Эта страница является переводом страницы OfflineLicensing. Перевод выполнен на 100%.

---

Offline Licensing

Purchase and use of an offline license in iRidium.

The parameters of the purchased license cannot be changed after purchase. This means that it is impossible to expand it by the number of tags and panels.

An offline license suits objects with isolated local networks (Air-Gapped Network) without access to the Internet thus to iRidi Cloud.

To buy a server with an offline license contaсt iRidi Sales Department at contact@iridi.com.

Comparison of online and offline licensing

We compared licenses for commercial use.

	Online licensing	Offline licensing
Purpose	For any projects	For highly secure government, military and commercial projects without Internet access
Hardware platform	Any iRidi Pro Server platforms	Only for the following iRidi Pro Server platforms : iRidi HS Server ProAV Control Processor Basic ProAV Control Processor Advanced
Way of license activation	Using iRidi Cloud	Using the web interface of iRidi Pro Server and hardware key: for HS Server: You use an USB-key, which is installed in an USB connector by an integrator; for ProAV Control Processor: licensing hardware is installed in production
Work without Interner access and iRidi Cloud	Possible iRidi Pro Server can work autonomously after activating a license and uploading a project from the cloud	Yes
Storing server and visualization projects	In iRidi Cloud	Locally, on iRidi Pro Server, in the encrypted form
Management and distribution of access to visualization projects	With the help of iRidi Cloud	With the help of the web interface of iRidi Pro Server
Downloading visualization projects to panels	From iRidi Cloud	From iRidi Pro Server, in the local network
Authorization in the web interface of iRidi Pro Server	For the first time use the integrator account, then use the password created by the integrator.	Use Password/Recovery password created by the integrator (from version 1.3.83)
Limitations of the functionality of iRidi Pro	No	Yes, see the article for more details
Changing license settings after purchase	Contact iRidi sales department: Contact@iRidi.com	Impossible

Supported hardware platforms

You can use an Offline license only with the following iRidi Pro Server platforms:

• iRidi HS Server
• ProAV Control Processor Basic
• ProAV Control Processor Advanced

HS Server + License key

Activation of an Offline License

To activate iRidi Server offline license, a hardware software license key is used. It allows to the server to work without connection to iRidi Cloud.

Panel and server projects are downloaded to a secure area of the server file system with the help of iRidi Server web-interface.

The web-interface is used to create panel account and to give access rights to visualization projects. i3 pro app and upload of panel projects is done directly via a server in the local network without iRidi cloud.

Use password and recovery password are used to protect against unauthorized access to the settings and the web-interface of the server. The codes contain 6 symbols: Latin letter of upper and lower register and Arabic numerals. A recovery password is used to restore access and to create a new Password, in case the old one is lost or after 3 unseccessful attempts to enter a password.

In case a recovery password is entered 3 times wrongly, access to the administration interface is blocked forever. But uploaded projects will continue their work. To restore access to the server, reset the server to default settings.

To ensure information security:

• password and recovery password codes are stored on the USB-key in a special area using the symmetric AES-128 encryption algorithm.
• The connection between iRidi Pro Server and panels with a visualization interface is possible via the patented iRidium Protocol using the symmetric “Grasshopper” block encryption algorithm with a key length of 256 bits.

Capabilities of a Server with an Offline License

An offline license allows to:

• activate the server without access to the Internet and to iRidi Cloud;
• store visualization and server projects directly on the server in an encrypted form;
• download visualization projects to a panel directly from the server;
• create local account to control access to visualization projects;
• limit access to administrating the server with the help of password and recovery password.

Limitations of an offline license:

• Only the following drivers can work in visualization projects: SIP, IP-cameras, iRidium Server. The remaining drivers can work only on the server;
• Cloud services (PUSH-notifications, project download from the cloud, voice assistants, drivers requiring assignment via iridi.com) do not work;
• Remote control is not available. Panels connect to the server only in the local network;
• Up to 25 panels can be connected to a server with an offline license at the same time.
• It is not possible to connect to a panel activated on another controller.
• With an offline license, it is not possible to transfer projects to the server or client via transfer.
• The iRidi Server driver will not be able to work in the server project.

Server Settings

Activation of an Offline License

Check that you bought a special offline license with a hardware software key. Connect power to the server with a USB key.

Open web interface of the server. Read and accept the offline license terms and conditions, then create password and recovery password codes.

Creating password and recovery password

Starting with version iRidi Server 1.3.83.42431 dated October 10, 2025, full-featured passwords are used to log in to the system.
Logging in with PIN/PUK codes is still available, but when replacing them, you must set full-featured passwords.

before version 1.3.83	from version 1.3.8
6 characters	12-30 characters
Arabic numerals 0-9 and Latin letters A-Z, a-z	Arabic numerals 0-9 and Latin letters A-Z, a-z, special characters

To create the codes it is necessary to:

1 Open the server web interface;

2 Enter the password/recovery password (12-30 characters, Arabic numerals 0-9 and Latin letters A-Z, a-z, special characters).

If you enter the password incorrectly:

• one time - you see the "Attempts left: 3" error, you can try to enter thepassword again (you have 3 attempts left);
• two times - you see the "Attempts left: 2" error, you can try to enter the password again in 5 minutes (you have 2 attempts left);
• three times - you see the "Attempts left: 1" error, you can try to enter the password again in 1 hour (you have 1 attempt left);
• four times - you have no attempts left to enter the password, you see the page for entering the recovery password in 4 hours.

If you enter the recovery password incorrectly:

• one time - you see the "Attempts left: 2" error, you can try to enter the recovery password again in 24 hours (you have 2 attempts left) ;
• two times - you see the "Attempts left: 1" error, you can try to enter the recovery password again in 24 hours (you have 1 attempt left);
• three times - blocking occurs

After you authorize in the web interface with the password, you have 30 minutes before the session is automatically ended. To re-enter the web interface, authorize with your password again.

</div>

Editing password and recovery password

The password/recovery password are changed on the SYSTEM tab in Security section. To change the code, it is necessary to enter the old code and repeat the new code twice. Then click the "Change password" button.

Project Upload

1 To upload projects in the web interface of the server, go to the Projects tab in the Control section;

2 Press the "Select File" button;

3 Select the server or panel project file in Explorer;

4 Click "upload file";

5 The uploaded projects will be displayed in the web interface.

Only one server project can be on the server. When you uploading panel projects again, the "replace or upload as new project" popup appears. "Replace" means that the project of the same name will be replaced by a new one. Uploading "as new" will upload the project to the server and add the index to the name.

The "Projects" section contains information about used server memory. If memory is not enough you can't upload projects to the server. If it is necessary you can delete unused projects from the server to free memory.

Project Administration

Server Project

At the moment, you can only delete a server project or replace the current project with a new one.

Panel Project

A panel project can be deleted, replaced or the project name changed.

Deleting

Сlick on the trash can button to delete a project. A remote project will no longer be available to users.

Editing a panel project

Click on the pencil icon in the list of projects to edit the panel project. The Edit Panel Project dialog opens after clicking.

In the edit dialog you can change the project name and replace the panel project itself.

To "change the name" you need to enter a new name in the "Name" field.

In the edit dialog click the "Select File" button and select the desired project in Explorer to "Replace Panel Project". If the project was active at the time of replacement, the new project will be automatically loaded on the control panel.

Creation of Users (Panel Accounts)

To connect a panel to the server, a panel account must be created in the server web-interface. Several panels can be authorized in one account.

To create an account, go to the Panel accounts section of the web-interface and click Add new account.

There are two possible types of accounts: integrator and end user. An End user can download visualization projects to a panel and use downloaded projects. An Integrator has the same rights and in addition can change priject settings on the system menu of i3 pro.

A panel account must have a login and password for protection against unathorized access. This login is also used to authorize in i3 pro. You can also choose a list of available projects for this account and edit it later on. An account can be deleted. When an account is deleted, all panels authorized in this account are unauthorized and projects are deleted.

User Administration

Administrator (Integrator)

There is always a default user on the server. A login (Integrator) and password are defined for it. Administrator account is not editable. All projects on the server are available for this account.

Account Editing

1. In the web interface of the server, go to the Projects tab in the Panel accounts section;
2. Click on the edit button (pencil) next to the user name;
3. In the opened window you can change the account type and/or the available projects.

After the password is changed, all active sessions created for this user will end. Log in to the user account again in the control panel and upload the required project.

Deleting a User

1. In the web interface of the server, go to the Projects tab in the Panel accounts section;
2. Click on the delete button (trash can) next to the user name;
3. Confirm action.

Server Update

Update via file

To update a server via file, do the following:

1. Prepare the update file (download the latest file version from the iridi.com website).
2. Go to the server web-interface, open the Info > SYSTEM tab and press the Update button. You see the window of server updating.
3. In this window press the Select file button and choose the update file.
4. After you choose the update file, a new server version starts installing.

Update via link

To update a server via link, do the following:

1. Copy the link to download a file from iridi.com.
2. Go to the server web-interface, open the Info > SYSTEM tab and press the Update button. You see the window of server updating.
3. In this window paste the copied link in the Enter URL field and press the UPDATE button.
4. Then a new server version starts installing.

Deactivation of Server

1 To deactivate the server go to the Deactivate Server tab in the CONTROL section.

2 Press the Deactivate server button, enter the recovery password code in the opened window, confirm server deactivation.

When you deactivate the server, the following data will be deleted:

• recovery password,
• password,
• all panel projects,
• user project,
• all created account data.

Uploading Projects to the Control Panel

To connect a panel to the server and for further access to projects authorize on a control panel - choose Enter with login and password. To work in the offline mode open authorization settings and choose Local connection mode. Enter the login and password from a panel account created earlier then enter the local IP-address of the server with an offline license.