with items in the project interface using hardware keys of the AV-R device is added.
- The ability to intercept keystrokes on the AV-R device for use in a project is implemented.
System menu:
- The setting of turning on/off the "Lift to wake" function is added for the AV-R device, this function controls automatic unlocking the device when it is picked up.
Server (1.3.62.36281)
- AV Processor PX-VP100 (Advanced). The ability to scan devices from both Bus77 buses in iRidium Studio is added.
- Support of Cyrillic characters in the path to the server documents folder, which could lead to the impossibility of starting the server is added.
- The ability to use server events for tracking sunrise and sunset in scripts and project tokens is added.
- The frequency of launching schedules on the server, which could lead to the schedule being disabled is fixed.
Drivers:
- AVCiT. The ability to select video codec when switching a video signal source is added. link
- Bus77. Thermostat. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetState and ThState = State, SetStatePID and ThStatePID = StatePID.
- Bus77. Blinds. Commands and feedbacks of the driver are renamed for convenient setting in a panel project: SetPosition = Position.
- KNX Router Serial. The "ACK all telegrams" parameter for turning on the ACK response function from the server to all incoming telegrams from the KNX bus is added. link
- Domintell. Support of the "DIN10V02" analog input module subdevice is added.
- Yealink. Support of the driver to control "Yealink meeting eye 600" is added. link
- Yeelight. Support of the driver to control "Yeelight Pro S20 Mesh" is added. link
Studio (2.0.47.36281)
- Universal import. Setting of Comunity control channel when importing SNMP driver is added.
Drivers:
- Network drivers. The FullName parameter in the settings of control channels and feedback channels, displaying the full name of the channel with subdevices is added.
JavaScript editor:
- Setting of the external script editor is moved to the Script tab in the iRidium Studio settings.
- Search for all scripts, including closed, case-insensitive ones is implemented.
- System of group password protection/removal of scripts is implemented.
Panel project:
- When changing the coordinates of a group of graphic items, relative positions between them are saved.
Server project:
- The SunRise and SunSet tokens with the help of which you can get the time of sunrise and sunset for the current coordinates are added.
- Routines. Adding a new condition or action below the highlighted line, not at the end of the block.
- Scheme editor. The ability to select the String data type in the IF(SEL) block is added.
Bus77 project:
- The ability to scan both Bus77 lines connected to one AV Processor PX-VP100 (Advanced) is added.
- Valve. The "Tap controlled contacts" setting is added.
- Curtains/shutters. The "Stop" button and the "Control is blocked" state are added.
- Light sensor. After reflashing the device, the calibration value of the sensor is restored.
22/12/2023 iRidium Setup 1.3.61.0.35556
Studio (2.0.46.35556)
15/12/2023 iRidium Setup 1.3.61.0.35551
Client i3 Pro (1.3.61.35551)
13/12/2023 iRidium Setup 1.3.60.0.35545
Studio (2.0.46.35545)
Drivers:
- HDL Buspro Network. The Dry Contact 51Z subdevice is added. link
- Import from CSV files. At the next import settings of the channels which are already added will be renewed if the names of the channels are the same.
Panel project:
- The tool for adapting images to the item size to remove "the ladder" when showing in i3 Pro is added.
- Workspace. Switching to the «Hand» (dragging) mode with the help of the «Spacebar» hot key is added. link
- Highlighting the content of the box when navigating in Tab in the tabs of item properties, commands and drivers is added.
- The remote control «AV-R» when selecting the project resolution is added.
- An image can be dragged from Gallery without highlighting it first.
- Static list. The following settings are added: HIT, ScrollBar (deactivation of scrolling the list of popups), End Indent (space from the bottom edge to the last popup).
Server project:
- The «DB» tab is added for summary analysis of all tags written in the database.
JS editor:
- Editor workspace focus retention when switching between multiple projects is added.
- Ability to download several ready-made JS files simultaneously is added.
Bus77 project:
- CO2 Sensor. Ability to configure the connection “When the CO2 norm is exceeded” with relays and binary indicators is added.
- Dimmer. Ability to create an On/Off dimmer connection with a master button is added.
- Thermostat. Settings for upper and lower temperature limits for modes is added.
- Restoring device mechanism configuration in case of unsuccessful firmware and after resetting the device updated.
- Сolor contrast between online and offline devices for easier identification increased.
- Sorting in the device tree occurs by the channel number on the device, and not alphabetically.
- The “+” button for adding events is no longer hidden, when changing the width of the “Connections” tab.
- Update of the gateway IP address in the project after clicking on the “Find device” button is added.
Client i3 Pro (1.3.60.35545)
- For the debugging convenience messages about the end of the license validity period is shown not more frequently than once in a second.
Graphic items:
- ITEM_PICKER. The Position parameter is added. It enables receipt of the current position of the first visual item of the drum. link
Drivers:
- HDL Buspro Network. Codes for controlling the light temperature when working with the HDL/DALI gateway are added. link
- Kramer 3000. Support of the driver is implemented. link
- Lutron Homeworks QS. The OUTPUT link and HVAC link commands are added.
- MyHome Network (Beta). The range of values for A and Pl parameters is extended which widens the range of control devices. link
- SIP. The Preview status is added when using the Preview Mode. link
- URRI. Support of the driver is implemented. link
- HTTP. Digest authentication is improved: support of "qop" is added.
JavaScript:
- In the IR.HideAllPopup() method you can inicate the animation you want to use when closing a group of popups. link
- Functionality of the IR.IsModuleLicensed() method is extended to check if there is support of the AV&Custom System driver in the license when implementing custom drivers on the basis of AV&Custom System. link
Server (1.3.60.35545)
Drivers:
- Google home. Support of the Curtain subdevice is added. link
- HDL Buspro Network. Codes for controlling the light temperature when working with the HDL/DALI gateway are added. link
- Kramer 3000. Support of the driver is implemented. link
- Legrand Netatmo. Support of the driver is implemented. link
- Lutron Homeworks QS. The OUTPUT link and HVAC link commands are added.
- MyHome Network (Beta). The range of values for A and Pl parameters is extended which widens the range of control devices. link
- URRI. Support of the driver is implemented. link
- Yandex Alice Platform. Possibility to stop the curtains with the comand «Pause the curtains» and the «Pause» feedback channel for monitoring the curtains are added. link
- ZONT. Support of the driver is implemented. link
- HTTP.Enhanced Digest Authentication has been implemented, with support for the qop parameter.
18/10/2023 iRidium Setup 1.3.59.0.34184
Client (1.3.59.34184)
Licensing:
- The possibility to select Offline licence mode for objects without internet access is added. link
Server (1.3.59.34184)
Licensing:
- Licensing. The possibility to select Offline licence mode for objects without internet access is added. link
Web-interface:
- The possibility to select a local file to update the server if the link update is not available is added. link
Offline licensing:
- The possibility to deactivate the server via the web-interface is added. link
- The delay mechanism between attempts to enter PIN and PUK codes to prevent quick blocking of the web-interface as a result of unsuccessful attempts is added. link
11/10/2023 iRidium Setup 1.3.58.0.33856
iRidium Studio 2019 (2.0.43.33856)
Bus77 project:
- Assignment of individual device identifiers (LIDs) during scanning is fixed.
26/09/2023 iRidium Setup 1.3.58.0.33844
iRidium Studio 2019 (2.0.43.33844)
Drivers:
- Displaying of parameters of Modbus Network driver is fixed.
21/09/2023 iRidium Setup 1.3.58.0.33839
iRidium Studio 2019 (2.0.43.33839)
Bus77 project:
- The setting for calibration of the Leak Sensor is added. link
18/09/2023 iRidium Setup 1.3.58.0.33811
iRidium Studio 2019 (2.0.43.33811)
Drivers:
- AV & Custom Systems. Ability to copy and paste commands and feedback between AV drivers is added.
- BlueSound. Additional index parameter for inputs is added. link
- Bus77 Network. Saving Bus77 driver parameters when synchronizing with the Bus77 project is implemented.
- HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added. link
- Helvar NET. Ability to create a driver from a CSV file uploaded from the Designer application is added. link
Panel project:
- When you select a page or popup in the Projects tree, all commands and feedbacks used on them in the Devices tree are highlighted. link
- Alignment of elements relative to one element / group of elements, selected last with Ctrl (requires enabling in settings) is added. link
- Ability to select preset project resolutions for iRidi panels (P6, P8, P10) is added.
Server project:
- Routines. Saving the width of the columns inside the Routine between openings is added.
- Routines. Bus77 Network. Ability to use the events of the Bus77 driver in conditions is added (for example, by double tapping Bus77 button, turn on KNX lamp). link
Bus77 project:
- Support for customizing the HSV indicator (RASIM and COURTIER devices) is added. link
- Arrows for moving Bus77 devices to change the sorting of devices in the tree is added.
- By default, the Device tree in the "Connections and Logic" tab and in the "Connections" window is collapsed to the device level.
- The Studio stops polling the Bus77 bus when switching to another project.
- Thermostat. Manual selection of the "Error" mode is blocked, now it will only appear with a real error from the device.
- FM-808. The behavior at start can be either «On» or «Off» only.
- Global scenes. Minor changes are made.
Client (1.3.58.33811)
Drivers:
- HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added. link
Items:
- Editbox. The error of showing the cursor on the wrong (not highlighted) line is fixed.
Server (1.3.58.33811)
Drivers:
- BlueSound. The parameter of setting up commands for selecting the number of the input on the device (Index) is added. link
- HDL Buspro. Support of the Set Point Temperature parameter in Operation Code - AC Control is added. link
- Yandex Alice Platform. The support of the "Alice for Hotels" add-on enabling binding of up to 25 different accounts to 1 server project is added. link
Web interface:
- The Connect / Disconnect button for drivers in the "Drivers" tab is added. link
- The possibility to update the iRidium Server application by the redirect link from the iRidi web site is added.
22/08/2023 iRidium Setup 1.3.57.0.33241
iRidium Studio 2019 (2.0.42.33241)
- Support of ProAV Control Processor (PX-VP100-Advanced) is added. link
- Bus77 Network driver. The Keep alive parameter which sets the frequency of checking the connection with the gateway is added. link
Client (1.3.57.33241)
- Support of ProAV Control Processor (PX-VP100-Advanced) is added. link
Server (1.3.57.33241)
- Support of ProAV Control Processor (PX-VP100-Advanced) is added. link
- Bus77 Network driver. The Keep alive parameter which sets the frequency of checking the connection with the gateway is added. link
17/07/2023 iRidium Setup 1.3.56.0.33144
iRidium Studio 2019 (2.0.41.33144)
- Bus77 project. The "Make Brighter/Darker from 1 Button" link for Dimmers and DALI Dimmers is added. link
- Server project. An option is added to quickly configure drivers using Serial protocol on iRidi equipment. link
- Server project. Routines. Saving of column widths when editing rules is added.
- Drivers. The "AVCiT" driver is added. link
- Drivers. The "BSS Harman" driver is added. link
Client (1.3.56.33144)
- Drivers. Support of the "AVCiT" driver is added. link
- Drivers. Support of the "BSS Harman" driver is added. link
Android (1.3.56.33117)
- Touch Panel P6. Support of the panel is added.
- Touch Panel P6 P8 P10. An option is added to change project orientation from system menu.
Server (1.3.56.33144)
- Drivers. Support of the "AVCiT" driver is added. link
- Drivers. Support of the "BSS Harman" driver is added. link
- Drivers. Support of the "ProAV Control Processor" driver is added. link
- Support of the AV Processor PX-VM20-Basic device is added. link
- Drivers. AV&Custom System (Serial). Support of the "HRDW Flow Control" for RS-232 on the AV Processor PX-VM20-Basic device is added. link
- Drivers. Yandex Alice Platform. An option is added to edit the device track range in "Media" devices is added. link
20/06/2023 iRidium Setup 1.3.55.0.32640
iRidium Studio 2019 (2.0.40.32640)
- Drivers. The Somfy driver is added. link
- Drivers. Lutron QS Beta. The Set Current Temperature (°C) command is added. link
- Panel project. The ability to move the workspace left-right with the touchpad is added.
- Server project. Routines. The saving of the position of the Delay macro in the Then field is fixed.
- Script Editor. The highlighting of paired brackets after the "/" symbol is fixed.
- Bus77 project. I-CAN-DALI. The ability to set up connections for groups, without any devices in them yet, is added. link
- Bus77 project. I-CAN-DALI. The Blink parameter logic is changed. link
- Bus77 project. I-CAN-DALI. The support of DT8 subdevices is added: TW, RGB, RGBW. link
- Bus77 project. The schedule settings window for Thermostat, Blinds, Relay is added.
- Bus77 project. The option to indicate minutes and seconds for the «Shutdown delay» setting of the Movement sensor is added.
- Bus77 project. The Bus77 mechanism for scanning the bus is improved.
- Bus77 project. The Date and time column is added to the Firmware window, firmware is sorted by date and organized by firmware profiles.
Client (1.3.55.32640)
- Drivers. Lutron QS Beta. Support of the "Set Current Temperature (°C)" command is added. link
- Drivers. BACNet. The "SetSubDeviceParam" and "GetSubDeviceParam" script methods are added. link
- Drivers. Bus77. Support of the CAN-DALI gateway is added: DT8 control: TW, RGB, RGBW. link
Server (1.3.55.32640)
- Drivers. Lutron QS Beta. Support of the Set Current Temperature (°C) command is added. link
- Drivers. BACNet. The SetSubDeviceParam and GetSubDeviceParam script methods are added. link
- Drivers. Support of the Somfy driver is added. link
- Drivers. Bus77. Support of the CAN-DALI gateway is added: DT8 control: TW, RGB, RGBW. link
- Drivers. Bus77. Support of the CAN-DALI gateway is added: display of device and lamp errors. link
- Drivers. Yandex Alice Platform. Improvements of the service to use sensors in Alice scenes.
- Database. The ability to activate the automatic cleaning of the database is added. link
03/04/2023 iRidium Setup 1.3.54.0.31549
iRidium Studio 2019 (2.0.39.31549)
- Panel project. Work with a group of items. Attaching items to guidepath and moving items when holding on any point within the highlighted area. link
- Panel project. Routines. New macros are added: Edit routine settings (to edit without showing the whole list of routines), Show list of all routines (available for editing). link
- Server project. Routines. Search by routines is added.
- Server project. Routines. General properties for the «Edit from panel» and «Active on server» routines are added.
- Panel and server projects. Fast jumping to a device in the Bus77 project from the projects which are related to the device by using the RMB. link
- Bus77 project. Support of the CAN-DALI gateway is added: setting up and control of LED dimmers and groups. link
- Bus77 project. Support of subdevices is added: Current sensor, Resistance sensor, Voltage sensor, Voltage regulation. link
- Bus77 project. Movement sensor. Support of minutes (old firmware versions) and seconds (new firmware versions) for the «Shutdown delay» setting is added. link
- Bus77 project. Movement sensor. Sections are added in the «States» settings: «State for lighting», «Value».
Client (1.3.54.31549)
- Drivers. Support of the Vinteo driver is added. link
- Drivers. Support of the iEAST driver is added. link
- Routines. New macros are added: Edit routine settings (to edit without showing the whole list of routines), Show list of all routines (available for editing).
Android (1.3.54.31501)
- Support Touch Panel P8 is added. link
Server (1.3.54.31549)
- Drivers. Support of the Vinteo driver is added. link
- Drivers. Support of the iEAST driver is added. link
- Drivers. Yandex Alice Platform. Possibility to use sensors in Alice scenes is added. link
14/02/2023 iRidium Setup 1.3.53.0.30825
iRidium Studio 2019 (2.0.38.30825)
- Bus77 project. The «Relay» subdevice. The «Relay inversion» setting is added. link
- Bus77 project. The new «Voltage Control» subdevice is added. link
- Server project. Rules. The button for cancelling all changes in the «Rule» window is added. link
- Drivers. The WyreStorm driver is added. link
- Drivers. The Digibird driver is added. link
- Drivers. The AV & Custom Systems (SSH) driver is added. link
Client (1.3.53.30825)
- Drivers. Support of the WyreStorm driver is implemented. link
- Drivers. Support of the Digibird driver is implemented. link
- Drivers. Support of the AV & Custom Systems (SSH) driver is implemented. link
Server (1.3.53.30825)
- Drivers. Support of the WyreStorm driver is implemented. link
- Drivers. Support of the Digibird driver is implemented. link
- Drivers. Support of the AV & Custom Systems (SSH) driver is implemented. link
17/01/2023 iRidium Setup 1.3.52.1.30424
iRidium Studio 2019 (2.0.37.30424)
- Bus77 project. The "States" section for subdevices is added. It shows the current state and errors of subdevices. link
- Bus77 project. Possibility to calibrate the light sensor is added. link
- Bus77 project. Possibility to set up "Master-Slave" for motion sensor is added. link
- Bus77 project. List of commands and feedback channels for the "HSV dimmer" subdevice is changed. link
- Bus77 project. Automatic scanning of the line when creating a new project is added. link
30/11/2022 iRidium Setup 1.3.52.0.30278
iRidium Studio 2019 (2.0.36.30278)
- Bus77 Project. Displaying of «Report rate of the line» for gateways is added. link
- Bus77 Project. Support of Scenes is added. link
- Bus77 Project. Support of Global Scenes is added. link
- Bus77 Project. Support of the Scene Switch mode is added for the «Button» subdevice. link
- The list of functions in the prompter of the JS editor is expanded. link
- Possibility to copy all states of the item style via the RMB menu is added. link
- Possibility to move items in the project tree by the D&D method is added. link
Client (1.3.52.30278)
- Items. Advanced List. The "Stop by Tap" setup is added. link
- Drivers. Support of the "Televic Conference" driver is added. link
- Drivers. Support of the "SpinetiX" driver is added. link
- Drivers. Support of the "Satel Integra Network" driver is added. link
Server (1.3.52.30278)
- Drivers. Support of the "Televic Conference" driver is added. link
- Drivers. Support of the "SpinetiX" driver is added. link
- Drivers. Support of the "Satel Integra Network" driver is added. link
- Drivers. Z-Wave. Support of the "Aeotec WallMote" scene switch is added. link
15/11/2022 iRidium Setup 1.3.51.1.30061
iRidium Studio 2019 (2.0.35.30061)
- Bus77. DM-1400 support added. link
- Bus77. Thermostat. PID control mode support added. link
- Bus77. Line polling frequency for IS-CAN display added. link
Server (1.3.51.30061)
28/10/2022 iRidium Setup 1.3.51.0.29741
Client (1.3.51.29740)
Server (1.3.51.29740)
26/10/2022 iRidium Setup 1.3.50.0.29728
iRidium Studio 2019 (2.0.34.29728)
- Possibility to move (by D&D) "Project Token" to the "Relations" and "Command" sections of the "Programming" window is added. link
- Dynamic images. The "Disconnect when minimized" setting is added. link
Client (1.3.50.29728)
- Dynamic images. Support of the "Disconnect when minimized" setting is added. link
- Drivers. Support of the "Kramer VIA" driver is added. link
- Drivers. Support of the "Biamp Tesira" driver is added. link
- Drivers. Support of the "Novastar" driver is added. link
Server (1.3.50.29728)
- Drivers. Support of the "Kramer VIA" driver is added. link
- Drivers. Support of the "Biamp Tesira" driver is added. link
- Drivers. Support of the "Novastar" driver is added. link
05/10/2022 iRidium Setup 1.3.48.0.29463
Client (1.3.48.29495)
- The problem with UDP Broadcast on iOS 16 is fixed.
15/09/2022 iRidium Setup 1.3.47.1.29461
iRidium Studio 2019 (2.0.33.29461)
- Bus77 project and driver. Support of subdevices is added: link
- Curtains/Shutters;
- HSV dimmer;
- Pressure sensor;
- VOC sensor;
- Noise sensor;
- Diode.
- Bus77 project. Support of the Master button mode is added for Button.
- JS. Icons for statuses in pasword-protected scripts are added.
- Support of HDL MDT06015.533;HDL-MC64-DALI.431 is added.
02/09/2022 iRidium Setup 1.3.47.0.29357
Client (1.3.47.29357)
Server (1.3.47.29357)
26/08/2022 iRidium Setup 1.3.46.0.29323
iRidium Studio 2019 (2.0.32.29323)
Client (1.3.46.29323)
Server (1.3.46.29323)
24/08/2022 iRidium Setup 1.3.45.0.29317
iRidium Studio 2019 (2.0.31.29317)
- Drivers. KNX Router (KNXnet/IP) / Serial (UMC). The new subtype for channels is added - ‘7.600 Absolute colour temperature’.
- Possibility to create ‘Bus77’ projects is added. link
Client (1.3.45.29317)
- PJLink. Volume control is added. link
- Drivers. Support of the ‘Panasonic PTZ’ driver is added. link
Server (1.3.45.29317)
- PJLink. Volume control is added. link
- Drivers. Support of the ‘Panasonic PTZ’ driver is added. link
- Sber Salut. The following subdevices are added: link
- Radiator/heater;
- Floor heating;
- LED strip;
- Opening sensor;
- Motion sensor;
- Relay;
- Temperature and humidity sensor;
- Blinds/Shutters;
- Curtains;
- Fan;
- Scene switch.
- Licence. Support of local licensing of projects is added.
27/06/2022 iRidium Setup 1.3.44.0.28482
iRidium Studio 2019 (2.0.30.28482)
- Import. The "Bus77 Project import" is added. link
Client (1.3.44.28482)
- Drivers. Support of the "Bus77" driver is added. link
Server (1.3.44.28482)
- Drivers. Support of the "Bus77" driver is added. link
20/06/2022 iRidium Setup 1.3.43.0.27870
iRidium Studio 2019 (2.0.29.27870)
- Schemes. The "Sel" block-scheme is added. link
- Setup of processing for the "\n\r" line break symbols is added in the Text property of an item. link
- Possibility to change the item size for the size of an image on it is added. link
Client (1.3.43.27870)
- Drivers. Support of the "Lutron QSX" driver is added. link
- Drivers. "Z-Wave.Me". Support of work by the remote token. link
- Drivers. Helvar. Support of feedback channels is added: Query Device Is Disabled, Query Lamp Failure, Query Device Is Failure, Query Device Is Missing. link
Server (1.3.43.27870)
- Drivers. Support of the "Lutron QSX" driver is added. link
- Drivers. "Z-Wave.Me". Support of work by the remote token. link
- Drivers. Helvar. Support of feedback channels is added: Query Device Is Disabled, Query Lamp Failure, Query Device Is Failure, Query Device Is Missing. link
03/06/2022 iRidium Setup 1.3.42.0.27748
Client (1.3.42.27748)
Server (1.3.42.27748)
31/05/2022 iRidium Setup 1.3.41.0.27738
Client (1.3.41.27738)
Server (1.3.41.27738)
17/05/2022 iRidium Setup 1.3.40.0.27726
iRidium Studio 2019 (2.0.28.27726)
- Possibility to copy the Virtual driver between the projects is added. link
- The window for setting up the Advanced List item is modified. link
- Possibility to change the size of a group of items is added. link
Client (1.3.40.27726)
- The "Cancel download" button is added when downloading projects from the cloud. link
- Support of "ETS Remote" is added. link
- Support of the Z-Wave.Me driver is added. link
- Fixing bugs.
Server (1.3.40.27726)
- Support of "ETS Remote" is added. link
- Support of the Z-Wave.Me driver is added. link
- Fixing bugs.
13/04/2022 iRidium Setup 1.3.39.0.27478
iRidium Studio 2019 (2.0.27.27478)
- Drivers. Ajax Network.Support of new subdevices is added. link
- Drivers. Yandex Alice Platform. Support of new subdevices is added. link
- Setting up of the template for text displaying on the Button item at D&D [Command, Feedback,Token] in the workspace of the panel project is added. link
- Opening of the server project from the menu of the panel project tab is added. link
- A new way of project scaling to display the "Page;Popup" items in the workspace is added. (ZoomToFit). link
- The hot keys Ctrl+ (+/-/0) for changing the project scaling are added. link
- The button for activating the window for creating animation from the General tab of the popup is added. link
- The window for selecting several popups to be displayed on the page is added. link
- The window of popup selection for the "Static List" item is modified. link
Client (1.3.39.27478)
Server (1.3.39.27478)
- Drivers. Ajax Network.Support of new subdevices is added. link
- Drivers. Yandex Alice Platform. Support of new subdevices is added. link
01/04/2022 iRidium Setup 1.3.38.0.27261
Client (1.3.38.27261)
Server (1.3.38.27261)
28/03/2022 iRidium Setup 1.3.37.0.27254
Client (1.3.37.27254)
Server (1.3.37.27254)
21/02/2022 iRidium Setup 1.3.36.0.27163
iRidium Studio 2019 (2.0.26.27163)
- Support of Drag&Drop for feedbacks from the Devices tree to the Relations area (the Programming window) is added. link
- The "Hand" tool for moving the working area of the panel project is added. link
- Highlighting of group addresses when importing from the ETS project ( "by the building structure" like in the ETS Import panel) is added. link
- Drivers. Support of the "Philips Dynalite" driver is added. link
- Serbian language is added.
Client (1.3.36.27163)
- Items. EditBox. Possibility of text highlighting and operations "Cut","Copy" and "Delete" are added.
- Drivers. Support of the "Philips Dynalite" driver is added. link
Server (1.3.36.27163)
- Drivers. Support of the "Philips Dynalite" driver is added. link
- Drivers. Sber Salut. Support of the HVAC subdevice is added link (Only russian). link
10/12/2021 iRidium Setup 1.3.35.0.26916
iRidium Studio 2019 (2.0.25.26916)
Client (1.3.35.26916)
Server (1.3.35.26916)
6/12/2021 iRidium Setup 1.3.34.0.26848
iRidium Studio 2019 (2.0.24.26834)
- Saving of the scaling for displaying a project in Studio is added for each project separately.
- The "Delete, All relation and command" function is available via "RMB" for groups of graphic items.
- Support of fractional spacing for fonts is available. link
- Support of indents for texts in items is available. link
- Possibility to use "Forward value to" for driver tokens is added.
Client (1.3.34.26834)
- Drivers. BACNet Network. Mode selection for update of variables is added. link
Server (1.3.34.26838)
- Drivers. Support of the "Sber Salut" voice assistant is added (Only russian). link
- Drivers. Support of the "Mail Marusya" voice assistant is added (Only russian). link
- Drivers. Support of the "Ajax Network" driver is added. link
- Linux. Support of NVMe discs is added.
- Drivers. BACNet Network. Mode selection for update of variables is added. link
- Support of Raspberry Pi 4 Model B is added. link
25/10/2021 iRidium Setup 1.3.33.0.26283
iRidium Studio 2019 (2.0.23.26283)
- Items. Tokens filled, empty are added for level, circular level, multistate level, multistate circular level items. link
- Items. Support of switching the item states on the Projects panel (the States tab) is added. link
- Items. The template for outputting fractional values ($F,1..$F,5) is added, so that the separator character of the fractional part is a comma. link
- Items. The default behaviour of the Up/Down button item is changed (without без built-in connections). link
- JS editor. Text search by closed scripts (not only by open ones) is added.
- JS editor. Possibility to scroll the script window below the last text line (like in Visual Studio) is added.
- JS editor. Tabulation setup is added. link
- Schemes. Auto creation of the scheme template when dragging a scheme block to an empty workspace is added. link
- Schemes. Possibility to select the number of outputs for the "Duplicate" block is added. link
- System tokens. Application. The “Clear Project Tokens” token is added (available for writing only). link
- Possibility to paste images from the exchange buffer to the workspace and project resources is added. link
- Support of proportional scaling when importing a vector based image is added. link
- Possibility to move the page across the workspace to work in negative coordinates is added. link
- Possibility to copy all auxiliary guiding lines form one page to another is added. link
- Possibility of multiple selection and moving popups with Ctrl/Shift in the editor of the popup groups is added. link
Client (1.3.33.26283)
- Drivers. TIS Network. Support of new subdevices is added: Media control, Thermostat, Logic 4T sensor, Logic Health sensor, Logic PIR sensor, Logic 10F sensor, Digital input, Floor Heating, Universal Switch Project, Universal Switch DVD, Universal Switch IPTV, Universal Switch TV Box, Universal Switch TV, RGB. link
- Drivers. Tion Network. Support of the "Zone sensor" subdevice is added + minor improvements. link
- Drivers. Support of the "Onvif Network" driver is added. link
- Support of the “Clear Project Tokens” system token and the JS method IR.ClearProjectTokens() for resetting the current values to the default ones is added. link
Server (1.3.33.26283)
- Drivers. ZigBee. Support of "Danfos" equipment is added. link
- Drivers. ZigBee. Support of USB memory sticks is added: "Nortek HUSBZB-1", "Elelabs Zigbee USB Adapter", "DEFARO SprutStick Pro". link
31/08/2021 iRidium Setup 1.3.32.0.25676
iRidium Studio 2019 (2.0.22.25676)
- Universal import from JS. The ability to import virtual variables is added. link
- The ability to open the "Forward Value To - Object Selection" window by clicking "Enter" is added.
- Closing of tabs (scripts, projects) by the middle mouse button is added.
- Drivers. HDL Buspro Network. Operation codes for working with the Granit panel are added.
Client (1.3.32.25676)
- JavaScript. IR.CalculateHash. Support of the algorithms hmac_md5, hmac_sha1, hmac_sha256, hmac_sha384, hmac_sha512 is added. link
- JavaScript. Support for working with a byte array in the JS methods IR.Base64Encode and IR.Base64Decode is added. link
- Drivers. Domintell. Support of hardware (QG2; EV1; DX2; DPBC01; DPBC02; DPBC04; DPBC06) is added.
- Drivers. Domintell. The ability to adjust the delay between sent commands is added.
- Drivers. Crestron. Support of SSL authentication for processors 3 (with firmware 1.6+) and 4 series is added.
link
- Drivers. Crestron. The ability to send the Serial type commands with Unicode support for new types of connections is added. link
- Drivers. HDL Buspro Network. Support of Granit panel is added.
Server (1.3.32.25676)
- JavaScript. IR.CalculateHash. Support of the algorithms hmac_md5, hmac_sha1, hmac_sha256, hmac_sha384, hmac_sha512 is added. link
- JavaScript. Support for working with a byte array in the JS methods IR.Base64Encode and IR.Base64Decode is added. link
- Drivers. Domintell. Support of hardware (QG2; EV1; DX2; DPBC01; DPBC02; DPBC04; DPBC06) is added.
- Drivers. Domintell. The ability to adjust the delay between sent commands is added.
- Drivers. Crestron. Support of SSL authentication for processors 3 (with firmware 1.6+) and 4 series is added. link
- Drivers. Crestron. The ability to send the Serial type commands with Unicode support for new types of connections is added. link
- Drivers. ZigBee. Support of Xiaomi Aqara hardware is added. link
- Drivers. ZigBee. The support of Legrand Netatmo is added. link
- Drivers. HDL Buspro Network. Support of Granit panel is added.
07/07/2021 iRidium Setup 1.3.31.0.25286
iRidium Studio 2019 (2.0.21.25286)
- Drivers. iNels. GROUP DIGITAL control command is realized.
- Drivers. Intesis driver is added. link
- Drivers. TV LG WebOS driver is added. link
- Drivers. Support of KNX USB interface (KNX HID) is added. link
- A capability to change fonts in a whole project is added.
- A capability to turn on/off a group of scripts is added (JS editor).
- Display of individual addresses of BAOS devices in the synchronization menu of ETS with a project is added.
- Bugs fixes.
Client (1.3.31.25286)
- Drivers. iNels. GROUP DIGITAL control command is realized.
- Drivers. Intesis driver is added. link
- Drivers. TV LG WebOS driver is added. link
- Drivers. Support of KNX USB interface (KNX HID) is added. link
- Drivers. Bluesound. Processing the feedback of the Play event is added.
- Use of the HMAC SHA-256 encryption method is realized in scripts.
- Bugs fixes.
Server (1.3.31.25286)
- Drivers. iNels. GROUP DIGITAL control command is realized.
- Drivers. Intesis driver is added. link
- Drivers. TV LG WebOS driver is added. link
- Drivers. Support of KNX USB interface (KNX HID) is added. link
- Drivers. Bluesound. Processing the feedback of the Play event is added.
- Drivers. ModBus. Support of server monitoring of messages in the Modbus bus is added (Direct RS-485 and TCP connection).
- Use of the HMAC SHA-256 encryption method is realized in scripts.
- Bugs fixes.
Site
- Drivers. AMX. A capability to turn on/off "Single Beep" during import of TP4 projects via an account (web-interface) is added.
16/06/2021 iRidium Setup 1.3.30.0.24942
iRidium Studio 2019 (2.0.20.24942)
- Drivers. Samsung TV fixes
- Other non-critical fixes.
Client (1.3.30.24942)
- Drivers. Modbus fixes.
- Drivers. Samsung TV fixes.
- Other non-critical fixes.
Server (1.3.30.24942)
- Drivers. Правки Modbus.
- Drivers. Правки Samsung TV.
- Другие некритичные исправления.
31/05/2021 iRidium Setup 1.3.29.0.24874
iRidium Studio 2019 (2.0.19.24874)
- Drivers. HDL Buspro Network. Support of commands containing Operation code - "Floor Heating Control (DLP)" for the "Enviro" panel is added. link
- Drivers. Support of the "Wake-on-LAN" driver is added. link
- Drivers. Support of the "EIDE" driver is added. link
- Drivers. Support of the "Xicato" driver (to control equipment via the IP gate) is added. link
- Drivers. Support of the "Bluesound" driver is added. link
- Drivers. Larnitech. Support of the "CO2 sensor" is added. link
- Items. Advanced List. Added ScrollBar display settings.
- Import.Crestron. Added a checkbox to control the nesting parameter for commands and feedbacks during import.
Client (1.3.29.24874)
- Drivers. HDL Buspro Network. Support of commands containing Operation code - "Floor Heating Control (DLP)" for the "Enviro" panel is added. link
- Drivers. Support of the "Wake-on-LAN" driver is added. link
- Drivers. Support of the "EIDE" driver is added. link
- Drivers. Support of the "Xicato" driver (to control equipment via the IP gate) is added. link
- Drivers. Support of the "Bluesound" driver is added. link
- Drivers. Yamaha Network. Minor improvements are made after testing the drive on models "Yamaha WX-021" и "WX-051".
- Drivers. Helvar. Support of decimal values for the "Direct Level Group" & "Direct Level Device" commands is added.
- Drivers. Larnitech. Support of the "CO2 sensor" is added. link
Server (1.3.29.24874)
- Drivers. HDL Buspro Network. Support of commands containing Operation code - "Floor Heating Control (DLP)" for the "Enviro" panel is added. link
- Drivers. Support of the "Wake-on-LAN" driver is added. link
- Drivers. Support of the "EIDE" driver is added. link
- Drivers. Support of the "Xicato" driver (to control equipment via the IP gate) is added. link
- Drivers. Support of the "Bluesound" driver is added. link
- Drivers. Yamaha Network. Minor improvements are made after testing the drive on models "Yamaha WX-021" и "WX-051".
- Drivers. Helvar. Support of decimal values for the "Direct Level Group" & "Direct Level Device" commands is added.
- Drivers. Larnitech. Support of the "CO2 sensor" is added. link
Site
- The "Strizh" JS module is added. link
11/05/2021 iRidium Setup 1.3.28.0.24432
iRidium Studio 2019 (2.0.18.24432)
- Drivers. The "PJLink" driver is added. link
- Bugs fixes.
Client (1.3.28.24432)
- Drivers. Support of "PJLink" driver is added. link
- Launch speed of i3Pro app is increased.
- Bugs fixes.
Server (1.3.28.24432)
- Drivers. Support of "PJLink" driver is added. link
- Bugs fixes.
14/04/2021 iRidium Setup 1.3.27.0.24322
iRidium Studio 2019 (2.0.17.24322)
- Localization for French language in the studio interface is updated.
- Drivers. The "Amazon Alexa (v3) Network" driver is added. link
- Yandex Alice Platform. Added commands:
- "Humidity" for the "Thermostat" and "Conditioner" subdevices; link
- "TemperatureCelsius" for the "Air humidifier" subdevice; link
- "Range" for the "Blinds" subdevice; link
- The RGB channel is removed from the "Lamp" device. The new "RGB lamp" subdevice is added. link
- KNX. The subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added. link
- Drivers. The "Samsung TV" driver for R/Q series is added. link
Client (1.3.27.24320)
- KNX. Support of subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added. link
- Drivers. Support of the “Samsung TV” driver for R/Q series is added. link
- SIP. The "Automatic gain control" setting is added. link
Server (1.3.27.24320)
- Drivers. Support of the “Amazon Alexa (v3) Network” driver is added. link
- Voice assistants (YandexAlice,GH,Alexa). Possibility to work via the new skill - “iRidium Assistant” - is added.
- Yandex Alice Platform. Added commands:
- "Humidity" for the "Thermostat" and "Conditioner" subdevices; link
- "TemperatureCelsius" for the "Air humidifier" subdevice; link
- "Range" for the "Blinds" subdevice; link
- The RGB channel is removed from the "Lamp" device. The new "RGB lamp" subdevice is added. link
- KNX. The subtypes for group addresses 229.001, 251.600, 232.600, 5.100 is added. link
- Drivers. The "Samsung TV" driver for R/Q series is added. link
22/03/2021 iRidium Setup 1.3.26.0.24029
iRidium Studio 2019 (2.0.16.24029)
- Driver. Yandex Alice Platform. The "Use name" parameter for subdevices is added. link
- The native Yamaha driver is added. link
- Auxiliary guides for aligning elements are added. link
- Opening of the Dropdown menu by presssing "RMB" is added for the tools "Draw","Item Position","Align","Spacing","Text align","Grid".
Client (1.3.26.24029)
- iOS. Support of Face ID is added. link
- Drivers. Support of Yamaha driver is added. link
- JS. Possibility to activate/deactivate the proximity sensor on iOS and Android devices is added. link
- Drivers. Larnitech. Speed of the driver work is increased.
Server (1.3.26.24029)
- Drivers. Support of Yamaha driver is added. link
- Drivers. Yandex Alice Platform. Support of the "Device name" parameter for subdevices is added. link
- JS. Possibility to connect the Amazon Alexa voice assistant to an iRidium project via scripts is added. link
- Drivers. Larnitech. Speed of the driver work is increased.
8/02/2021 iRidium Setup 1.3.25.0.23568
iRidium Studio 2019 (2.0.15.23568)
- Support of user databases from the old studio versions (.*irdb) is improved - Display of folders for serials of devices is added.
- Possibility to set up editable server routines is added. link
- The "TextArea" item is added. link
- Possibility to select addresses from the panel of ETS import (for data synchronization) is added. link
- The "indent" property is added for "Static List". link
- Possibility to transfer sounds from one project to another is added. link
- Camera can be selected in the item properties in the "Image" field now.
Client (1.3.25.23561)
- Drivers. AV&Custom systems (HTTP). Possibility to send the "DELETE" and "PATCH" type requests is added.
- Drivers. BacNet Network. Possibility to setup time of re-subscribing the driver. link
- Drivers. HDL Buspro Network. Support of Operation code: Read Status of Channels (DALI) is added.
- Possibility to edit server routines from the panel project is added. link
Server (1.3.25.23561)
- Drivers. AV&Custom systems (HTTP). Possibility to send the "DELETE" and "PATCH" type requests is added.
- Drivers. BacNet Network. Possibility to setup time of re-subscribing the driver. link
- Drivers. HDL Buspro Network. Support of Operation code: Read Status of Channels (DALI) is added.
14/12/2020 iRidium Setup 1.3.24.1.22973
iRidium Studio 2019 (2.0.14.22973)
- Added the ability to select scripts to transfer to a server project when creating it based on a panel project.
- Added automatic setting of the "send value by hold" value to the "send value by" property of the "trigger button" element when using the "hold" event.
- Added the ability to disable rulers in schemes.
- Added the ability to choose to add / not add Single Beep sound when importing "TP4" project into the studio.
- Added the ability to adjust the step for the "Level" item.
- Added the ability to copy folders via the "RMB" context menu in the project tree.
- Added the ability to change the name of scripts with the "F2" key.
- Added hotkeys for "Copy Style State" and "Paste Style State".
- Added "RTL" support for Arabic.
- Added the ability to customize the "Pie Chart" from the editor (without knowing "JS").
- Improved the "Vertical Center Align" tool.
- Fixed "Scale to Fit" parameter for importing "(AMX) TP5" projects into studio.
- Added "Drag Drop" items inside the schedule window and the routine window.
- Added search for "ETS" import window.
25/11/2020 iRidium Setup 1.3.24.0.22733
iRidium Studio 2019 (2.0.13.22397)
- Drivers. The TION driver is added. link
- Drivers. AV&Custom System (HTTP). Capability to select Digest authentication in driver settings is added. link
- Drivers. Sonos. The "Sonos groups" driver is added to work with grouping players. link
Client (1.3.24.22733)
- Javascript. Support of methods for working with item animation is added. link
- Drivers. Sonos. Capability to work with grouping players is added. link
- Drivers. AV&Custom System (HTTP). Capability to work with Digest authentication is added. link
- Drivers. Support of the TION driver is added. link
- iRidium P7-PoE. Support of methods for side lighting control is added. link
Server (1.3.24.22733)
- Drivers. Sonos. Capability to work with grouping players is added. link
- Drivers. AV&Custom System (HTTP). Capability to work with Digest authentication is added. link
- Drivers. Support of the TION driver is added. link
11/11/2020 iRidium Setup 1.3.23.1.22386
iRidium Studio 2019 (2.0.13.22386)
- hotkeys Ctrl + C and Ctrl + V now work in the Project tree.
- events in the Programming window can now be minimized.
- when creating a Level item its Direction is selected automatically.
- the Close button (the cross) for dialog windows is added.
- the setting for indent size – Tab – is added in the script tools / options / script.
- errors in the Domintel scanner are fixed.
- the RMB menu for the schedule window is improved.
- names in the i/o window for schemes are displayed in short now for better readability.
- folders can be renamed in the global sound gallery now.
- sounds from the global gallery can be drag’n’dropped into scripts.
- popup size can be changed right after its unlocking now.
- the dialog window for command creating opens now when drag’n’dropping a command to the circular level.
- the horizontal scrolling by Shift + wheel is added in the script editor.
- the Min, Max properties of the Level item can now be used in relations.
- import of Beckhoff ADS is added.
- the color selection window is improved (now you can select brightness from the palette).
- the Text Effect Color property is added in Object Properties / States.
- the item properties are displayed in Object Properties now even when it is in a group.
- minor bugs and errors are fixed, minor ui bugs are fixed and overall stability is improved.
14/10/2020 iRidium Setup 1.3.23.0.22094
iRidium Studio 2019 (2.0.12.22094)
- Improved stability, fixed bugs.
- Improved GUI.
- FBD schemas can have a repetition interval of less than 1 second.
- Added new gallery of graphics items.
- Added hotkey Shift + F2 to insert text on all element states in the workspace.
- Fixed alignment tools.
- Improved compatibility with projects from the old version.
- Added folders to the script tree.
- Drivers. The Sonos native driver is added. link
- Drivers. HDL. New commands for IR emitters are added. link
- Drivers. KNX. The token of the poll status is added - TagUpdate. link
Client (1.3.23.22094)
- Drivers. Support of the Sonos native driver is added. link
- Win. Editbox. Highlighting of text with hot keys is added:
- Shift + Home to select all text before marker;
- Shift + End to select to select all text after marker;
- Shift + Left arrow to select one character before marker;
- Shift + Right arrow to select one character after marker.
- Drivers. HDL. Support of new commands for IR emitters is added. link
- Drivers. KNX. Support of token of the poll status is added - TagUpdate. link
Server (1.3.23.22094)
- Drivers. HDL. Support of new commands for IR emitters is added. link
- Drivers. KNX. Support of token of the poll status is added - TagUpdate. link
10/09/2020 iRidium Setup 1.3.22.0.21556
iRidium Studio 2019 (2.0.11.21556)
- Work of schemes is corrected.
- Corrections in Domintell scanner are made.
- Export and import of schemed are added.
- Support of devices with WebSocket protocol is added to Domintell scanner. link
- The set of block-schemes is widened.
- Changes in the design are made.
- Critical errors are corrected.
- Drivers. KNX. The "Read request"parameter is added to channel settings. link
- Drivers. The "AV & Custom Systems (WebSocket)" driver is added. link
- Drivers. The "Keep Alive" parameter is added for all TCP drivers. link
- Drivers. Domintell. The "WebSocket" type of protocol to work with DGQG04 module is added. link
Client (1.3.22.21554)
- Drivers. KNX. The "Read request"parameter is added to channel settings. link
- Drivers. The "AV & Custom Systems (WebSocket)" driver is added. link
- Drivers. The "Keep Alive" parameter is added for all TCP drivers. link
- Drivers. Domintell. Support of work with DGQG04 module is added. link
Server (1.3.22.21554)
- Drivers. Z-Wave. Support of "Fan Mode" and "Fan State" for termostate is added. link
- Drivers. KNX. Support the "Read request" parameter is added. link
- Drivers. Support of the "AV & Custom Systems (WebSocket)" driver is added. link
- Drivers. Support of the "Keep Alive" parameter is added for all TCP drivers. link
- Drivers. Domintell. Support of work with DGQG04 module is added. link
05/08/2020 iRidium Setup 1.3.20.1.21085
iRidium Studio 2019 (2.0.10.21085)
- Errors in import of Crestron driver are corrected.
- Drag'n'dropping commands between folders in the driver tree is corrected.
- Changes in design are made.
- Work with history is improved.
- Larnitech scanner is added.
- Support of user databases with *.db resolution is added.
16/07/2020 iRidium Setup 1.3.20.0.21001
13/07/2020 iRidium Setup 1.3.19.0.20956
Client (1.3.19.20956)
- Win. System Menu. Setting for changing client window orientation is added. link
- Bugs fixes.
06/07/2020 iRidium Setup 1.3.18.2.20923
iRidium Studio 2019 (2.0.9.20923)
- Import of names of BAOS datapoints is corrected.
- System of creating folders when importing EST projects is changed.
- Filling the Description field with a group address and a subtype of KNX channel is added.
- Capability to move folders between Global Caché devices is added.
- Changes in design are made.
- Stability is improved.
11/06/2020 iRidium Setup 1.3.18.1.20787
iRidium Studio 2019 (2.0.8.20787)
- Error in synchronization of a panel project with a server one is corrected.
- Saving projects in the gallery is corrected.
- SIP driver is added to a server project.
- Capability to turn off scripts is added.
- 1-Wire import is added
- Zigbee import is added.
- Support of projects from the old studio is improved.
- Work of the studio on Windows 7 is improved.
28/05/2020 iRidium Setup 1.3.18.0.20605
iRidium Studio 2019 (2.0.7.20635)
- Improved support of projects from old studio.
- Improved work of Forward value to.
- Improved work of Duotecno.
- Added feature to set a password for a script file.
- Added support of KNX projects from the new version of ETS.
- Changes in design.
- Improved stability of the studio.
Client(1.3.18.20605)
- JavaScript. The IR.OpenPhotoCamera() method to activate the system camera is added. link
- Javascript. The IR.DeleteImage() method to delete the camera created via scripts is added. link
- Drivers. The SIP driver is updated. Added: link
- work via the TCP protocol;
- possibility to redirect calls;
- the "Preview" mode before replying;
- the "Do not disturb" mode;
- improved sound processing.
- Dirvers. ControlArt 7Port. Possibility to send commands for Somfy is addded. link
- Drivers. AMX. The IRLB commands for working with items on lists is added. link
08/05/2020 iRidium Setup 1.3.16.3.20299
iRidium Studio 2019 (2.0.6.20299)
- Corrections in item resize when they are added from the gallery.
- Corrections in item resize when project resolution is changed.
- Support of KNX projects with a password is added.
- Date of last synchronization is added to ETS import.
- Moving folders with commands between channels of GC driver is added.
- Stability is improved.
20/04/2020 iRidium Setup 1.3.16.2.20204
iRidium Studio 2019 (2.0.5.20204)
- Deletion of connections when copying an item is corrected.
- Error in the work of Duotecno scanner is corrected.
- Error of sending wrong values to levels is corrected.
- Error at impulse creation is corrected.
- Display of item names in show usage commands is added.
- "Forward value to" feature is added. link
- Minor corrections in design are made.
06/04/2020 iRidium Setup 1.3.16.1.20039
Client(1.3.16.20039)
- Drivers. Support of the "ControlArt 7Port" driver is added. link
- JavaScript. Listeners for the beginning and the end of the KNX bus polling are added. link
- JavaScript. Listener for receiving a license by the client is added. link
- Drivers. SNMP. The "Interval between tag polls" and "Maximum number of tag polls" parameters are added. link
Server(1.3.16.20039)
- Drivers. Support of the "ControlArt 7Port" driver is added. link
- JavaScript. Listeners for the beginning and the end of the KNX bus polling are added. link
- JavaScript. Listener for receiving a license by the client is added. link
- Drivers. SNMP. The "Interval between tag polls" and "Maximum number of tag polls" parameters are added. link
iRidium Studio 2019 (2.0.4.20039)
- Errors in schemes are corrected.
- Errors during import are corrected.
- An error of creating a command with a delay is corrected.
- An error of copying a device into another subnet is corrected.
- Behavior of a dialogue to assign a command to an item is.
- ControlArt 7Port driver is added.
- New KNX import is added. link
- "None" is added to the landscape orientation of the Screensaver.
- Import of "xml" and "csv" files for BacNet is added. link
16.03.2020 iRidium Studio 2019 1.3.16.0
- Parsing of cameras from old projects is corrected.
- Tree of scripts is added.
- Changes in design.
- Improved stability.
02.03.2020 iRidium Studio 2019 1.3.15.0
- Display of level cursor is corrected.
- Bug in display of slider settings of circular levels is corrected.
- Search function is added to the list of manufacturers for Global Caché.
- Search function is added to dropdown lists.
- Changes in design.
18.02.2020 iRidium Studio 2019 1.3.12.2
- Wrong type of connection is corrected in 1-Wire driver.
- Project resolution is added to the name when importing from master project.
- Button to synchronize with a server project is added.
- Capability to change the color of item border is added.
- Stability is improved.
04.02.2020 iRidium Studio 2019 1.3.12.1
- Fixed tokens in folders.
- Fixed disabling items in tree.
- Fixed schemes with virtual tags and commands.
- Fixed import of Crestron driver.
- Improved support old projects.
- Added script update from external editor without requests.
20.01.2020 iRidium Studio 2019 1.3.12.0
- Fixed Clipsal driver.
- Fixed server on downloading projects with diagrams from the cloud.
- Fixed learning iTach devices.
- Added New blocks to schemes (Min, Max, Map).
- Added highlighting selected characters in script editor.
- Added Undo / Redo buttons to script editor.
- Added tooltips for feedback in charts editor.
- Added protected projects.
- Added the ability to hide items in the project tree.
- Improved old projects support.
- Improved studio stability.
- Improved studio design.
12.10.2019 iRidium Studio 2019 1.3.11.10
- Fixed import of ETS.
- Pop-up groups editor can showed as dialog.
- Improved Script editor.
- Improved Design.
25.11.2019 iRidium Studio 2019 1.3.11.9
- Fixed detect names by the HDL scanner.
- Fixed Yandex Alice Platform driver.
- Fixed save projects on network storage.
- Added of macros gallery.
- Improved optimization.
11.11.2019 iRidium Studio 2019 1.3.11.8
- HDL Scanner can scan with several network cards.
- Fixed the name reset of the iRidium server driver.
- Fixed Inels Wireless driver.
- Fixed choice of recording format in the database.
- Improved programming view.
- Added import of custom drivers databases.
- Added display licenced tags counter for server project.
- Added number of attempts and scan time to HDL Scanner.
- Improved font handling.
- Improved optimization.
28.10.2019 iRidium Studio 2019 1.3.11.7
- Fixed the KNX LMx driver (Logic Machine), added connection settings.
- DnD commands / feedbacks to Programming View.
- Strict and non-strict select for items in Workspace.
- Added color picker to the script editor.
- Added a new Label item.
- Improved support for old projects.
- Improved studio design.
14.10.2019 iRidium Studio 2019 1.3.11.6
- Improved states panel.
- New colors dialog.
- Added "copy of element state style" to right-click menu.
- Added Drag-n-Drop and double-click to template selection window for static list.
- Added "horizontal scroll" hot key as Shift + mouse wheel.
- Added new Apple devices resolutions.
30.09.2019 iRidium Studio 2019 1.3.10.5
- Fixed fonts dialog.
- Fixed HDL Driver.
- Fixed encripted scripts load.
- Improve i2 and i3 projects support.
- Added BACNET Import.
- Added Emulator button for server projects.
- Added Multi-State Images import to GUI Gallery (jsut drop images with separator '_' to make it).
- Added new alignment tool - Set horizontal / vertical spaces (you can specify the distance between the elements).
16.09.2019 iRidium Studio 2019 1.3.10.4
- Improved old projects support.
- Improved stability.
- Added save project protection when not enough space on the hard drive.
- Added stop playing sounds in the gallery.
- Fixed studio window crash on minimize.
- Fixed projects resize.
02.09.2019 iRidium Studio 2019 1.3.10.3
- Сhanges in server schedules.
- Сhanges in server routines.
- Сhanges in the Yandex Alice driver.
- Сhanges in the transfer.
- Сhanges in the script editor.
- Fixes import to the gallery.
- Added items grouping.
- Added D-n-d in the programming window.
- Added D-n-d in the macro window.
- Added ability to minimize events in the programming window.
- Improved performance.
19.08.2019 iRidium Studio 2019 1.3.10.2
- Corrections in HDL driver.
- Corrections in KNX Router (KNXnet/IP) / Serial (UMC) driver.
- Corrections in Transfer work.
- Start page is added.
- Capability to DnD text is added.
- Interface is improved.
05.08.2019 iRidium Studio 2019 1.3.10.1.17761
- Corrected errors in Windows 7 work.
- Corrections in Virtual driver.
- Corrections in Amazon Alexa Network driver.
- Corrections in Google Home Network driver.
- Corrections in import of TPDesign5 projects.
- Improved work with scripts.
- Improved work with projects from old studio.
- Improved work with studio when opening projects from windows explorer.
- Added import from сsv file (*.csv) to Modbus driver.
22.07.2019 iRidium Studio 2019 1.0.1.17590
- Corrected errors in Windows 7 work.
- Corrections in Virtual driver.
- Corrections in Amazon Alexa Network driver.
- Corrections in Google Home Network driver.
- Corrections in import of TPDesign5 projects.
- Improved work with scripts.
- Improved work with projects from old studio.
- Improved work with studio when opening projects from windows explorer.
- Added import from сsv file (*.csv) to Modbus driver.
08.07.2019 iRidium Studio 2019 1.0.1.17428
- Fixes in the script assistant.
- Fixes for the "Master Project" with Lite modules.
- Fixed work with disabled Aero mode in Windows 7.
- Fixes for the studio gallery.
- Fixes in the Beckhoff ADS driver.
- Fixes in the SNMP driver.
- Added a learning function to the Global Cashe driver.
- Improved the screensaver.
- Improved the quick access panel.
- Design improvements.
- Added import of Simpl project (*.smw) Crestron driver.
21.06.2019 iRidium Studio 2019 1.0.0.17309
- Development of scanner.
- Development of graphic items.
- Development of a server project.
- Development of import from ETS project.
- Development of converting AMX projects.
- Development of search when adding drivers and subdevices.
- Corrections in AV & Custom Systems driver.
- Corrections in Larnitech driver.
- Corrections in Helvar driver.
- Corrections in Domintell driver.
- Corrections in KNX driver.
- Corrections in HDL driver.
- Corrections in Serial drivers.
- Global Cache cloud is added.
- Helvar TCP / UDP driver is added.
- ZWave Network is added.
- Corrections in project merge.
- Corrections in selecting groups of items.
- Corrections in search in all scripts.
- Fast panel is moved down.
- Optimization of working with projects from the Studio of previous versions.
20.05.2019 iRidium Studio 2019 1.0.0.17064
- Added search for channels and feedbacks in the server project.
- Fixes in the HDL driver.
- Corrections to the driver Driver KNX Router.
- Driver BACNet driver fixes.
- Fixes in the AV & Custom Systems driver (TCP / UDP / HTTP).
- Removed Galact DVR driver (beta).
- Fixed a bug with the transfer of text containing Enter.
- Correction of camera bugs from the studio gallery.
- Bug fix with fioat function for levels.
- Added icons to menu items.
- Added support for AMX projects.
- Added import of ETS projects.
15.04.2019 iRidium Studio 2019 1.0.0.16825
Tools:
- Creating a panel project.
- Creating a server project.
- Opening projects.
- View recently used projects.
- Item alignment.
- Text alignment.
- Grid.
- Communications window.
- Item Settings Panel.
Localization:
- Russian.
- English.
- Netherlands.
Studio settings:
- emulator settings.
- workspace settings.
- Backups.
- Setting the project's default graphic theme.
Project Settings:
- Project resize.
- Setting up start pages.
- Screensaver setting.
- Setting project passwords.
- Remote debugging setup.
- Project info.
Server project:
- Driver setup.
- Setting rules.
- Schedule setting.
- System tokens.
- Project Tokens.
Panel project:
- Workspace.
- Graphic elements:
- Button;
- Level;
- Multistate button;
- Multistate level;
- Joistick;
- Editbox;
- List;
- Up / Down button;
- Trigger button;
- Virtual key;
- Static list;
- Linear trend;
- Pie char;
- Bar char;
- Circular level;
- Advanced list.
- Gallery:
- Global Gallery;
- Local Gallery;
- Sounds;
- Cameras;
- Fonts.
- Drivers in the project.
- System tokens.
- Project Tokens.
- System tokens.
- Project Tokens.
- Modules.
Drivers:
- SNMP.
- Sip.
- MQPP.
- Modbus TCP.
- Modbus TCP Server (Slave mode).
- Modbus RTU.
- Mosbus ASCII.
- Lutron.
- KNX Router.
- KNX IP BAOS 771-774 / 777.
- KNX BAOS 770.
- iRidium Server.
- iNels RF.
- Helvar.
- Hdl.
- Global cache.
- Epsnet.
- Elko EP iNels.
- DuoTecno.
- Domintell.
- AV & Custom systems (HTTP).
- AV & Custom systems.
- Crestron.
- Clipsal.
- Beckhoff.
- Bacnet.
- AMX.
- 1-Wire.
Scanners / Importers:
- HDL scanner.
- DuoTecno Scanner.
- Domintell scanner.
Scripts:
- Work with script modules.
- Intellectual hint.
- Script helper.
- Work in a third-party IDE.
